Morphy Richards ELITE 42288 Manual de usuario

JJeettSSttrreeaamm‘‘EElliittee’’aanndd‘‘EElliittee

’’ironing system

Please read and keep these instructions

GGeettttiinnggtthheebbeessttffrroommyyoouurrnneewwiirroonniinnggssyysstteemm........

Safety first

Caution must be used when handling this appliance

as it does get very hot. Always switch off the unit and

allow to cool before cleaning or storing.

Water tank

The water tank can be re-filled at any time during ironing.

Performance

To extend the performance and life of your jet stream

generator ensure that you replace the anti-scale cartridge regularly.

RN42288 Rev 1

For replacement parts, help with using your Morphy Richards product,

problems and lots more; contact us by phone or through our website.

UK Helpline: 0870 060 2615

Replacement parts: 0870 167 6646

Ireland 1800 409119

42288 rev1 30/11/06 14:34 Page 2

IMPORTANT

SAFETY

INSTRUCTIONS

The use of any electrical

appliance requires, the use

of common sense and

strict following of safety

rules.

Primarily there is danger of

injury or death and

secondly the danger of

damage to the appliance.

These are indicated in the

text by the following two

conventions:

WARNING: Danger to

the person!

IMPORTANT: Damage to

the appliance! In addition

we offer the following

safety advice.

Location

• Do not use outdoors.

Children

• Close supervision is

necessary when any

appliance is used near

children.

Personal safety

• Burns can occur from

touching hot metal parts,

hot water or steam. Use

caution when using your

steam generator. If your

iron is placed for a few

moments on the iron rest

plate, this plate may reach

very high temperatures. In

this instance, do not touch

the iron soleplate or the

iron rest plate until the iron

and the iron rest have

cooled down.

• Do not use the vertical

steam feature on clothes

that are being worn.

• Do not leave the steam

generator unattended

whilst plugged in or on an

ironing board. Never allow

the mains lead to over

hang the work surface.

• The mains socket should

always be switched off

before plugging or

unplugging from the

socket. Never yank the

cord to disconnect from

the socket, instead, grasp

the plug and pull to

disconnect.

Other safety

considerations

• Use the steam generator

only for its intended use.

• Never hold the generator

base set under the tap.

• To protect against the risk

of electric shock do not put

the appliance in water or in

any other liquid.

• Always disconnect the tank

from the base unit when

filling with water and

emptying.

• Always disconnect the

steam generator from the

electrical supply when

cleaning or when not in

use.

• Do not operate the steam

generator with a damaged

cord or if the iron has been

dropped or damaged. To

avoid the risk of electric

shock, do not disassemble

the iron, but telephone

Morphy Richards for

advice. Incorrect

reassembly can cause a

risk of electric shock when

the iron is used.

• If the need arises to

change the mains cable on

your steam generator or

the iron, please return to

Morphy Richards service

department at the address

on the back page.

Special

instructions

• If your steam generator

does not work, check the

following points:

Has the iron temperature

control been set to the

required temperature? Is

the plug in its socket? Is

the plug itself or the socket

faulty? (Check by plugging

in another appliance).

• To prevent damage to the

textile being ironed, follow

the temperature guide

carefully. (Test on the inside

of the hem of the garment).

• When ironing is complete,

remove the plug from the

socket, empty any

remaining water from the

tank, and allow to cool

before storage.

• If you drop or severely

knock your steam

generator this could cause

internal damage even if the

outside appears alright.

Have it checked by a

qualified electrician.

• The temperature of

accessible surfaces may

be high when the appliance

is operating.

WWAARRNNIINNGG::DDoonnoottuussee

tthheepprroodduuccttoonnaa

ssuurrffaacceewwhhiicchhccoouullddbbee

ddaammaaggeeddbbyyhheeaattoorr

sstteeaammssuuc

chhaassaa

wwoorrkkttooppoorraappoolliisshh

wwooooddSSuurrffaaccee..

IIffiinnddoouubbtt,,ccoonnttaacctt

MMoorrpphhyyRRiicchhaarrddss..

UUKKHHeellpplliinnee0088770000660022661155RReeppllaacceemmeennttPPaarrttss0088770011667766664466IIrreellaannddHHeellpplliinnee11880000440099111199

42288 rev1 30/11/06 14:34 Page 3

Symbol

(120°C Max) Cool (160°C Max) Warm (210°C Max) Hot

Control knob

positions

Do not iron

at all

Fabric Nylon, Acetates

e.g. Acrilan

Courtelle, Orlon

Triacetates, e.g.

