Motorola M68EML08GZ16 Manual de usuario

EML08GZ16UM/D

Version 4.0

March 3, 2003

User’s Manual

M68EML08GZ16 Emulation Module - Version 4.0 User’s Manual

2MOTOROLA

Important Notice to Users

While every effort has been made to ensure the accuracy of all information in

this document, Motorola assumes no liability to any party for any loss or

damage caused by errors or omissions or by statements of any kind in this

document, its updates, supplements, or special editions, whether such errors are

omissions or statements resulting from negligence, accident, or any other cause.

Motorola further assumes no liability arising out of the application or use of any

information, product, or system described herein: nor any liability for incidental

or consequential damages arising from the use of this document. Motorola

disclaims all warranties regarding the information contained herein, whether

expressed, implied, or statutory, including implied warranties of

merchantability or fitness for a particular purpose. Motorola makes no

representation that the interconnection of products in the manner described

herein will not infringe on existing or future patent rights, nor do the

descriptions contained herein imply the granting or license to make, use or sell

equipment constructed in accordance with this description.

Trademarks

This document includes these trademarks:

Motorola and the Motorola logo are registered trademarks

of Motorola, Inc.

Windows is a registered trademark of Microsoft Corporation in the U.S.

and other countries.

Intel is a registered trademark of Intel Corporation.

Motorola, Inc., is an Equal Opportunity / Affirmative Action Employer.

For an electronic copy of this book, visit Motorola’s web site at http://e-www.motorola.com/

User’s Manual M68EML08GZ16 Emulation Module - Version 4.0

MOTOROLA Table of Contents 3

User’s Manual — M68EML08GZ16 Emulation Module

Table of Contents

M68EML08GZ16 Quick Start Guide

1 - Set jumpers W4, W5 and W6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

2 - Install the emulation module into your development system . . . . . 9

3 - Connect the emulation module to your target system . . . . . . . . . . 10

4 - Install the development software. . . . . . . . . . . . . . . . . . . . . . . . . . 10

5 - Copy personality files to your computer . . . . . . . . . . . . . . . . . . . . 11

6 - Connect MMDS or MMEVS to your computer and apply power 11

Section 1. General Information

1.1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

1.2 Development Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

1.2.1 Motorola Modular Development System (MMDS0508). . . . . . . . 13

1.2.2 Motorola Modular Evaluation System (MMEVS0508). . . . . . . . . 14

1.3 System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

1.4 EM Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

1.5 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

1.6 Target Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Section 2. Preparation and Operation

2.1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

2.2 Configuring Board Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

2.3 Limitations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

2.4 Remaining System Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

M68EML08GZ16 Emulation Module - Version 4.0 User’s Manual

4 Table of Contents MOTOROLA

Table of Contents

Section 3. Support Information

3.1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

3.2 Target Connectors J2 and J3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

3.3 Logic Analyzer Connectors J1 and J13 . . . . . . . . . . . . . . . . . . . . . . . 28

3.4 Inverted Clock Connector J12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

3.5 Analog-to-Digital Converter Reference Voltage Connector E4. . . . . 30

3.6 Board Factory Test Connector J14 . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

3.7 Optional crystal circuit using Y1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

3.8 Clock oscillator Y2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

3.9 EM Board Socket Connectors P1 and P2 . . . . . . . . . . . . . . . . . . . . . . 31

User’s Manual M68EML08GZ16 Emulation Module - Version 4.0

MOTOROLA List of Figures 5

User’s Manual — M68EML08GZ16 Emulation Module

List of Figures

1-1 M68EML08GZ16 Emulator Module. . . . . . . . . . . . . . . . . . . . . . . . . 16

1-2 Target Cable Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

3-1 Target Connector J2 Pin Assignments. . . . . . . . . . . . . . . . . . . . . . . . 25

3-2 Target Connector J3 Pin Assignments. . . . . . . . . . . . . . . . . . . . . . . . 27

3-3 Logic Analyzer Connector J1 Pin Assignments . . . . . . . . . . . . . . . . 28

3-4 Logic Analyzer Connector J13 Pin Assignments . . . . . . . . . . . . . . . 29

3-5 Connector J12 Pin Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

3-6 Connector E4 Pin Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

3-7 EM Connector P1 Pin Assignments. . . . . . . . . . . . . . . . . . . . . . . . . . 32

3-8 EM Connector P2 Pin Assignments. . . . . . . . . . . . . . . . . . . . . . . . . . 34

M68EML08GZ16 Emulation Module - Version 4.0 User’s Manual

6 List of Figures MOTOROLA

List of Figures

User’s Manual M68EML08GZ16 Emulation Module - Version 4.0

MOTOROLA List of Tables 7

User’s Manual — M68EML08GZ16 Emulation Module

List of Tables

1-1 Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

1-2 M68EML08GZ16 Target Cable and Head Assemblies. . . . . . . . . . . 17

2-1 Configuration Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

3-1 Target Connector J2 Signal Descriptions . . . . . . . . . . . . . . . . . . . . . 26

3-2 Target Connector J3 Signal Descriptions . . . . . . . . . . . . . . . . . . . . . 27

