Motic BA410E Series Manual de usuario

Note

BA410ESeries

Biological Microscope

Instruction Manual

WWW.MOTIC.COM

MOTIC INCORPORATION LTD.

If the equipment is used in a manner

not specified by the manufacturer,

the protection provided by the

equipment may be impaired.

We are constantly endeavouring to improve our instruments and to adapt them to the requirements of

modern research techniques and testing methods. This involves modification to the mechanical

structure and optical design of our instruments.

Therefore, all descriptions and illustrations in this instruction manual, including all specifications are

subject to change without notice.

Infinity corrected optics

In this optical concept the light beams are parallel after leaving the objective in the direction of the

eyepieces. A second optical element, the tube lens (normally located in the eyepiece tube) is used to

converge the parallel beams, resulting in an intermediate image. The intermediate image is focussed by

the eyepieces, to provide the real image for visual observation.

The implementation of a tube lens gives the opportunity to minimize chromatic aberrations and other

“optical defects”. Further, in “Infinity Optics” the distance between the objective and tube lens is not as

strictly fixed as in the (historically older) “Finite Optics” of 160mm tube length.

This allows additional optical components to be inserted between the objective and tube head.

Fluorescence attachments, discussion bridges, eye level risers and other options can be added without

affecting the image quality.

In general “Infinity Optics” provides flexibility and the opportunity to add additional optional features.

Microscope terminology

Abbe Condenser

A two-lens sub-stage condenser located below

the stage of a microscope and functions to collect

light and direct it onto the object being examined.

Its high numerical aperture makes it particularly

suited for use with most medium- and high-

magnification objectives.

Aperture, Numerical (N.A.)

The numerical aperture is an important factor

determining the efficiency of the condenser and

objective. It is represented by the formula: (N.A. =

ηsinα), where ηis the refractive index of a

medium (air, water, immersion oil etc.) between

the objective and the specimen or condenser, and

αis half of the maximum angle at which light

enters or leaves the lens from or to a focused

object point on the optical axis.

Cover Glass Thickness

Transmitted light objectives are designed to

image specimens that are covered by a thin cover

glass (cover slip). The thickness of this small

glass piece is now standardized at 0.17 mm for

most applications.

Diaphragm, Condenser

A diaphragm, which controls the effective size of

the condenser aperture. A synonym for the

condenser illuminating aperture diaphragm.

Magnification

The number of times by which the size of the

image exceeds the original object. Lateral

magnification is usually meant. It is the ratio of the

distance between two points in the image to the

distance between the two corresponding points in

the object.

Micrometer: um

A metric unit of length measurement

= 1x10-6 meters or 0.000001 meters

Nanometer (nm)

A unit of length in the metric system equal to 10-9

meters.

Phase–contrast (microscopy)

A form of microscopy, which converts differences

in object thickness and refractive index into

differences in image amplitude and intensity.

Real Viewfield

The diameter in millimetres of the object field.

Eyepiece Field of View

Real Viewfield =

Objective Magnification

Diopter adjustment

The adjustment of the eyepiece of an instrument

to provide accommodation for the eyesight

differences of individual observers.

Depth of Focus

The axial depth of the space on both sides of the

image plane within which the image is sharp. The

larger the N.A. of objective, the shallower the

depth of focus.

Field of View (F.O.V.)

That part of the image field, which is imaged on

the observer’s retina, and hence can be viewed

at any one time. The field of view number is now

one of the standard markings of the eyepiece.

Filter

Filters are optical elements that selectively

transmit light. It may absorb part of the spectrum,

or reduce overhaul intensity or transmit only

specific wavelengths.

Immersion Oil

Any liquid occupying the space between the

object and microscope objective. Such a liquid is

usually required by objectives of 3-mm focal

length or less.

Resolving Power

A measure of an optical system's ability to

produce an image which separates two points or

parallel lines on the object.

Resolution

The result of displaying fine details in an image

Total Magnification

The total magnification of a microscope is the

individual magnifying power of the objective

multiplied by that of the eyepiece.

Working Distance

This is the distance between the objective front

lens and the top of the cover glass when the

specimen is in focus. In most instances, the

working distance of an objective decreases as

magnification increases.

X–axis

The axis that is usually horizontal in a two-

dimensional coordinate system. In microscopy X-

axis of the specimen stages is considered that

which runs left to right.