Tricel/Polyester

Wool, Polyester

mixtures e.g.

Polyester/Cotton

Cotton, Linen

Rayon, Rayon

mixtures,

e.g. Rayon/Linen

Ironing Iron on wrong side

if moisture required

use damp cloth

(Not Acetate)

Fabrics requiring this

setting usually require

steam pressing for heavy

cotton, denim etc.

Steaming

Dry

‘Max setting’

INSTRUCTIONS FOR USE

Temperature guide

ELECTRICAL

REQUIREMENTS

Check that the voltage on the

rating plate of your appliance

corresponds with your house

electricity supply which must be

A.C. (Alternating current).

If the socket outlets in your

home are not suitable for the

plug supplied with this

appliance the plug should be

removed and the appropriate

one fitted.

WARNING: The plug

removed from the mains

lead, if severed, must be

destroyed as a plug with a

bared flexible cord is

hazardous if engaged into

a live socket outlet.

Should the fuse in the 13 amp

plug require changing a 13 amp

BS1362 fuse must be fitted.

WARNING: This appliance

must be earthed

42288 rev1 30/11/06 14:34 Page 4

55UUKKHHeellpplliinnee0088770000660022661155RReeppllaacceemmeennttPPaarrttss0088770011667766664466IIrreellaannddHHeellpplliinnee11880000440099111199

COMPONENTS OF

YOUR JETSTREAM

‘ELITE

’

Iron unit

⁄⁄Steam trigger

¤¤Temperature indicator light

‹‹Soleplate

››Temperature control knob

ﬁﬁSupply cord from base unit

Base unit

ﬂﬂSupply cord

‡‡Mains cable

··Water tank

‚‚Water tank filler

„„Tank release knob

‰‰Mains cable clip (storage)

ÂÂReplace anti-scale cartridge

indicator

ÊÊ‘Fill’ water tank indicator

ÁÁON/OFF, button plus steam

ready and auto-shut off indicator

ËËAnti-scale cartridge (behind

water tank)

ÈÈSupply cord storage clip

ÍÍSteam level indicator lights

ÎÎSteam level selection button

ÏÏMains cable storage

Water spray unit

ÌÌSpray assembly

ÓÓSpray button

ÔÔSpray cover release button

Spray bottle (internal)

CALC

‡

‚

„

‰

‹



ﬂﬂ

ÁÁ

ÈÈ

ÍÍÎÎ

›

⁄ﬁ

42288 rev1 30/11/06 14:34 Page 5

⁄¤

›

ﬁ

CALC

COMPONENTS OF

YOUR JETSTREAM

‘ELITE’

Iron unit

⁄⁄Steam trigger

¤¤Temperature indicator light

‹‹Soleplate

››Temperature control knob

ﬁﬁSupply cord from base unit

Base unit

ﬂﬂSupply cord

‡‡Mains cable

··Water tank

‚‚Water tank filler

„„Tank release knob

‰‰Mains cable clip (storage)

ÂÂReplace anti-scale cartridge

indicator

ÊÊ‘Fill’ water tank indicator

ÁÁON/OFF, button plus steam

ready

ËËAnti-scale cartridge (behind

water tank)

Location

Locate the steam generator

horizontally on the rest plate of

your ironing board (if large

enough) or on a heat resistant

stand at the same height of your

ironing board or below it. Always

ensure the generator is on a firm

surface when ironing.

WWAARRNNIINNGG::DDoonnoottuusseetthhee

pprroodduuccttoonnaassuurrffaacceewwhhiicchh

ccoouullddbbeeddaammaaggeeddbbyyhheeaatt

oorrsstteeaammssuucchhaassaawwoorrkkttoopp

oorraappoolliisshhwwooooddSSuurrffaaccee..

IIffiinnddoouubbtt,,ccoonnttaaccttMMoorrpphhyy

RRiicchhaarrddss..

‚

„

ﬂﬂ

‡

‰

‹

42288 rev1 30/11/06 14:34 Page 6

Before use

Remove any protective sticker

from the soleplate and the base

unit, if any.

Unwind and straighten the

power cord ‡‡and supply cord

ﬂﬂ.

Slide out the water tank and fill

(see filling instructions).

When ironing with the temp set

at 2 dot setting, the steam

output should be set at the

lower end of the steam range.

Textiles and clothes are

supposed to carry ironing

instructions. If they don’t you

should follow the fabric guide on

page 3, but be sure to test the

temperature by ironing the hem

of the garment or similar area

first.

If you turn the control dial down

from a hot setting to a cooler

setting, wait until the iron

temperature has stabilised

before you continue ironing.

FILLING

1Place the steam generator on a

stable ironing board or table,

with the iron resting on its stand.

2Release the detachable water

tank by operating the tank

release knob „„.

3Slide the tank outwards.

4Fill the tank to the ‘fill to here’

line with clean tap water AA.

Never use battery topping

up fluid or water

containing any substances

like starch or sugar, or

defrosted water from a

refrigerator.

5Re position the water tank on

the base unit and push securely

into place. Please make sure the

tank is secure BB..

6Always pour out any remaining

water after use.

Re-filling ‘in use’

1The low water indicator light ÊÊ

will flash and a beep sound will

be heard. This is a warning to

stop ironing and fill the tank.

Ironing can continue for a short

period then the generator will

shut down until the tank is

refilled.

2Refilling can be done whilst the

appliance is in operation. It is

not necessary to wait for the

appliance to cool down.

3Unlock the tank using knob „„

Slide out the water tank and fill

(see filling instructions).

4 Alternatively you can re-fill the

tank in ‘situ’ through the filler

‚‚.

Steam ironing

1Connect the appliance to a

suitable mains outlet. Press the

power ‘ON’ button ÁÁwhich will

glow red.

ALL MODELS

After a few minutes the light

changes to green indicating the

boiler is ready to generate

steam.

Check the iron temperature

indicator light ¤¤has switched

off indicating the iron is ready to

use.

MODEL WITH VARIABLE

STEAM 42288

This model automatically selects

the middle steam setting as the

default setting.

To select a different steam

setting, press the steam button

ÎÎto select the desired steam

level.

2Turn the temperature dial on the

iron in a clockwise direction,

select dot-1, dot-2 or dot-3

according to the

recommendation of the garment

label.

3The iron’s temperature indicator

light ¤¤goes off when the

required temperature is reached.

77UUKKHHeellpplliinnee0088770000660022661155RReeppllaacceemmeennttPPaarrttss0088770011667766664466IIrreellaannddHHeellpplliinnee11880000440099111199

42288 rev1 30/11/06 14:34 Page 7

8888

4Depress the steam button ⁄⁄for

1 minute to clear the system of

air (first time use only) which will

be accompanied by a clicking

noise which is quite normal.

5Begin first time ironing with an

old towel. Note: If you press the

steam button before the steam

generator reaches its required

temperature a warning double

bleep will sound.

6The appliance is ready to use.

7Press the steam button ⁄⁄for

steam ironing.

8Depress the power switch to

turn off the base unit when

ironing is complete.

Dry ironing

1Connect the appliance to a

suitable mains outlet.

242288 Only. Press the steam

switch ÎÎ2 times until all three

steam level indicator lights go

off (steam off mode).

3Turn the temperature dial on the

iron in a clockwise direction,

select dot-1, dot-2, or dot-3

according to the

recommendation of the garment

label.

4The temperature indicator light

glows on the iron indicating that

it is switched on.

5When the required temperature

is reached, the temperature

indicator light on the iron goes

off. The iron is ready to use.

It is always a good idea to begin

with ‘cool’ fabrics and work up

to higher settings.

An iron heats up quicker than it

cools down so you’ll save time

and electricity.

Auto-shut off. (42288

only)

An auto-shut off system will

activate if the steam is not used

for over 15 minutes. The mains

indicator light ÁÁwill flash

between green and red

indicating the unit is in ‘sleep

mode’.

When this occurs, press the

steam select button ÎÎor the

power switch ÁÁ‘ON’ once. The

appliance will switch on

immediately and you need to

check, and select the required

setting.

ANTI-SCALE

SYSTEM

The anti-scale cartridge is

designed to reduce the build-up

of limescale which occurs

during steam ironing, this will

prolong the working life of your

iron. However, please note that

the anti-scale cartridge will not

completely stop the natural

process of limescale build-up.

When the cartridge needs

replacing the indicator light ÂÂ

will flash.

NOTE: The unit will not switch

off. But you need to replace the

cartridge as soon as possible.

Replacing anti-scale

medium CC

1When the indicator light flashes

you need to replace the anti-

scale cartridge.

2The steam generator needs to

be connected to the mains

supply.

3Remove the tank from the base

unit.

4Remove the anti-scale cartridge

which is situated behind the

tank, and replace the cartridge

making sure the replacement

unit is pushed firmly in position.

5Re-position the tank.

6If the cartridge is not fitted

correctly the unit will not

Cartridge

Drawer

42288 rev1 30/11/06 14:34 Page 8

function. The ‘calc’ light will flash

accompanied by a beep sound.

Re-fit the cartridge and the unit

will operate as intended.

Note: A cartridge should filter 40

litres of hard water.

Replacement anti-

scale refills

To obtain replacement anti-scale

refills telephone our spares

number

on: 0870 167 6646.

1If a new re-fill is not available

you may continue operating the

appliance but scale will build up

in the system. Replace the anti-

scale refill as soon as possible.

Part Number 01030

Features of your

steam generator

Steam function

During the steaming process,

small amounts of water may be

ejected from the soleplate. This

is normal and can be avoided by

using the steam for short

amounts of time and only when

the iron is at the correct

temperature (the indicator light

on the iron goes out when

ready).

Sudden jolts of the boiler unit

can also cause water droplets

on the soleplate; therefore do

not move the base unit during

ironing. We recommend for the

first time ironing that you iron

over an old towel.

Vertical steam

Hold the iron in a vertical

position between 1cm and 2cm

away from the item DD. Press

the steam trigger ⁄⁄, this will

create vertical steam. This

feature is especially useful for

removing creases from hanging

clothes, curtains, wall hanging.

MAINTENANCE

To clean a stainless steel

soleplate

To keep the soleplate of your

iron clean and free of limescale,

we recommend that you use

one of the gentle chrome, silver

or stainless steel cleaners that

are generally available. Always

follow the manufacturers

instructions. To clean off melted

man-made fibres set the iron at

3 dot position and pass it over a

clean piece of cotton which will

draw the deposit off the surface.

To clean the exterior

Allow the steam generator to

cool and wipe over with a damp

cloth and mild detergent, then

wipe with a dry cloth.

HELPLINE

If you have any difficulty with

your appliance, do not hesitate

to call us.

We are more likely to be able to

help than the store from where

you bought it.

Please have the following

information ready to enable our

staff to deal with your query

quickly.

• Name of the product

• Model number as shown on the

underside of the appliance.

• Serial number as shown on

underside of the appliance.

UK Helpline 0870 0602615

Replacement Parts 0870 1676646

Ireland Helpline 1800 409119

99UUKKHHeellpplliinnee0088770000660022661144RReeppllaacceemmeennttPPaarrttss0088770011557766664455IIrreellaannddHHeellpplliinnee11880000440099111199

42288 rev1 30/11/06 14:34 Page 9

YOUR TWO YEAR

GUARANTEE

It is important to retain the

retailers receipt as proof of

purchase. Staple your receipt to

this back cover for future

reference.

Please quote the following

information if the product

develops a fault. These numbers

can be found on the base of the

product.

Model no.

Serial no.

All Morphy Richards products

are individually tested before

leaving the factory. In the

unlikely event of any appliance

proving to be faulty within 28

days of purchase it should be

returned to the place of

purchase for it to be replaced.

If the fault develops after 28

days and within 24 months of

original purchase, you should

contact the Helpline number

quoting Model number and

Serial number on the product, or

write to Morphy Richards at the

address shown. You may be

asked to return a copy of proof

of purchase.

Subject to the exclusions set out

below (see Exclusions) the faulty

appliance will then be repaired

or replaced and dispatched

usually within 7 working days of

receipt.

If for any reason this item is

replaced during the 2 year

guarantee period, the guarantee

on the new item will be

calculated from original

purchase date. Therefore it is

vital to retain your original till

receipt or invoice to indicate the

date of initial purchase.

To qualify for the 2 year

guarantee the appliance must

have been used according to the

manufacturers instructions. For

example kettles should have

been regularly descaled.

EXCLUSIONS

Morphy Richards shall not be

liable to replace or repair the

goods under the terms of the

guarantee where:

1The fault has been caused or is

attributable to accidental use,

misuse, negligent use or used

contrary to the manufacturers

recommendations or where the

fault has been caused by power

surges or damage caused in

transit.

2The appliance has been used on

a voltage supply other than that

stamped on the products.

3Repairs have been attempted by

persons other than our service

staff (or authorised dealer).