3-3 Logic Analyzer Connector J1 Signal Descriptions . . . . . . . . . . . . . . 28

3-4 Logic Analyzer Connector J13 Signal Descriptions . . . . . . . . . . . . . 29

3-5 Connector J12 Signal Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . 30

3-6 Connector E4 Signal Descriptions. . . . . . . . . . . . . . . . . . . . . . . . . . . 30

3-7 EM Connector P1 Signal Descriptions . . . . . . . . . . . . . . . . . . . . . . . 33

3-8 EM Connector P2 Signal Descriptions . . . . . . . . . . . . . . . . . . . . . . . 35

M68EML08GZ16 Emulation Module - Version 4.0 User’s Manual

8 List of Tables MOTOROLA

List of Tables

User’s Manual M68EML08GZ16 Emulation Module - Version 4.0

MOTOROLA M68EML08GZ16 Quick Start Guide 9

User’s Manual — M68EML08GZ16 Emulation Module

M68EML08GZ16 Quick Start Guide

Make sure that power is disconnected from your M68EML08GZ16 Emulator

Module and from your target system. Then follow these quick-start steps to

make your M68EML08GZ16 ready for use as quickly as possible.

1 - Set jumpers W4, W5 and W6

Jumper header W4 specifies the clock source for the MCU when you enable its

external clock.

• Place the jumper between pins 3 and 4 (factory default) to specify the

debugger-controlled oscillator from the platform board or place the

jumper between pins 1 and 2 to specify 4.9152-MHz oscillator Y2, which

can be replaced with an oscillator of a different value.

Jumper header W5 specifies the MCU flash size.

• Place the jumper in the appropriate location for the flash size of the MCU

you want to emulate. Valid emulation MCUs are MC68HC908GZ16,

MC68HC908GR16, MC68HC908GZ8, MC68HC908GR8, or

MC68HC908GR4.

Jumper header W6 specifies an HC08GZ or HC08GR family MCU.

• Place the jumper between pins 2 and 3 (factory default) to specify an

HC08GZ family MCU or place the jumper between pins 1 and 2 to

specify an HC08GR family MCU.

2 - Install the emulation module into your development system

To use the M68EML08GZ16 in an MMDS0508 Motorola Modular

Development System (MMDS) or MMEVS0508 Motorola Modular

Evaluation System (MMEVS):

• Remove the access panel of the MMDS station-module enclosure.

M68EML08GZ16 Emulation Module - Version 4.0 User’s Manual

10 M68EML08GZ16 Quick Start Guide MOTOROLA

M68EML08GZ16 Quick Start Guide

• Insert the M68EML08GZ16 through the access-panel opening.

• Fit together M68EML08GZ16 connectors P1 and P2 (on the bottom of

the board) to connectors P11 and P12, respectively, of the MMDS or

MMEVS (P6 and P7 on some MMEVS boards) control board and snap

the corners of the M68EML08GZ16 onto the plastic standoffs.

3 - Connect the emulation module to your target system

Use the supplied target flex cable, appropriate target head adapter, and surface

mount adapter. Plug the appropriate end of the flex cable plugs into

M68EML08GZ16 connectors J2 and J3.

• If the M68EML08GZ16 is in an MMDS station module, run the flex

cable through the slit in the station-module enclosure, then replace the

access panel.

• Plug the other end of the flex cable into the target head. Solder the

appropriate surface mount adapter to your target if necessary. Then plug

the target head into the surface mount adapter on your target system.

4 - Install the development software

Tabla de contenidos

Otros manuales de Unidad de control de Motorola

Motorola

Motorola MVME2400 Series Guía de inicio rápido

Motorola

Motorola IXP-9120 Manual de usuario

Motorola

Motorola M68EM05C0 Manual de usuario

Motorola

Motorola MVME224A Series Manual de usuario

Motorola

Motorola HC05BS8 Manual de usuario

Motorola

Motorola M68EM05D32 Manual de usuario

Motorola

Motorola MVME712-10 Manual de usuario

Motorola

Motorola DSP56F826EVM Instrucciones de uso

Motorola

Motorola ASTRO APX O9 Manual de usuario

Motorola

Motorola WA9901 Instrucciones de montaje

Motorola

Motorola MVME760 Manual de usuario

Motorola

Motorola MVME712M Guía de inicio rápido

Motorola

Motorola Canopy Manual de usuario

Motorola

Motorola M68705EVM Manual de usuario

Motorola

Motorola MVME2300 Series Guía de inicio rápido

Motorola

Motorola MVME2400 Series Manual de usuario

Motorola

Motorola 56F827 Instrucciones de uso

Motorola

Motorola G24 Guide Manual de instrucciones

Motorola

Motorola Canopy Backhaul Module Manual de usuario

Motorola

Motorola MVME147 Guía de inicio rápido

Motorola

Motorola MVME2300SC Series Guía de inicio rápido

Motorola

Motorola ACE3600 RTU Manual de usuario

Motorola

Motorola C24 CDMA 1X Manual de usuario

Motorola

Motorola 56F8346 Manual de usuario

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario