Morphy Richards Precise Steam Iron Manual de usuario

www.morphyrichards.com

Precise Steam Iron steam/spray shot

Please read and keep these instructions

GGeettttiinnggtthheebbeessttffrroommyyoouurrnneewwiirroonn........

Safety first

Caution must be used when handling this appliance as it

does get very hot. Always switch off the unit and allow to

cool before cleaning or storing.

Self cleaning button

Your iron will give the best ironing results and will last longer

if you use the self clean feature at least once a month.

RN40725 Rev 3

For replacement parts, help with using your Morphy Richards,

problems and lots more, contact us by phone or through our website.

UK Helpline: 0870 060 2615

Replacement parts: 0870 167 6646

Ireland 1800 409119

40725 rev3 14/8/06 14:02 Page 1

IMPORTANT

SAFETY

INSTRUCTIONS

The use of any electrical

appliance requires the

following common sense

safety rules.

Primarily there is danger of

injury or death and

secondly the danger of

damage to the appliance.

These are indicated in the

text by the following two

conventions:

WARNING: Danger to

the person

IMPORTANT: Damage to

the appliance! In addition

we offer the following

safety advice.

Location

• Do not use outdoors.

Mains lead

• Do not allow the mains

lead to become strained or

run this appliance over it.

• If the electrical cable

becomes damaged the

cable assembly must be

replaced. Do not attempt

this task yourself, contact

the helpline number that is

found at the bottom of the

page.

Personal safety

••WARNING: Burns can

occur from touching

hot metal parts, hot

water or steam. Use

caution when you turn

a steam iron upside

down, there may be

hot water in the water

tank.

• WARNING: To protect

against the risk of

electric shock do not

put the appliance in

water or in any other

liquid.

• Do not use the vertical

steam feature on clothes

that are being worn.

• Do not leave the iron

unattended whilst plugged

in or on an ironing board.

Never allow the mains lead

to over hang the work

surface.

• The socket should always

be off before plugging or

unplugging from the

socket. Never yank the

cord to disconnect from

the socket, instead, grasp

plug and pull to

disconnect.

• Do not allow the cord to

touch hot surfaces. Let the

iron cool completely before

putting away. Loop cord

loosely around the iron

before storing.

• The iron must be used and

rested on a stable surface

• When placing the iron on

its heel, ensure that the

surface on which the iron is

placed is stable.

• The iron is not to be used if

it has been dropped, if

there are visible signs of

damage or if it is leaking.

Other safety

considerations

• Use the iron only for its

intended use.

• Always disconnect the iron

from the electrical socket

when filling with water or

emptying, and when not in

use.

• Do not operate the iron

with a damaged cord or if

the iron has been dropped

or damaged. To avoid the

risk of electric shock, do

not disassemble the iron,

but telephone Morphy

Richards for advice.

Incorrect reassembly can

cause a risk of electric

shock when the iron is

used.

Children

• Close supervision is

necessary when any

appliance is used near

children.

Special

instructions

• If your iron does not work,

check the following points:

Has the temperature

control been set to the

required temperature? Is

the plug in its socket? Is

the plug itself or the socket

faulty? (Check by plugging

in another appliance).

•W

WARNING: When not in

use, your iron should

never be placed flat

and left on an ironing

board.

• To prevent damage to the

textile being ironed, follow

the temperature guide

carefully. (Test the inside of

the hem of the garment).

• When ironing is complete,

turn off the steam selector

switch, remove the plug

from the socket, empty any

remaining water from the

tank, and allow to cool

before storage.

• If you drop or severely

knock your iron this could

cause internal damage

even if the outside appears

alright. Have it checked by

a qualified electrician.

• It is recommended that you

use up one beaker of water

by operating your iron’s

steam and shot of steam

functions before ironing any

clothes as some dripping

may occur while your irons

steam system is activated.

UUK Helpline 0870 060 2615 Replacement Parts 0870 167 6646 Ireland Helpline 1800

409119

40725 rev3 14/8/06 14:02 Page 2

Electrical

requirements

Check that the voltage on the

rating plate of your appliance

corresponds with your house

electricity supply which must be

A.C. (Alternating current).