4Where the appliance has been

used for hire purposes or non

domestic use.

5Morphy Richards are not liable

to carry out any type of servicing

work, under the guarantee.

6Plastic filters for all Morphy

Richards kettles and coffee

makers are not covered by the

guarantee.

This guarantee does not confer

any rights other than those

expressly set out above and

does not cover any claims for

consequential loss or damage.

This guarantee is offered as an

additional benefit and does not

affect your statutory rights as a

consumer.

• This guarantee is valid in the UK

and Ireland only.

1100

For electrical products sold

within the European

Community. At the end of

the electrical products

useful life it should not be

disposed of with household

waste.

Please recycle where

facilities exist. Check with

your Local Authority or

retailer for recycling advice

in your country.

42288 rev1 30/11/06 14:34 Page 10

Morphy Richards products are intended for household use only.

Morphy Richards has a policy of continuous improvement in product quality and

design. The company, therefore reserves the right to change the specification of its

models at any time.

The After Sales Division

Morphy Richards Ltd

Mexborough, South Yorkshire,

England, S64 8AJ

Helpline (office hours)

UK 0870 060 2615

Republic of Ireland 1800 409119

RN42288 Rev 1 10/06

For details of other products in the Morphy Richards range please see our website . . .

42288 rev1 30/11/06 14:34 Page 1

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Hierro de Morphy Richards

Morphy Richards

Morphy Richards IB41510 Manual de usuario

Morphy Richards

Morphy Richards 40725 Manual de usuario

Morphy Richards

Morphy Richards RN42271MUK Manual de usuario

Morphy Richards

Morphy Richards RN40868 Manual de usuario

Morphy Richards

Morphy Richards TurboSteamPro Manual de usuario

Morphy Richards

Morphy Richards IB40550 Manual de usuario

Morphy Richards

Morphy Richards breeze Manual de usuario

Morphy Richards

Morphy Richards ELITE S Manual de usuario

Morphy Richards

Morphy Richards JET STREAM Manual de usuario

Morphy Richards

Morphy Richards ORBIT TRAVEL 41540 Manual de usuario

Morphy Richards

Morphy Richards IB40460 Manual de usuario

Morphy Richards

Morphy Richards SPEED STEAM Series Manual de usuario

Morphy Richards

Morphy Richards Comfigrip 40704 Manual de usuario

Morphy Richards

Morphy Richards TURBOSTEAM 40659 Manual de usuario

Morphy Richards

Morphy Richards TURBOSTEAM IRON - MANUAL 2 Manual de usuario

Morphy Richards

Morphy Richards ELITE STEAM GENERATOR - REV 1 Manual de usuario

Morphy Richards

Morphy Richards IB4050X Manual de usuario

Morphy Richards

Morphy Richards RN40635 Manual de usuario

Morphy Richards

Morphy Richards Precise Steam Iron steam/spray shot Manual de usuario

Morphy Richards

Morphy Richards VAPOCARE Manual de usuario

Morphy Richards

Morphy Richards ORBIT TRAVEL 41540 Manual de usuario

Morphy Richards

Morphy Richards POWER STEAMELITE Manual de usuario

Morphy Richards

Morphy Richards IB40621 Manual de usuario

Morphy Richards

Morphy Richards Steam Generator ironing system Manual de usuario

Manuales populares de Hierro de otras marcas

Clatronic

Clatronic DB 3703 Manual de usuario

TEFAL

TEFAL FV4093Z0 Manual de usuario

Gorenje

Gorenje SIH 2200 BS Manual de usuario

Philips

Philips GC6012 Manual de usuario

Bosch

Bosch 2 Series Manual de usuario

Riffel

Riffel Catena KB-819 Manual de usuario

Texi

Texi Hestia Manual de usuario

Maxwell

Maxwell MW-3010 Manual de usuario

TREVIDEA

TREVIDEA Girmi ST60 Manual de usuario

Philips

Philips HI5914/30 Manual de usuario

Primula

Primula Vapormat Manual de usuario

Magio

Magio MG-541 Manual de usuario

Scarlett

Scarlett SC-1334S Manual de usuario

Bosch

Bosch Sensixx B22L Manual de usuario

Philips

Philips GC651 Manual de usuario

Vitek

Vitek VT-1247 VT Manual de usuario

Cleanmaxx

Cleanmaxx 3397 Manual de usuario

Philips

Philips GC800 Manual de usuario