Motorola AP-7131 Series Manual de usuario

INSTALLATION

AP-7131 Series Access Point

Installation Guide

1.0 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1.1 Document Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

1.2 Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

1.3 Site Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

2.0 Hardware Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2.1 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2.2 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2.3 AP-7131 Placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2.4 Mounting the AP-7131 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

2.5 LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

3.0 Basic AP-7131 Configuration . . . . . . . . . . . . . . . . . . . . . . . . . 24

3.1 Resetting the Access Point’s Password . . . . . . . . . . . . . . . . . . . . 26

3.2 Configuring "Basic" Device Settings . . . . . . . . . . . . . . . . . . . . . . . 26

3.3 Where to Go From Here? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

4.0 Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

4.1 AP-7131 Physical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . 38

4.2 AP-7131N Physical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . 38

4.3 Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

4.4 AP-7131 Radio Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

4.5 AP-7131N Radio Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . 40

Contents

5.0 Regulatory Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

6.0 Waste Electrical and Electronic Equipment (WEEE) . . . . . . 47

7.0 Motorola’s Enterprise Mobility Support Center . . . . . . . . . . 49

8.0 AP-7131 Series ROHS Compliance . . . . . . . . . . . . . . . . . . . . . 50

MOTOROLA and the Stylized M Logo are registered in the US Patent &

Trademark Office. Symbol is a registered trademark of Symbol Technologies,

Inc. All other product or service names are the property of their respective

Introduction 1

1 Introduction

As a standalone access point, an AP-7131 series access point provides small and medium-sized

businesses with a consolidated wired and wireless networking infrastructure, all in a single device.

The integrated router, gateway, firewall, DHCP and Power-over-Ethernet (PoE) simplify and reduce the

costs associated with networking by eliminating the need to purchase and manage multiple pieces

of equipment.

The access point is also designed to meet the needs of large, distributed enterprises by converging

the functionality of a thick access point and thin access port into a single device. This mode enables

the deployment of a fully featured intelligent access point that can be centrally configured and

managed via a Motorola wireless switch in either corporate headquarters or a network operations

center (NOC). In the event the connection between the access point and the wireless switch is lost,

a Remote Site Survivability (RSS) feature ensures the delivery of uninterrupted wireless services at

the local or remote site. All traffic between the adaptive access points and the wireless switch is

secured though an IPSec tunnel. Additionally, compatibility with Motorola’s RF Management Suite

(RFMS) allows you to centrally plan, deploy, monitor and secure large deployments.

With the introduction of the AP-7131 4.x firmware baseline, Motorola is also introducing a new series

of AP-7131N model access points as a compliment to the existing AP-7131 access point family. The

new AP-7131N model access points support the same feature set as existing AP-7131 model access

points, however AP-7131N access points support a three radio model (with the third radio dedicated

exclusively to WIPS support).

If new to the AP-7131 series or access point technology in general, refer to the AP-7131 Series

Product Reference Guide to familiarize yourself with access point technology and the feature set

exclusive to the AP-7131 family. The guide is available, at

http://support.symbol.com/support/product/manuals.do.

NOTE Both the AP-7131 and AP-7131N model access points share the same

Web applet (user interface) and installation methods. Therefore, the UI

and installation descriptions within this guide apply to both models.

AP-7131 Series Access Point: Installation Guide

1.1 Document Conventions

The following graphical alerts are used in this document to indicate notable situations:

1.2 Warnings

•Read all installation instructions and site survey reports, and verify correct equipment installation before

connecting the access point to its power source.

•Remove jewelry and watches before installing this equipment.

•Verify that the unit is grounded before connecting it to the power source.

•Verify that any device connected to this unit is properly wired and grounded.

•Connect all power cords to a properly wired and grounded electrical circuit.

•Verify that the electrical circuits have appropriate overload protection.

•Attach only approved power cords to the device.

•Verify that the power connector and socket are accessible at all times during the operation of the

equipment.

•Do not work with power circuits in dimly lit spaces.

•Do not install this equipment or work with its power circuits during thunderstorms or other weather

conditions that could cause a power surge.

•Verify there is adequate ventilation around the device, and that ambient temperatures meet equipment

operation specifications.

1.3 Site Preparation

•Consult your site survey and network analysis reports to determine specific equipment placement, power

drops, and so on.

•Assign installation responsibility to the appropriate personnel.

•Identify and document where all installed components are located.

•Provide a sufficient number of power drops for your equipment.

•Ensure adequate, dust-free ventilation to all installed equipment.

•Identify and prepare Ethernet and console port connections.

•Verify that cable lengths are within the maximum allowable distances for optimal signal transmission.

NOTE Tips, hints, or special requirements that you should take note of.

CAUTION Care is required. Disregarding a caution can result in data loss or

equipment malfunction.

WARNING! Indicates a condition or procedure that could result in personal injury or

equipment damage.

Hardware Installation 3

2 Hardware Installation

An AP-7131 or AP-7131N access point installation includes mounting the access point, connecting

the access point to the network, connecting antennae and applying power. Installation procedures

vary for different environments.