Y–axis

The axis that is usually vertical in a two-

dimensional coordinate system. In microscopy Y-

axis of the specimen stages is considered that

which runs front to back.

Table of contents

Section Page

1. Nomenclature 7

1.1 Application 7

1.2 Nomenclature 8

2. Setting up the instrument 10

2.1 Operating environment 10

3. Assembling the microscope 11

3.1 Verifying Input voltage 11

3.2 Illumination 11

3.3 Rackless stage 12

3.4 Specimen holder 12

3.5 Objectives 12

3.6 Condenser 13

3.7 Eyepiece tube 13

3.8 Eyepieces 14

3.9 Filters 14

3.10 Power cord 15

4. Usage of microscope components 16

4.1 Coarse and fine focusing 16

4.2 Coarse focus torque adjustment 16

4.3 Coarse Focus Quick Stop 17

4.4 Stage Upper Limit Stop adjustment 17

4.5 Using Thicker Samples 18

4.6 Beam Splitter Lever 18

4.7 Interpupillary distance adjustment 19

4.8 Diopter adjustment 19

4.9 Centering the condenser 20

4.10 Use of aperture diaphragm 21

4.11 Use of field diaphragm 21

4.12 Brightness and contrast adjustment 22

4.13.IR function 22

4.14 Auto light intensity reproduction 22

4.15 Filters cassette 23

5. Photomicrographic procedure 24

6. Using oil immersion objective 25

7. Troubleshooting table 26

8. Care and maintenance 28

8.1. Do not disassemble 28

8.2 Cleaning the Microscope 28

8.3 Disinfecting the Microscope 28

8.4 When not in use 28

8.5 Bulb Replacement 29

9. Warning labels 32

1. Nomenclature

1.1 Application

Designed for multiple disciplines from University through clinical, laboratory, and research applications,

the BA410E offers true professional quality with a full complement of accessories, making it a valued

addition for any biological application.

1.2 Nomenclature

BA410E-50W Halogen (Binocular)

Tabla de contenidos

Otros manuales de Microscopio de Motic

Motic

Motic MOTICAM T2 Manual de usuario

Motic

Motic ST-30 Series Manual de usuario

Motic

Motic 18 LED Series Manual de usuario

Motic

Motic BA210 series Manual de usuario

Motic

Motic BA310 Pol Manual de usuario

Motic

Motic BA310Met Manual de usuario

Motic

Motic SILVER250 Series Manual de usuario

Motic

Motic PM Series Manual de usuario

Motic

Motic M3600 Series Manual de usuario

Motic

Motic SMZ168 Series Manual de usuario

Motic

Motic 1100401200572 Manual de usuario

Motic

Motic SMZ-161 Series Manual de usuario

Motic

Motic AE2000 BIN Manual de usuario

Motic

Motic B3 Series Manual de usuario

Motic

Motic SFC-11 Series Manual de usuario

Motic

Motic SMZ168 Series Manual de usuario

Motic

Motic SMZ168 Series Manual de usuario

Motic

Motic BA80 Series Manual de usuario

Motic

Motic RED30 Series Manual de usuario

Motic

Motic BA210E Manual de usuario

Motic

Motic SWIFTLINE SM100 Series Manual de usuario

Motic

Motic B1 Series Manual de usuario

Motic

Motic SMZ-171 Series Manual de usuario

Motic

Motic SMZ-171 BL Manual de usuario

Manuales populares de Microscopio de otras marcas

Thermo Scientific

Thermo Scientific Nicolet iN10 Guía

National

National DC3-163 Manual de usuario

KERN Optics

KERN Optics OPE-1 Manual de usuario

OPTIKA MICROSCOPES

OPTIKA MICROSCOPES B-150D Manual de usuario

Prior

Prior Lux POL Manual de usuario

Opitec

Opitec Smartscoop 115615 Manual de usuario

KERN

KERN OPO-1 Manual de usuario

Topcon

Topcon SP-1P Manual de usuario

Leica

Leica DVM5000 Guía del usuario

MshOt

MshOt MZ62 Manual de usuario

KERN Optics

KERN Optics OZR-5 Manual de usuario

VWR

VWR VisiScope 384 Series Manual de usuario

Nikon

Nikon ECLIPSE E200 POL Manual de usuario

Leica

Leica DI C800 Manual

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Manual de usuario

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Manual de usuario

Olympus

Olympus SZ61 Manual de usuario

Leica

Leica FL560 Manual de usuario