Moog Tritech Seanet SCU v5 Manual de usuario

Seanet SCU v5

0581-SOM-00002, Issue: 05 1 © Tritech International Ltd.

Seanet SCU v5

Product Manual

0581-SOM-00002, Issue: 05

Seanet SCU v5

0581-SOM-00002, Issue: 05 2 © Tritech International Ltd.

The copyright in this document is the property of Tritech International Ltd. The document is supplied by Tritech International Ltd on

the understanding that it may not be copied, used, or disclosed to others except as authorised in writing by Tritech International Ltd.

Tritech International Ltd reserves the right to change, modify and update designs and specifications as part of their ongoing

product development programme.

All product names are trademarks of their respective companies.

Seanet SCU v5

0581-SOM-00002, Issue: 05 3 © Tritech International Ltd.

Table of Contents

Help & Support ........................................................................................................... 4

Warning Symbols ........................................................................................................ 5

1. Introduction ............................................................................................................. 6

2. Specification ........................................................................................................... 7

2.1. Dimensions .................................................................................................. 7

2.2. Computer and Electrical ............................................................................... 8

2.3. Physical ....................................................................................................... 8

2.4. SCUv5 Front Panel ...................................................................................... 9

2.5. Seanet SCU (v5) Rear Panel Layout ............................................................. 9

2.6. Major differences between SCUv4 and SCUv5 ............................................ 10

3. Installation ............................................................................................................ 12

3.1. Connections ............................................................................................... 12

3.2. Communication Configuration ..................................................................... 13

4. Operation .............................................................................................................. 15

5. System Software Configuration .............................................................................. 16

5.1. Seanet System Re-Installation .................................................................... 16

5.2. Repair of Seanet Pro .................................................................................. 16

5.3. Full Disk Re-Installation using Boot Recovery .............................................. 17

6. Maintenance ......................................................................................................... 18

A. Data and Control Ports ......................................................................................... 19

B. SCUv5 Communications Setup .............................................................................. 24

C. ARCNET Termination ........................................................................................... 29

D. Setting the computer IP address in Windows® 7 or Windows® 10 ........................... 30

Glossary ................................................................................................................... 32

Seanet SCU v5

0581-SOM-00002, Issue: 05 4 © Tritech International Ltd.

Help & Support

First please read this manual thoroughly (particularly the Troubleshooting section, if present).

If a warranty is applicable, further details can be found in the Warranty Statement, 0080-

STF-00139, available upon request.

Tritech International Ltd can be contacted as follows:

Mail Tritech International Ltd

Peregrine Road

Westhill Business Park

Westhill, Aberdeenshire

AB32 6JL, UK

Telephone ++44(0)1224 744 111

Fax ++44(0)1224 741 771

Email [email protected]

Website www.tritech.co.uk

Prior to contacting Tritech International Ltd please ensure that the following is available:

1. The Serial Numbers of the product and any Tritech International Ltd equipment connected

directly or indirectly to it

2. Software or firmware revision numbers

3. A clear fault description

4. Details of any remedial action implemented

Contamination

If the product has been used in a contaminated or hazardous environment you

must de-contaminate the product and report any hazards prior to returning the

unit for repair. Under no circumstances should a product be returned that is

contaminated with radioactive material.

The name of the organisation which purchased the system is held on record at Tritech

International Ltd and details of new software or hardware packages will be announced at

regular intervals. This manual may not detail every aspect of operation and for the latest

revision of the manual please refer to www.tritech.co.uk

Tritech International Ltd can only undertake to provide software support of systems loaded

with the software in accordance with the instructions given in this manual. It is the customer's

responsibility to ensure the compatibility of any other package they choose to use.

Seanet SCU v5

0581-SOM-00002, Issue: 05 5 © Tritech International Ltd.

Warning Symbols

Throughout this manual the following symbols may be used where applicable to denote any

particular hazards or areas which should be given special attention:

Note

This symbol highlights anything which would be of particular interest to the reader

or provides extra information outside of the current topic.

Important

When this is shown there is potential to cause harm to the device due to

static discharge. The components should not be handled without appropriate

protection to prevent such a discharge occurring.

Caution

This highlights areas where extra care is needed to ensure that certain delicate

components are not damaged.