Both an AP-7131 and AP-7131N model access point have the following port designations:

• GE1/POE - LAN port

• GE2 - WAN Port

2.1 Precautions

Before installing an AP-7131 or AP-7131N model access point, verify the following:

• Do not install in wet or dusty areas without additional protection. Contact a Motorola

representative for more information.

• Verify the environment has a continuous temperature range between -20° C to 50° C.

2.2 Package Contents

Check package contents for the correct model AP-7131 and applicable AP-7131 accessories. Each

available configuration (at a minimum), contains:

• AP-7131 or AP-7131N model access point (accessories dependent on SKU ordered)

• AP-7131 Series Install Guide (this guide, supporting both AP-7131 and AP-7131N models)

• Wall mount screw and anchor kit

• Accessories Bag (4 rubber feet and a LED light pipe and badge with label for above the

ceiling installations)

Contact the Motorola Support Center to report missing or improperly functioning items.

NOTE Some access points ship with a protective cover (facade) or a 6-element

MIMO antenna. The cover disconnects from the access point as

illustrated on the next page. When attached, LEDs continue to illuminate

through the cover.

AP-7131 Series Access Point: Installation Guide

2.3 Access Point Placement

For optimal performance, install the access point away from transformers, heavy-duty motors,

fluorescent lights, microwave ovens, refrigerators and other industrial equipment. Signal loss can

occur when metal, concrete, walls or floors block transmission. Install the access point in an open

area or add access points as needed to improve coverage.

Antenna coverage is analogous to lighting. Users might find an area lit from far away to be not bright

enough. An area lit sharply might minimize coverage and create dark areas. Uniform antenna

placement in an area (like even placement of a light bulb) provides even, efficient coverage.

Place the access point using the following guidelines:

• Install the access point at an ideal height of 10 feet from the ground.

• Orient the access point antennas vertically for best reception.

• Point the access point antennas downward if attaching to the ceiling.

To maximize the access point’s radio coverage area, Motorola recommends conducting a site survey

to define and document radio interference obstacles before installing the access point.

Otros manuales para AP-7131 Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Punto de acceso inalámbrico de Motorola

Motorola

Motorola WS2000 - Wireless Switch - Network Management... Manual de usuario

Motorola

Motorola AP-6521 Series Manual de usuario

Motorola

Motorola AP6522 Manual de usuario

Motorola

Motorola TLN3221B Manual de usuario

Motorola

Motorola AP-7131 Series Manual de instalación y operación

Motorola

Motorola MOTOMESH Duo 4300-49 Manual de usuario

Motorola

Motorola WA840G Instrucciones de funcionamiento

Motorola

Motorola AP-6521E Manual de usuario

Motorola

Motorola WA840GV2 Manual de usuario

Motorola

Motorola MC-802 Manual de usuario

Motorola

Motorola PMP 320 Manual de usuario

Motorola

Motorola AP-7131 Series Manual de instalación y operación

Motorola

Motorola AP-5181 - Wireless Access Point Guía de referencia rápida

Motorola

Motorola AP6562 Manual de usuario

Motorola

Motorola AP-7532 Manual de usuario

Motorola

Motorola AP-7131 Series Manual de instalación y operación

Motorola

Motorola AP-7522 Manual de usuario

Motorola

Motorola AP-650 Series Manual de usuario

Motorola

Motorola AP-6511 Manual de usuario

Motorola

Motorola Verizon VAP2500 Manual de usuario

Motorola

Motorola WA840G Manual de usuario

Motorola

Motorola WiNG 5.4.2 Manual de usuario

Motorola

Motorola AP-7131 Series Cómo utilizar

Motorola

Motorola MotoWI4 PTP 600 Series Manual de usuario

Manuales populares de Punto de acceso inalámbrico de otras marcas

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manual de usuario

Ubiquiti

Ubiquiti NanoStation NSM2 Manual de usuario

Cisco

Cisco Aironet 1550 Series Manual de usuario

Aruba

Aruba IAP-335 Manual de usuario

Advantek Networks

Advantek Networks AWN-AP-54MR Manual de usuario

IP-COM

IP-COM AP355 Manual de usuario

Buffalo

Buffalo AirStation WLA-L11G Manual de usuario

EnGenius

EnGenius EnStationACv2 Manual de usuario

D-Link

D-Link DAP-3662 Manual de usuario

xG Technology

xG Technology xMax CN1300 Manual de usuario

Widelink

Widelink ezWave WAP-1100 Series Manual de usuario

Edimax

Edimax CAP1200 Manual de usuario

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manual de usuario

Aruba

Aruba AP-203R Manual de usuario

LuXout Shades

LuXout Shades LUXSHADE MOTION Manual de usuario

CreatComm

CreatComm TB5F Manual de usuario

SineDigital

SineDigital MW-1500AP(H) Manual de usuario

TP-Link

TP-Link AP9650 V1 Manual de usuario