Motorola H270 - Headset - Over-the-ear Manual de usuario
Universal Bluetooth®
Headset H270
H270 MOTOMANUAL
1
Figure 2
Figure 1
1
2
6
54
3
2
Figure 3
Figure 4
English
3
European Union Directives Conformance Statement
Hereby, Motorola Inc., declares that this H270 is in compliance
with the essential requirements and other relevant provisions of
Directive 1999/5/EC.
You can view your product’s Declaration of Conformity (DoC) to Directive
1999/5/EC (the R&TTE Directive) at www.motorola.com/rtte.
Caring for the Environment by Recycling
When you see this symbol on a Motorola product, do not dispose
the product with household waste.
Recycling Mobile Phones and Accessories
Do not dispose of mobile phones or electrical accessories, such as chargers
or headsets, with your household waste. In some countries or regions,
collection systems are set up to handle electrical and electronic waste items.
Contact your regional authorities for more details. If collection systems aren’t
available, return unwanted mobile phones or electrical accessories to any
Motorola Approved Service Centre in your region.
FCC Notice to Users
Users are not permitted to make changes or modify the device in any way.
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment. See-
47-CFR-Sec.-15.21.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation. See-47-CFR-Sec.-15.19(3).
English
4
Before you begin
See figure 1 on page 1.
Take a moment before you get started to familiarize yourself with your new
H270 Headset.
1. Volume button
2. Speaker
3. Call button
4. Power switch
5. Indicator light
6. Microphone
Charging your headset
See figure 2 on page 1
Verify slide switch is in the off position (toward the charging port).
The indicator light turns on when the battery is charging. It may take up to 60
seconds for the indicator light to turn on. When the headset’s battery is fully
charged (about 2 hours), the indicator light is steadily lit in blue.
Note: Headset is not functional while charging.
This product uses a lithium ion, rechargeable, non-replaceable battery.
Under normal use, the expected life of the rechargeable battery is
approximately 400 charges.
Your battery is designed to last the life of the product. It should only
be removed by a recycling facility. ANY ATTEMPT TO REMOVE OR
REPLACE YOUR BATTERY WILL DAMAGE THE PRODUCT.
English
5
Wearing your headset
You can wear your H270 headset on your left or right ear. The headset comes
ready for the right ear.
Placing the headset on your right ear : See figure 3 on page 2
Placing the headset on the left ear : See figure 4 on page 2
Turning headset on and off
To turn ON your headset, slide the switch toward the microphone. The
indicator light flashes blue 3 times, then :
UÊÊÊy>ÃiÃÊÊLÕiÊ>`Ê«ÕÀ«iÊvÊ«>Ài`Ê>`ÊViVÌi`ÊÜÌÊ>ÌiÀÊ`iÛVi®°
UÊÊÊLiViÃÊÃÌi>`ÞÊLÕiÊvÊÀi>`ÞÊÌÊLiÊ«>Ài`®°
To turn OFF your headset, slide the switch toward the charging plug. The
indicator light flashes 3 times then turns off.
English
6
Pairing your headset
Your phone’s Bluetooth feature is off by default. To use your headset, turn
on the Bluetooth feature in your phone. Please check your phone’s user’s
guide.
Note : The Bluetooth feature remains on until you turn the feature off.
Before you can use your headset, you must pair it with your phone.
1 Ensure headset is in pairing mode
Power on headset by sliding the Power switch towards the microphone to
initiate easy pairing. After a few moments, the indicator light will be steadily
lit in blue to indicate headset is in pairing mode.
If the headset does not enter pairing mode, see “Troubleshooting” for help.
2 Set your phone to look for your headset
UÊÊÊ*iÀvÀÊ >Ê `iÛViÊ `ÃVÛiÀÞÊ vÀÊ ÌiÊ «i°Ê ÀÊ `iÌ>ÃÊ >LÕÌÊ `iÛViÊ
discovery, consult your phone’s user’s guide. The phone lists Bluetooth
devices it finds.
