Mod Duo X Manual de usuario
3.1.4 Headphone/CC jack
■
3.1.5 Power jack
■
3.1.6 Control Chain port
■
3.1.7 USB Host port
■
3.1.8 USB computer port
■
3.1.9 DIN-MIDI I/O
■
3.1.10 SPDIF out
■
3.2 Actuators
■
3.2.1 Endless knobs
■
3.2.2 Left endless knob actions
■
3.2.3 Right endless knob actions
■
3.2.4 Knobs
■
3.2.5 Buttons
■
3.2.6 Performance buttons
■
3.2.6.1 Instant snapshots
■
3.2.6.2 Pagination
■
3.3 Displays
■
3.3.1 Left Display
■
3.3.2 Right Display
■
3.4 Dimensions
■
3.5 LED Audio meters
■
4 Adjusting Volumes
■
5 Tuning
■
6 Playing
■
6.1 Instant Snapshots
■
6.2 Switching pages
■
7 True Bypass
■
8 Device Settings
■
9 Editing
■
9.1 Accessing the graphical interface
■
9.2 Accessing via USB cable
■
9.3 Accessing via Bluetooth
■
Warnings
RISK OF FIRE, ELECTRICAL SHOCK OR PRODUCT DAMAGE
Do not expose the apparatus to rain, moisture, dripping or splashing and avoid placing objects
■
filled with liquid, such as vases, on or near the apparatus.
Only use accessories approved by the manufacturer.
■
• Do not open the enclosure. There are no user repairable parts inside. Leave service and repairs to
trained service personnel only.
AUDIO OUTPUTS WARNING !
• Always mute or turn down the volumes before connecting any equipment to the audio or
headphone outputs. • The apparatus is capable of outputting loud signals via the audio and
headphone outputs. These volume levels may damage your gear. Verify that the output volume is set
to a level that your equipment can handle. • High volume levels may damage your hearing, please
protect your hearing by paying attention to the output volume.
POWER ADAPTER WARNING !
• The adapter may only be used indoors • To ensure adequate ventilation, do not place the power
adapter in tight spaces. • To prevent risk of electric shock and fire because of overheating, please
ensure that curtains and other objects do not prevent adapter ventilation.
Overview
The wireframe images below expose the controls and inputs/outputs that the MOD Duo X has.
Device features
Inputs and outputs
Inputs jacks
The MOD Duo has two independent audio inputs, with configurable input gain for each input. You
can set up the input gain through the device menu.
Expression/CC Input
Output jacks
The MOD Duo has two independent audio outputs, with configurable output gain for each outut. You
can set up the output gain through the device menu.
Headphone/CC jack
The headphone output on the MOD Duo monitors output 1 and 2. It is possible to set the volume
level of the headphone output through the device menu.
Power jack
The MOD Duo comes with its own approved power supply which outputs 12V, 2A over a center-
positive barrel-type plug.
TODO: Add plug dimensions, minimum power requirements
The power consumption of the MOD Duo varies depending on the peripherals connected to the
device. For example: Hooking up a USB-hub to the USB-A port, and then hooking up multiple MIDI
controllers to the hub will change the power requirements. By using the provided power supply you
are sure that you will never run out of juice.
Control Chain port
TODO: explain use for CC, advantage over MIDI
NOTE: Please do NOT connect this port to a regular Ethernet port, it can damage your MOD Duo.
USB Host port
In the most common scenario, this port is used to hook up a single USB-MIDI device, such as a MIDI-
keyboard to control generator plugins.
Another common scenario is using this port to hook up a Bluetooth dongle for wireless connection to
your PC.
NOTE: The port can also be split up into multiple ports using a USB-hub for connecting multiple
USB devices to the MOD Duo.
USB computer port
This port is mostly used to connect the MOD Duo to your PC for setting it up. When executing a
manual system update, its use changes to a mass-storage device, so that you can copy the update-file
to the MOD Duo.
DIN-MIDI I/O
Finally, the MOD Duo also supports old-school DIN-MIDI devices, simply hook up your DIN-MIDI
device to the appropriate port on the back and enjoy!
SPDIF out
Actuators
IMAGE: Duo X actuators diagram
Endless knobs
Left endless knob actions
Hold the left knob to access and exit the Device Settings menu
■
Turn the left knob to scroll through the device menu
■
Right endless knob actions
Hold the knob to activate master volume control
■
Turn it to control the master output volumes
■
Press and hold it again to exit master volume control
■
Note: You can also control output volumes in Settings > System > Outputs menu
Knobs
Duo X has 8 knobs that can be used to control plugins parameters. See how to assign plugin
parameters to actuators.