If the socket outlets in your

home are not suitable for the

plug supplied with this appliance

the plug should be removed and

the appropriate one fitted.

WARNING: The plug

removed from the mains

lead, if severed, must be

destroyed as a plug with a

bared flexible cord is

hazardous if engaged into

a live socket outlet.

Should the fuse in the 13 amp

plug require changing a 13 amp

BS1362 fuse must be fitted.

WWARNING: This appliance

must be earthed

www.morphyrichards.com

Heat setting markings on the adjustable control dial of all Morphy Richards irons match those of

the International Textile Care Labelling Code.

Symbol

(120°C Max) Cool (160°C Max) Warm (210°C Max) Hot

Control knob

positions

Do not iron

at all

Fabric Nylon, Acetates

e.g. Acrilan

Courtelle, Orlon

Triacetates, e.g.

Tricel/Polyester

Wool, Polyester

mixtures e.g.

Polyester/Cotton

Cotton, Linen

Rayon, Rayon

mixtures,

e.g. Rayon/Linen

Ironing Iron on wrong side

if moisture required

use damp cloth

(Not Acetate)

Fabrics requiring this

setting usually require

steam pressing for heavy

cotton, denim etc.

With water in tank Dry and spray Steam/spray/

shot of steam

Without water in tank Dry ironing

‘Max setting’

Self clean

INSTRUCTIONS FOR USE

Temperature guide

40725 rev3 14/8/06 14:03 Page 3

4UK Helpline 0870 060 2615 Replacement Parts 0870 167 6646 Ireland Helpline 1800

409119

COMPONENTS OF

YOUR IRON

⁄⁄Steam to dry iron selector

switch

¤¤Temperature control dial

‹‹Steam level indicator window

››Spray button

ﬁﬁShot of steam button

ﬂﬂTemperature indicator light

‡‡Water tank (illuminated certain

models)

··Soleplate

‚‚Self-clean button

„„Spray nozzle

‰‰Filling hole with cap

ÂÂFiller cup (300ml)

ÊÊAuto shut-off feature (certain

models only)

BEFORE USE

Sort out the items to be ironed

according to the type of fabric.

This will minimise the frequency

of temperature adjustment for

different garments.

Note: The steam facility should

only be used on garments which

are suitable for ironing at the 2

and 3 dot settings.

Textiles and clothes are

supposed to carry ironing

instructions. If they don’t you

should follow the fabric guide on

page 3, but be sure to test the

temperature by ironing the hem

of the garment or similar area

first.

If you turn the control dial down

from a hot setting to a cooler

setting, wait until the iron

temperature has stabilised

before you continue ironing.

Delicate fabrics such as silk,

wool,velour, etc, are best ironed

with an ironing cloth to prevent

shine marks.

ﬂ

‡

‚

„

‰

400

350

300

⁄

¤‹›ﬁ

40725 rev3 14/8/06 14:03 Page 4

www.morphyrichards.com

FILLING AA

11Make sure that the iron is not

plugged in, then set the steam

to dry iron selector switch ⁄⁄to

the position before filling the iron

with water.

2Lift up the filler cap and fill the

tank ‡‡with water through the

filling hole ‰‰, using the beaker

provided (300ml). AAÂÂAfter

filling replace the filler cap. In

hard water areas the use of

distilled or demineralised water

is recommended.

WWARNING: Never use

battery topping up fluid or

water containing any

substances like starch, or

sugar, or defrosted water

from a refrigerator.

3Always pour out the remaining

water after use.

WWARNING: When filling

your iron with tap water

always use the beaker

provided. Never fill directly

under the tap.

TEMPERATURE

CONTROL BB

Plug in the iron and switch on.

Set the temperature control dial

¤¤to the temperature required,

but don’t start ironing

immediately.

If you wait a few minutes, the

iron will stabilise at the required

setting.Your Morphy Richards

iron is fitted with an indicator

light ﬂﬂwhich will go on and off

while you are ironing.

This is perfectly normal as it

shows that the iron is

maintaining the heat setting you

have chosen.

It is always a good idea to begin

with cool fabrics and work up to

higher settings.

An iron heats up quicker than it

cools down so you’ll save time

and electricity.

FEATURES OF YOUR

IRON

Temperature indicator

light

The indicator light ﬂﬂshows that

the iron is warming up. When

the required temperature is

reached the light will go out and

will cycle on-off during

operation.

Dry ironing

You can use your iron as a dry

iron only. Make sure the steam

to dry iron selector switch ⁄⁄is

set to the symbol.

Any temperature setting may be

used depending on the

garment. The spray feature may

be used provided there is water

in the tank (see filling section).

You do not need to put any

water in the tank when dry

ironing only.

Spray CC

Press the spray button ››and

aim the spray of water at

stubborn creases. You can do

this whilst dry ironing providing

there is water in the tank. When

using the water spray it may be

necessary to push the button a

few times to get the spray pump

primed.

Automatic variable

steam BB

Fill the iron with water as

described in the filling section,

and insert the plug into the

electrical socket.

1Set the ‘steam to dry iron’

selector switch to steam ⁄⁄.

22Select the temperature required

by turning the temperature

control dial ¤¤to the desired

setting. The amount of steam

required is automatically

selected and is displayed in

window ‹‹.

Press the shot of steam button

ﬁﬁto obtain a burst of extra

steam for ironing out creases in

40725 rev3 14/8/06 14:03 Page 5

6UK Helpline 0870 060 2615 Replacement Parts 0870 167 6646 Ireland Helpline 1800

409119

heavy material such as denim

etc.

The shot of steam can be used

whilst dry ironing, providing

there is water in the tank, and

the temperature control is set

within the steam range.

Do not use shot of steam at

temperatures below the steam

range (2-DOT) shown on the

control dial.

Note: For optimum steam

quality, do not operate the shot

more than three times in

succession.

Vertical steam

Hold the iron in a vertical

position between 1cm and 2cm

away from the item EE. Press

the shot of steam button ﬁﬁ,

this will create vertical steam.

This feature is especially useful

for removing creases from

hanging clothes, curtains, wall

hanging, etc.

Note; For optimum steam

quality, do not operate the shot

more than three times in

succession.

No drip system

Your iron is fitted with a no drip

system which is designed to

prevent water escaping from the

soleplate when the iron is too

cold.

During use, the no drip system

may emit a loud click,

particularly during heat-up or

whilst cooling down. This is

perfectly normal and indicates

that the system is functioning

correctly.

Auto shut-off

(certain models only)

If your iron is fitted with the auto

shut-off function it will

automatically shut down after a

set period.

If the iron is left unattended in

the horizontal position it will

shut down after 1 minute. When

this occurs, the indicator light

will flash and a beep will be

heard.

If it is left in the vertical position

it will shut down after 8 minutes.

To reactivate the iron gently

shake it, the temperature

indicator light will come on

indicating the iron is warming

up and wait for the iron to heat-

up as normal.

LIFE LONG ANTI-

SCALE SYSTEM

(certain models only)

The life long anti-scale system

reduces scale deposits and

helps prolong the life of the iron.

EMPTYING AND

STORING

When you have finished ironing,

unplug your iron. Ensure that

the steam to dry iron selector

switch ⁄⁄is set at the

position, lift up the fill cap and

empty any remaining water out

of the filling hole FF..

Do not store in the box, but in

an upright position, so that any

drops of water remaining

cannot leak out and discolour

the soleplate GG..

Important: The flex can be

damaged if wound too tightly

around the iron after use. Make

a loose loop with the flex and

wrap it around the iron. The iron

must be cool before winding the

flex and storing on its heel.

MAINTENANCE

Self clean feature

11Half fill the iron with water.

22Place the iron on its heel.

33Connect to a mains supply

outlet

44Turn the temperature dial to

‘MAX’ setting

55The pilot light will glow

indicating the irons switched on.

40725 rev3 14/8/06 14:03 Page 6

www.morphyrichards.com

6The pilot light will go off when

the required temperature is

reached.

7Wait for one more cycle; (pilot

light glows and goes off.)

88Turn the temperature dial in anti-

clockwise direction to ‘Min’

9Disconnect the iron from mains

supply outlet.

110Hold the iron horizontally over a

sink.

111Press and hold down the Self-

Cleaning button.

12Steam and boiling hot water will

drain from the holes in the the

soleplate washing away the

scale and minerals that have

built up inside the Steam

Chamber.

113Gently move the iron back and

forth until the water tank is

empty.

114When Self-Cleaning is complete,

release the Self-Cleaning button.

115Rest your steam iron back on its

heel and allow to fully cool

down.

116Wipe the soleplate with a cold

damp cloth.

WWARNING: Keep hands and

body away from the hot

water.

WARNING: Do not attempt

to descale the soleplate

with descaling products.

To clean a stainless

steel soleplate

To keep the soleplate of your

iron clean and free of limescale,

we recommend that you use

one of the gentle chrome, silver

or stainless steel cleaners that

are generally available. Always

follow the manufacturers

instructions. To clean off melted

man-made fibres set the iron at

3 dot position and pass it over a

clean piece of cotton which will

draw the deposit off the surface.

To clean a coated

soleplate

(certain models only)

In the unlikely event of any man-

made fibre fusing to the

soleplate, set the iron at the 3

dot position and pass it over a

clean piece of cotton which will

draw the deposit off the surface.

Do not use scouring powder or

solution as this could cause

damage to the coating.

To clean the exterior

Allow the iron to cool and wipe

over with a damp cloth and mild

detergent, then wipe with a dry

cloth.

HELPLINE

If you have any difficulty with

your appliance, do not hesitate

to call us.

We are more likely to be able to

help than the store from where

you bought it.

Please have the following

information ready to enable our

staff to deal with your query

quickly.

• Name of the product

• Model number as shown on the

underside of the appliance.

• Serial number as shown on

underside of the appliance.

UUKK

HHeellpplliinnee0088770000660022661155

RReeppllaacceemmeennttPPaarrttss0088770011667766664466

IIrreellaannddHHeellpplliinnee11880000440099111199

40725 rev3 14/8/06 14:03 Page 7

www.morphyrichards.com

Morphy Richards products are intended for household use only.

Morphy Richards has a policy of continuous improvement in product quality and

design. The company, therefore reserves the right to change the specification of its

models at any time.

TThe After Sales Division

Morphy Richards Ltd

Mexborough, South Yorkshire,

England, S64 8AJ

Helpline (office hours)

UK 0870 060 2615

Republic of Ireland 1800 409119

RN40725 Rev 3 07/06

For details of other products in the Morphy Richards range please see our website . . .

YOUR TWO YEAR

GUARANTEE

It is important to retain the

retailers receipt as proof of

purchase. Staple your

receipt to this back cover

for future reference.

Please quote the following

information if the product

develops a fault. These

numbers can be found on

the base of the product.

Model no.

Serial no.

All Morphy Richards

products are individually

tested before leaving the

factory. In the unlikely event

of any appliance proving to

be faulty within 28 days of

purchase it should be

returned to the place of

purchase for it to be

replaced.

If the fault develops after 28

days and within 24 months

of original purchase, you

should contact the Helpline

number quoting Model

number and Serial number

on the product, or write to

Morphy Richards at the

address shown. You may be

asked to return a copy of

proof of purchase.

Subject to the exclusions

set out below (see

Exclusions) the faulty

appliance will then be

repaired or replaced and

dispatched usually within 7

working days of receipt.

If for any reason this item is

replaced during the 2 year

guarantee period, the

guarantee on the new item

will be calculated from

original purchase date.

Therefore it is vital to retain

your original till receipt or

invoice to indicate the date

of initial purchase.

To qualify for the 2 year

guarantee the appliance

must have been used

according to the

manufacturers instructions.

For example kettles should

have been regularly

descaled.

EXCLUSIONS

Morphy Richards shall not

be liable to replace or

repair the goods under the

terms of the guarantee

where:

11The fault has been caused

or is attributable to

accidental use, misuse,

negligent use or used

contrary to the

manufacturers

recommendations or where

the fault has been caused

by power surges or

damage caused in transit.

22The appliance has been

used on a voltage supply

other than that stamped on

the products.

33Repairs have been

attempted by persons other

than our service staff (or

authorised dealer).

4Where the appliance has

been used for hire

purposes or non domestic

use.

5Morphy Richards are not

liable to carry out any type

of servicing work, under the

guarantee.

66Plastic filters for all Morphy

Richards kettles and coffee

makers are not covered by

the guarantee.

This guarantee does not

confer any rights other than

those expressly set out

above and does not cover

any claims for

consequential loss or

damage. This guarantee is

offered as an additional

benefit and does not affect

your statutory rights as a

consumer.

• This guarantee is valid in

the UK and Ireland only.

For electrical products sold within the

European Community. At the end of the

electrical products useful life it should

not be disposed of with household

waste.

Please recycle where facilities exist.

Check with your Local Authority or

retailer for recycling advice in your

country.

wwww.morphyrichards.com

40725 rev3 14/8/06 14:03 Page 8

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Hierro de Morphy Richards

Morphy Richards

Morphy Richards SPEED STEAMPRO Manual de usuario

Morphy Richards

Morphy Richards Comfigrip 40704 Manual de usuario

Morphy Richards

Morphy Richards IB40621 Manual de usuario

Morphy Richards

Morphy Richards ELITE 42288 Manual de usuario

Morphy Richards

Morphy Richards breeze Manual de usuario

Morphy Richards

Morphy Richards breeze Manual de usuario

Morphy Richards

Morphy Richards Turbosteam Manual de usuario

Morphy Richards

Morphy Richards ADVANCED FINISH SEMI ELECTRONIC IRON Manual de usuario

Morphy Richards

Morphy Richards 303100 Manual de usuario

Morphy Richards

Morphy Richards RN303100MUK Manual de usuario

Morphy Richards

Morphy Richards breeze Manual de usuario

Morphy Richards

Morphy Richards Turbosteam Manual de usuario

Morphy Richards

Morphy Richards IB40460 Manual de usuario

Morphy Richards

Morphy Richards Steam Generator Manual

Morphy Richards

Morphy Richards Cruiser Manual de usuario

Morphy Richards

Morphy Richards breeze Manual de usuario

Morphy Richards

Morphy Richards Steam Generator ironing system Manual de usuario

Morphy Richards

Morphy Richards INTELLIDOME Manual de usuario

Morphy Richards

Morphy Richards IB40620 Manual de usuario

Morphy Richards

Morphy Richards ELITE PRO Manual de usuario

Morphy Richards

Morphy Richards Power Steam Manual de usuario

Morphy Richards

Morphy Richards Atomist Manual de usuario

Morphy Richards

Morphy Richards Turbosteam Manual de usuario

Morphy Richards

Morphy Richards RN40635 Manual de usuario

Manuales populares de Hierro de otras marcas

Clatronic

Clatronic DB 3703 Manual de usuario

TEFAL

TEFAL FV4093Z0 Manual de usuario

Gorenje

Gorenje SIH 2200 BS Manual de usuario

Philips

Philips GC6012 Manual de usuario

Bosch

Bosch 2 Series Manual de usuario

Riffel

Riffel Catena KB-819 Manual de usuario

Texi

Texi Hestia Manual de usuario

Maxwell

Maxwell MW-3010 Manual de usuario

TREVIDEA

TREVIDEA Girmi ST60 Manual de usuario

Philips

Philips HI5914/30 Manual de usuario

Primula

Primula Vapormat Manual de usuario

Magio

Magio MG-541 Manual de usuario

Scarlett

Scarlett SC-1334S Manual de usuario

Bosch

Bosch Sensixx B22L Manual de usuario

Philips

Philips GC651 Manual de usuario

Vitek

Vitek VT-1247 VT Manual de usuario

Cleanmaxx

Cleanmaxx 3397 Manual de usuario

Philips

Philips GC800 Manual de usuario