UÊÊÊ-iiVÌÊ Motorola H270 in the list of discovered devices and confirm by
following the on-screen prompts.
UÊÊÊ7iÊ«À«Ìi`ÊLÞÊÌiÊ«i]ÊiÌiÀÊÌiÊ«>ÃÃiÞÊ0000 and confirm.
Pairing is successful when the headset indicator light changes from steadily
lit to flashing blue and purple.
English
7
Test and use
Your phone and headset are now paired and ready to make and receive calls.
To confirm they are successfully paired and operating properly, place the
headset over your ear and make a call from your phone. You will hear ringing
from the headset.
After you have successfully paired your phone and headset, you do not need
to repeat these steps each time you use the headset.
Note: If desired, your headset can be restored to original factory settings.
This action will erase all pairing information stored in your headset. Thus,
you will need to pair your phone and headset again. To restore your headset
to original factory settings, press and hold both Volume and Call buttons at
the same time and slide Power switch to ON.
Using your headset: making & receiving calls
Your headset supports both Hands-free and Headset Profiles. Accessing
call functions depends upon which profile your phone supports. See your
phone’s user’s guide for more information.
Note: Some features are phone/network dependent.
Function Action
Receive a call Tap the call button
End a call Tap the call button
Reject a call Press and hold a volume button until the
ringer stops
Make a voice dial call Tap the call button and wait for voice
prompt
Answer second incoming call Use phone to answer (follow your phone’s
instructions)
English
8
Indicator lights
Charging status (with charger plugged in)
Headset Indicator Headset Status
Red Charging (below 70% charge)
Purple Charging (above 70% charge)
Blue Charging complete
Operating status (with no charger plugged in)
Headset Indicator Headset Status
Off Power off
3 blue flashes Powering on/off
Steady blue Pairing mode
Rapid blue/purple flashes Connection successful
Quick blue flash Incoming/outgoing call
Slow blue pulse Connected (on a call)
Slow blue flash Standby (not on a call)
Slow red flash Idle (not connected to phone)
Slow purple pulse Connected call muted
Steady red Attempting to connect
Quick red flash Low battery
Note: After 30 minutes on a call or of inactivity, the light stops flashing to
conserve power, but the headset remains on.
English
9
Audio tones
Audio Tone Headset Status
Ascending tone Powering on
2 descending tones Powering off
Ring tone Incoming call
1 Short tone when pressing Volume level (high, medium, or low)
Volume button
High/low tones repeated Low battery
every 60 sec.
No audio indications; Out of range
deteriorating quality
2 ascending tones Connected to phone
Otros manuales para H270 - Headset - Over-the-ear
4
Tabla de contenidos
Otros manuales de Auriculares de Motorola
Motorola
Motorola H270 - Headset - Over-the-ear Manual de usuario
Motorola
Motorola H390 - Headset - In-ear ear-bud Manual de usuario
Motorola
Motorola HX550 Manual de usuario
Motorola
Motorola S605 Manual de usuario
Motorola
Motorola H790 - Headset - Monaural Manual de usuario
Motorola
Motorola HX1 - Endeavor - Headset Manual de usuario
Motorola
Motorola HK201 Manual de usuario
Motorola
Motorola PMLN8083 Manual de usuario
Motorola
Motorola 89504N Manual de usuario
Motorola
Motorola H690 Manual de usuario
Motorola
Motorola Motostart H700 Manual de usuario
Motorola
Motorola BOOM Manual de usuario
Motorola
Motorola H715 - Headset - Over-the-ear Manual de usuario
Motorola
Motorola H720 Manual de usuario
Motorola
Motorola Tracks Air Manual de usuario
Motorola
Motorola HK255-S Manual de usuario
Motorola
Motorola VERVE ONES ME Manual
Motorola
Motorola HS810 - Headset - Over-the-ear Manual de usuario
Motorola
Motorola Tracks Air Instrucciones de instalación
Motorola
Motorola H670 - Headset - Over-the-ear Manual de usuario
