Motorola HX1 - Endeavor - Headset Manual de usuario
Quick Start Guide
MOTOROLA
ENDEAVOR HX1
congratulations
Talk hands free where you never have before on
the MOTOROLA
ENDEAVOR
HX1 headset thanks
to Motorola’s revolutionary CrystalTalk™ technology
with a stealth mode, delivering an unmatched
headset audio performance even in the fiercest
conditions.
First of all, reduce everyday background noise with
the default CrystalTalk mode which utilizes dual
microphone noise cancellation technology.
Then, if background noise and wind reach extreme
levels, switch on stealth mode to activate true bone
conduction and seal off all background noise from
your conversation so you know you’re being heard.
As you speak, the stealth mode sensor captures
your vocal vibrations and seamlessly converts them
to speech so the listener hears your voice only.
your headset
1
your headset
Take a moment to familiarize yourself with your
new
ENDEAVOR
HX1 Headset.
Warning:
DO NOT apply pressure or squeeze
the stealth mode sensor (small rubber balloon) as
it can damage the parts inside and will void the
warranty.
Earhook
Charging
Port
Volume
Buttons
Call
Button
stealth mode
button
Power
Switch
Indicator
Light
Speaker and
stealth
mode
sensor
Ear Loop
charge it
2
charge it
You'll need to charge your headset before you
can use it. While charging, the battery indicator
light is red. It turns green when the battery is
fully charged.
Note:
Headset is not functional while charging.
Note:
Your battery is designed to last the life of
your product. It should only be removed by a
recycling facility. Any attempt to remove or
replace your battery will damage your headset.
pair & connect
3
pair & connect
Let’s get your headset paired and connected to
your Bluetooth phone(s).
pair & connect first phone
1
Turn off any Bluetooth devices previously
paired with your headset.
2
Turn on the Bluetooth feature on your
phone.
3
Put the headset on your ear (see “wear it”
on page 11 for help).
4
Turn on your headset (see page 15 for help).
The indicator light becomes steadily lit in blue
and you hear “ready to pair”.
pair & connect
4
5
Follow voice prompts to connect your phone
to your headset.
Note:
When prompted for the passkey,
enter
0000
.
When your headset successfully pairs with your
phone, you hear “pairing complete”. When
connected, you hear “phone 1 connected” and
see the indicator light rapidly flash in blue and
purple.
pair & connect second phone
(optional)
1
Turn off first phone and any other Bluetooth
devices previously paired with your headset.
2
Turn your headset off (see “turn off” on
page 15 for help).
pair & connect
5
3
Turn on the Bluetooth feature on your
phone.
4
Put headset on your ear.
5
Turn on your headset.
The indicator light becomes steadily lit in
blue
and
you hear
“ready to pair”
.
6
Follow voice prompts to connect your phone
to your headset.
When your headset successfully pairs with your
phone, you hear
“pairing complete”
. When
connected, you hear “phone 1 connected” and
see the indicator light rapidly flash in blue and
purple.
To connect to both phones, simply turn on the
first phone while the second phone is
connected. When you hear “phone 2
pair & connect
6
connected”, your headset is connected to both
phones. The last paired phone (your second
phone) is now your primary phone (or “phone 1”)
for voice dial functionality.
test your connection
1
Place the headset on your ear.
2
On one phone, dial a number and press the
Call/Send
key. Repeat for the second
phone.
If your phone and headset are successfully
connected, you hear ringing on the headset.
For daily use, make sure your headset is turned
on, and your phone’s Bluetooth feature is on.
Your headset and phone will connect
automatically.
enable stealth mode
7
enable stealth mode
Be sure you are always heard during calls with
both CrystalTalk and stealth modes:
•
CrystalTalk is the default mode and is
always active to cancel out everyday
background noise.
•
Stealth mode can be activated when
noise and wind reach extreme levels to
seal off all background noise.
turn stealth mode on & off
To a ctivate stealth mode
, press the dedicated
stealth mode button while dialing a call, receiving
a call, or while in a call.
To d e a ctivate stealth mode
, press the stealth
mode button while in a call, or turn off the
headset.
enable stealth mode
8
A voice prompt (“stealth mode on” or “stealth
mode off”) or tone always confirms change to
stealth mode status.
Note:
When using stealth mode, it is essential
that the stealth mode sensor is placed correctly
and is in contact with the ear canal (see step 3
on page 12). It is normal for the sound of your
voice to be less “natural” in stealth mode.
Otros manuales para HX1 - Endeavor - Headset
1
Tabla de contenidos
Idiomas:
Otros manuales de Auriculares de Motorola
Motorola
Motorola Motopure H15 - H15 Noise-Canceling Bluetooth Wireless... Guía de inicio rápido
Motorola
Motorola HS805 - Headset - Over-the-ear Manual de usuario
Motorola
Motorola 6809494A40-O Manual de usuario
Motorola
Motorola HT820 - Headset - Behind-the-neck Manual de usuario
Motorola
Motorola PMLN7269 Manual de usuario
Motorola
Motorola HK250 Manual de usuario
Motorola
Motorola H12 - MOTOPURE H12 - Headset Manual de usuario
Motorola
Motorola HK255 Manual de usuario
Motorola
Motorola Moto Hint Instrucciones de instalación
Motorola
Motorola PMLN6635 Manual de usuario
Motorola
Motorola H720 Manual de usuario
Motorola
Motorola HS805 Manual de usuario
Motorola
Motorola 98405RH Manual de usuario
Motorola
Motorola Core Ultra-Lite PMLN5102 Manual de usuario
Motorola
Motorola Finiti HZ800 Manual de usuario
Motorola
Motorola H17txt Manual de usuario
Motorola
Motorola H375 - Headset - Over-the-ear Manual de usuario
Motorola
Motorola HS801 Manual de usuario
Motorola
Motorola VERVE ONES ME Manual
Motorola
Motorola H390 - Headset - In-ear ear-bud Manual de usuario