Buttons
Duo X has 4 buttons that can be used to control plugins parameters. It can hold switch parameters,
such as a bypass switch, enumerators and tap tempo parameters. See how to assign plugin
parameters to actuators.
Performance buttons
On the top center of the Duo X, there are three performance buttons.
Instant snapshots
The left and right buttons are the instant snapshots buttons, that allow you to create and load
snapshots of your current state on the fly. See the Instant Snapshots section below to learn how to
use them.
Pagination
The button on the center is the pagination button that allows you to switch between 3 different
pages holding different controls for all actuators. See the Switching Pages section below to learn
how to use it.
Displays
The MOD Duo X has two large (2.8") LCD displays. The displays normally give dynamic information
about the actions mapped to the device actuators, but they are also used for displaying the device
menu and tuner.
Each part of the display corresponds to one of the actuators. (See image on the right)
How each section of the screen maps to each actuator
Left Display
The top section of the left display shows the Current Pedalboard name.
The section just below it shows the control mapped to the left endless knob.
The four following sections represent the four knobs.
The bottom section represents the two left buttons. Notice that the background color changes to
identify the parameter status.
Right Display
The top section of the right display shows the Master Volume. The Master Volume can be adjusted
by pressing and holding the right endless knob. See more information in the Adjusting Volumes
section.
The rest of the sections represent each actuator in the same way as in the left display, but mapping
to the knobs and button on the right.
Dimensions
LED Audio meters
The LED colors represent the following input levels:
Off: below -30dB
■
Green: between -30dB and -12dB
■
Yellow: between -12dB and -3dB
■
Red: above -3dB
■
Blinking strong red: 0dB (CLIPPING!)
■
Adjusting Volumes
Detail of the right display showing the Master Volume
To adjust the Master output volume, press and hold the right endless knob. This will turn this knob
into the master output volume control.
Press and hold it again to exit this mode.
The MOD Duo X also allows each input and output volume to be individually adjusted.
Please refer to the Inputs and Outputs Device Settings section in the wiki for more information on
that.
Tuning
The MOD Duo X has a built-in chromatic tuner that can be accessed by pressing and holding the
right knob for one second. Both inputs can be used as the tuner input, to select between them short
press the right knob. To exit the tuner press and hold the right knob for one second.
If you see a question mark on the tuner screen, it means the MOD Duo is not receiving any input or
the input levels are too low.
Please refer to the Tuner section in the Device Settings page for more information.
Playing
After you have powered on and adjusted the volumes of your MOD Duo X, it is ready for playtime.
The MOD Duo X comes with many pedalboards ready to be used. They are organized in banks and
can be accessed via SETTINGS menu.
Please refer to the Banks section on the Device Settings page for more information.
When you load a pedalboard, all plugin parameters will have the last saved state. You can save a
new state or restore the last saved state using the Settings > Current Pedalboard menu.
Instant Snapshots
While performing, you can create and load snapshots of your configuration on the fly. This will
save/restore all parameters of all knobs, encoders and buttons that are controlling plugin
parameters.
There are two Instant Snapshots buttons you can use. They are the most left and right buttons at the
top center part of the Duo X panel.
IMAGE: Details showing the position of the Instant snapshot buttons
Press and hold an Instant snapshot button for a second to save a new Snapshot. The button will
quickly blink and then the light will turn on. When the light is ON, it means there is an Instant
Snapshot saved and ready to be loaded. Quickly press the button to reset your device to the state of
the saved snapshot.
Switching pages
Note: The animation above does not show it in details, but Buttons and Endless knobs are
also paginated.
Duo X allows you to switch between 3 pages of settings. This means that the 8 knobs, 2 endless
knobs and 4 buttons are actually 24 knobs, 6 endless knobs and 12 buttons. When you address a
plugin parameter to a Duo X actuator, you can choose in which page you want to address the
parameter to.
IMAGE: screenshot: detail of the address interface in the GUI showing the 3 pages of actuators.
The pagination button is the central of the 3 top buttons in the Duo X panel. It's light indicate the
current selected page:
1st page: red
■
2nd page: yellow
■
3rd page: green
■
Otros manuales para Duo X
1
Tabla de contenidos
Otros manuales de Hardware de computadora de Mod
Manuales populares de Hardware de computadora de otras marcas
EMC2
EMC2 VNX Series Manual del propietario
Panasonic
Panasonic DV0PM20105 Manual de usuario
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manual de usuario
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manual de usuario
Raidon
Raidon iT2300 Manual de usuario
National Instruments
National Instruments PXI-8186 Manual de usuario
