Monoprice 33822 Manual de usuario
32" QHD 1440p VA Frameless Aluminum
Desktop Monitor Adaptive Sync 144hz with
Height Adjustable Stand
P/N 33822
User's Manual
SAFETY WARNINGS AND GUIDELINES
Please read this entire manual before using this device, paying extra attention to these
safety warnings and guidelines. Please keep this manual in a safe place for future reference.
-This monitor is intended for indoor use only.
-Do not expose this monitor to water or moisture of any kind. Do not place drinks or
other containers with moisture on or near the device. If moisture does get in or on
the device, immediately unplug it from the power outlet and allow it to fully dry
before reapplying power.
-Do not touch the monitor, the power cord, or any other connected cables with wet
hands.
-Do not place the monitor on an unstable surface where it could fall and cause either
personal injury or damage to the monitor and/or other equipment.
-Do not subject the monitor to extreme force, shock, or fluctuations in temperature
or humidity.
-Do not block the ventilation holes in the monitor's casing. Do not place the monitor
in a confined space with inadequate ventilation. Periodically check the ventilation
holes to ensure they do not become clogged with dust, debris, or nearby items.
-Do not place the monitor near a heat source, such as a fireplace, heating vent,
radiator, etc.
-Do not place or install this monitor in an area where it can be exposed to excessive
amounts of dust, humidity, oil, smoke, or combustible vapors.
-Prior to operation, check the monitor and power cord for physical damage. Do not
use if physical damage has occurred.
-Unplug this monitor from the power source when not in use.
-Take care to prevent damage to the power cord. Do not allow it to become
crimped, pinched, walked on, or become tangled with other cords. Ensure that the
power cord does not present a tripping hazard.
-Never unplug the monitor by pulling on the power cord. Always grasp the
connector head or adapter body.
1
-Clean using a soft, dry cloth only. Do not use chemical cleaners, solvents, or
detergents. For stubborn deposits, moisten the cloth with warm water.
-This monitor has no user serviceable parts. Do not open the case or otherwise
attempt to modify this monitor.
-Do not leave a single image on the display for a long period of time. Doing so could
cause "burn-in" of the image. It is recommended to use a variable desktop
background and to use a screen saver to prevent "burn-in". Alternatively, ensure
that the monitor is powered off for at least 2 hours out of every 12.
-
PACKAGE CONTENTS
1 x 32” QHD 1440p Monitor
-1x Base
-1x Stand
-1x Thank You Card and User Manual
-1x Power Cable
-1x DP to Mini DP cable
-8x Screws
CUSTOMER SERVICE
The Monoprice Customer Service department is dedicated to ensuring that your ordering,
purchasing, and delivery experience is second to none. If you have any problem with your
order, please give us an opportunity to make it right. You can contact a Monoprice
Customer Service representative through the Live Chat link on our website
www.monoprice.com during normal business hours (Mon-Fri: 5am-7pm PT, Sat-Sun: 9am-
2
6
HARDWARE INSTALLATION
Wall Mounting (Optional)
NOTE: For use only with a UL Listed Wall Mount Bracket.
To obtain a wall-mounting kit or height adjustment base, contact
Monoprice . Refer to the instructions that come included or along
with the base mounting kit. To convert your display from a desk-
mounted to a wall-mounted display, do the following:
1. Find VESA compatible wall-mounting kit which meets the
quaternions in section "Specifications".
2. Verify that the power button is turned Off, then disconnect the
power cord.
3. Lay the display face down on a towel or blanket.
4. Remove the base. (Screws removal might be required.)
5. Attach the mounting bracket from the wall mounting kit using
screws of the appropriate length.
6. Attach the display to the wall, following the instructions in the
wall-mounting kit.
3
USING THE KENSINGTON LOCK
The Kensington security connector is located on the back side of the
monitor. For more information on installation and usage please visit
the Kensington website at http://www. kensington.com.
Below is an example of setting up the Kensington lock on a table for
your reference.
*This picture is for reference only
4
5
Please do not connect the DisplayPort out on the monitor
to the DisplayPort or mini DP connector on the computer.
DisplayPort out is used for daisy chain connection (Explained
in section C)
Video and Audio Cable
For a MAC with Thunderbolt output, please connect the
mini DP end of the “mini DP to DisplayPort cable” to the
Thunderbolt output of MAC. And connect the other end of the
cable to the DisplayPort connector on the rear of the monitor.
*This picture is for reference only
6
Power Cable (and AC/DC adapter if required)
Connect the female connector of AC power cord to the power
connector of monitor, and the AC plug of AC power cord to the
AC outlet.
POWER ON
Turn On LCD Monitor and Computer
Turn ON the LCD Monitor, then turn ON the computer. This
particular order (LCD monitor before computer) is important.
*This picture is for reference only
7
ADJUSTING THE SCREEN IMAGE
SETTING THE TIMING MODE
Set your monitor resolution to its recommended resolution (see
section "specification") to get the best experience possible, with
brilliant color and crisp text. Here is how:
1. Go to your display resolution settings window (each operating
system will have a different process to get there).
2. Next, adjust the display resolution setting to match your
monitor’s native resolution. This will provide you with your best
usage experience.
If you have difficulty setting the resolution or you do not see
recommended resolution as an available option, you may need
a newer video card driver. Contact your computer or video card
manufacturer to obtain the latest driver.
• If necessary, make small adjustments using H. POSITION and
V. POSITION until the screen image is completely visible. (*for
analog only). (The black border around the edge of the screen
should barely touch the illuminated “active area” of the LCD
monitor.)
8
USING THE CONTROL PANEL
After setting the timing mode, use the buttons on the front or
rear control panel to display and adjust OSD for screen image
adjustment.
* The postition refer to section 2.2
Bezel & OSD symbol explanation
The bezel symbol explanation is stated below:
Standby Power On/Off
NOTE: Power light
Blue = ON
Orange = Power Saving
Toggles between the various input options that are available for
that particular monitor.
Main menu icon that allows users to access the main menu.
9
13
The OSD Menu and OSD Quick-Menu Symbol explanations and
their functional uses are stated below.
Activation symbol to turn the various modes on when operating
the menu system.
Activation symbol to exit, go back or deactivate the desired
function that is selected.
Scrolls through menu options and adjusts the monitor controls.
Symbol used to go back or revert back to the previously
selected menu
Information shortcut select button, which gives users access to
the information of the monitor currently in use.
Main menu icon that allows users to access the main menu.
Hold down the icon for a few seconds to turn off the main menu
Left and right icons toggle your selected choice horizontally.
75%
The Energy Gauge displays the percentage of
maximum energy output being consumed by
the monitor in real time.
Tabla de contenidos
Otros manuales de Monitor de Monoprice
Monoprice
Monoprice 38576 Manual de usuario
Monoprice
Monoprice 37924 Manual de usuario
Monoprice
Monoprice 38035 Manual de usuario
Monoprice
Monoprice Dark Matter 42772 Manual de usuario
Monoprice
Monoprice 43021 Manual de usuario
Monoprice
Monoprice 11996 Manual de usuario
Monoprice
Monoprice 12520 Manual de usuario
Monoprice
Monoprice 24659 Manual de usuario
Monoprice
Monoprice 10707 Manual de usuario
Monoprice
Monoprice Crystal Pro 44029 Manual de usuario
Monoprice
Monoprice 43021 Manual de usuario
Monoprice
Monoprice 12077 Manual de usuario
Monoprice
Monoprice 34in CrystalPro Curved 1000R VA Panel Manual de usuario
Monoprice
Monoprice 10734 Manual de usuario
Monoprice
Monoprice 34711 Manual de usuario
Monoprice
Monoprice 31006 Manual de usuario
Monoprice
Monoprice 12178 Manual de usuario
Monoprice
Monoprice 43020 Manual de usuario
Monoprice
Monoprice 24657 Manual de usuario
Monoprice
Monoprice 33821 Manual de usuario