Warning

DANGER OF INJURY TO SELF OR OTHERS

Where this symbol is present there is a serious risk of injury or loss of life. Care

should be taken to follow the instructions correctly and also conduct a separate

Risk Assessment prior to commencing work.

Seanet SCU v5

0581-SOM-00002, Issue: 05 6 © Tritech International Ltd.

1. Introduction

The Seanet Surface Control Unit SCU (v5) incorporates the very latest in electronics and PC

technology including readers for memory cards and a built-in factory restore mode. The latest

v5 model of the SCU has again been designed with reliability and robustness in mind. The

SCU is housed in a rugged 3U rack mount chassis and incorporates a front panel Remote

Access Terminal (RAT) which enables all functions to be controlled by a combination of

pointer and function button operations.

The Seanet SCU (v5) is designed to control and display the complete range of Tritech

International Ltd sonars and subsidiary subsea sensors,

Features:

• The SCU can simultaneously run combinations of (amongst others) Imaging Sonar,

Profiling Sonar, Bathymetric & Oceanographic package and Sidescan together

• Uses a fast ARCNET communications to the subsea devices allowing a standard data rate

of 156kbps (max cable length 1200m) with options for fibre-optic interfaces and other Baud

rates available for longer cable lengths

• Simultaneous connection and operation of Gemini heads via Ethernet

• Built-in factory restore disk, for simple diskless restoration to original settings, also contains

a minimum of 32GB SSD (10GB reserved for Operating System)

• Compact Flash and SD slot in front panel

• As well as data from Tritech devices, other data including NMEA 1083, Pipetracker, Turns

Counter and Compass data may be recorded

• A range of interface ports is provided including DA-15 ARCNET, USB, DE-9 serial and

Ethernet RJ45

• Data export capability via the 5 x DE-9 connectors using RS232, RS485 or RS422

• Rack-mountable in racks of depth 330mm or greater

Note

A range of factory fit options are available on request, such as video capture

cards, please contact Tritech International Ltd for more information.

Seanet SCU v5

0581-SOM-00002, Issue: 05 7 © Tritech International Ltd.

2. Specification

2.1. Dimensions

All dimensions are in mm. Not to scale.

375.5

432.4

482.6

325.0

132.5

465.9

57.2

All dimensions are in mm. Not to scale.

Specification Seanet SCU v5

0581-SOM-00002, Issue: 05 8 © Tritech International Ltd.

2.2. Computer and Electrical

Item Details

Processor Intel™ Dual Core (or better)

Operating System Microsoft Windows® Embedded

Primary Control PS/2 Remote Access Terminal (RAT)

Video Output SVGA, XGA, SXGA, and Display Port

HDMI and DVI available via Display Port adaptors

ARCNET Link 1 x 156kbit·s-1 (1200m) or 78kbit·s-1 (2500m)

Storage Media 64GB SSD

Interface Ports 4 x 9-pin DE-9 ports (configurable RS-232, RS-485, RS-422,

ARCNET)

1 x 15-pin DA-15 port for ARCNET or RS232

1 x 24VDC at 36VA Output (for equipment test purposes)

Front and rear USB ports (3.0 or better)

Multi-card reader (CF Type 1 & SD card)

Ethernet

Input Voltage Universal 100-240VAC 50/60Hz

Note

Any connectors on the motherboard are not part of the SCU specification and

may be used as part of the normal operation of the unit but their use is not

covered by this manual.

2.3. Physical

Item Details

Weight ~10kg

Material Aluminium, Stainless Steel

Operating Temperature 5 to 35°C

Storage Temperature -20 to 50°C

Specification Seanet SCU v5

0581-SOM-00002, Issue: 05 9 © Tritech International Ltd.

2.4. SCUv5 Front Panel

1. The RAT can be de-coupled from the main unit completely or operated from an RS232

extension cable. The function of the RAT controls depend on which subsea sensors are

fitted, and the user should refer to the appropriate section of each product manual for full

details.

2. The AUX Power Switch toggles the DC Voltage Output on the rear of the SCU. This DC

voltage is accessible on the DC OUT banana plugs on the rear.

3. The memory card reader is compatible with Compact Flash I/II and SD cards. The restore

disk on earlier Seanet SCUs is no longer used as there is an in-built factory restore option

for system recovery.

4. The port activity LEDs indicate the state and configuration of the DE-9 COM ports (A - D)

accessible on the rear

2.5. Seanet SCU (v5) Rear Panel Layout

1. Power supply with DC Out ports

2. Motherboard connectors

3. Expansion slots for PCI based cards (including PCI-E)

4. (from left to right) Earth mounting point, DE-9 (top row) and DA-15 (bottom row) ports for

RS232, RS422, RS485, ARCNET and RAT, system restore button

Specification Seanet SCU v5

0581-SOM-00002, Issue: 05 10 © Tritech International Ltd.

Note

The exact rear panel layout of the SCUv5 is subject to change and may not be

identical to the layout shown above.

For detailed pin-out diagrams and wiring options for the DE-9 and DA-15 connectors refer to

Appendix A, Data and Control Ports and Appendix B, SCUv5 Communications Setup.

Note

The motherboard connectors are subject to change in line with Tritech

International Ltd policy of continual product improvement, however, this will not

affect ordinary operation of the SCU. Generally the motherboard will have USB

ports (conforming to at least the USB2.0 standard), 1 or 2 PS/2 keyboard/mouse

ports and RJ45 Ethernet.

Caution

If a DE-9 port is present on the motherboard it may only work with RS232 signals

but is not fitted with over-current protection. To avoid potential damage to the

motherboard it is recommended that this port is not used to connect sensor

equipment. Contact Tritech International Ltd with details of your SCU if more

information or assistance is required.

2.6. Major differences between SCUv4 and SCUv5

Feature SCU (v4) SCU (v5)

RAM 256Mb 512Mb (minimum)

Data Storage Zip Drive, optional HDD SSD Drive, optional HDD

(instead of SSD)

ARCNET Sonar Ports 1 x AIF card interface 2 x SCU5 Main Board Ports

Serial Sonar Ports 3 x RS232 4 x RS232/RS485 or 2 x

RS422

USB Ports 2 front, 2 rear 4 front plus rear ports

ARCNET Ports PCI AIF, Node 255 V5 Main Board, Node 252

Ethernet LAN Port Optional Normally 1, more can be

added.

Port Activity LED Display No Yes

Aux Power Supply 24V 1A, non-switchable 24V 2.4A switchable, 33V

1.8A option, LED on warning

External Storage Floppy Disk Drive, ZIP Drive Compact Flash Card, SD

Card, Memory Stick

System Recovery Device ZIP Disk – stored internal to

SCU. SCU Lid needs to be

removed to access

Internal flash memory –

switched system restore. No

internal access required.

Caution

If a DE-9 port is present on the motherboard it may only work with RS232 signals

but is not fitted with over-current protection. To avoid potential damage to the

Tabla de contenidos

Otros manuales de Unidad de control de Moog

Moog

Moog 760 Series Manual del propietario

Moog

Moog 78N Series Manual del propietario

Moog

Moog D791 series Guía de inicio rápido

Moog

Moog D941 series Guía de inicio rápido

Moog

Moog D651 series Guía de inicio rápido

Moog

Moog D765 series Guía de inicio rápido

Moog

Moog D661-***G series Guía de inicio rápido

Moog

Moog 62 Series Manual del propietario

Moog

Moog D791 series Manual de usuario

Moog

Moog D816 Series Manual de usuario

Moog

Moog ACV Series Manual de usuario

Moog

Moog X77XK Series Manual del propietario

Moog

Moog D631 Series Guía de inicio rápido

Moog

Moog D636 Series Guía de inicio rápido

Moog

Moog G761 Series Manual del propietario

Moog

Moog 631 Series Manual del propietario

Moog

Moog D661 series Manual del propietario

Moog

Moog D765/9 Series Manual de usuario

Moog

Moog D659 Series Manual de usuario

Moog

Moog D816 Series Guía de inicio rápido

Moog

Moog D668 Series Manual de usuario

Moog

Moog 641 Series Manual del propietario

Moog

Moog D926/7 Series Manual de usuario

Moog

Moog 72 Series Manual del propietario

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario