Mocet IG7600 Manual de usuario
IG7600
Smartphone Business
Communication
System
Copyright © 2015, All Rights Reserved.
Ver16141105
IG7600 Smartphone Business Communication System Quick Installation Guide
- 1 -
Installation Components
M22
IG7600 Smartphone Business Communication System Quick Installation Guide
- 2 -
System Installation
Follow the flowchart to install IG7600 system. The red number (1) ~ (8) is marked at upper
left corner of each process block. You can find the detail explanation by these numbers in
the following pages.
IG7600 Smartphone Business Communication System Quick Installation Guide
- 3 -
(1) PSTN Lines Connection
You can connect up to four (4) analog (standard or PSTN) telephone lines to your IG7600.
Connect one line to each port, in the order that you want them to ring 1 – 4.
(2) Install IG7600 behind a router
Connect the WAN port of your IG7600 to your existing network, leave the LAN port
disconnected after using it for initial installation programming.
(IG7600 is connecting to a router) (IG7600 is connecting to a modem router)
Use the telephone line
cords to connect the
telephone lines to the
IG7600.
IG7600 Smartphone Business Communication System Quick Installation Guide
- 4 -
Powering up
Plug the IG7600 in and allow it to power up without connecting any telephones. When the
power LED stops flashing the IG7600 will be fully powered up and operational.
Login Web page of IG7600
Use an Ethernet cable to connect your Personal Computer, Laptop or Desktop running
Windows XP, Vista or Windows7/8, to the LAN port of the IG7600.
Open your browser and enter 192.168.123.1 in the address bar, and press enter. When
prompted enter the user name, which is “admin1234” and password which is the word
“admin” plus the last 6 alphanumeric characters of the system’s “WAN MAC” address
(lower case), which is found on the label on the back of the system.
- Default IP address: 192.168.123.1
- User name: admin1234
- Password: adminxxxxxx
Attention: To secure your system against unwanted outside intrusion (hacking), we
strongly recommend that the first thing you do is change all of the System’s
Passwords! Before you begin programming you should change all three levels of
passwords, admin1234, support and user. A password of up to 16 alphanumeric
characters may be used and we recommend that you use at least 10.
The best passwords consist of upper and lower case characters and punctuation.
MAKE SURE TO MAKE A NOTE OF YOUR PASSWORD!
To change the password, log in as the Administrator go to:
For Example,
WAN MAC address: 001915DA73FB
Password: adminda73fb
IG7600 Smartphone Business Communication System Quick Installation Guide
- 5 -
Management --> Access Control --> Password
Default Login and Passwords:
Level/Rights Login Default
Password New Password
Administrator admin1234 adminxxxxxx
Administrator support supportxxxxxx
User (Limited) user userxxxxxx
xxxxxx = The last 6 alphanumeric characters of the system’s WAN MAC Address
(lower case)
IG7600 Smartphone Business Communication System Quick Installation Guide
- 6 -
(3) System Configuration
1. Set IG7600 WAN to static IP address
2. Set router’s Port Forwarding to IG7600 or DMZ Setting in router
1. Set IG7600 WAN to Static IP address
The existing network (Router) will assign an IP address to IG7600 WAN, set the IP
address to static IP in WAN page in IG7600.
Go to Advanced Setup -> WAN, and then change “Network Type” to Static.
IG7600 Smartphone Business Communication System Quick Installation Guide
- 7 -
2. Set router’s Port Forwarding to IG7600 or DMZ Setting in router
The tablet lists these ports which are used by IG7600. These ports must be opened for
IG7600.
Used by Protocol
Port Range
IG7600-MOCET Changeable
Need port forwarding
(When behind NAT)
SIP UDP 5070 Y
Y
(Mandatory for remote phone
application)
RTP Proxy UDP 35000 ~ 35150 N
Y
(Mandatory for remote phone
application)
DSP Bound UDP 40000 ~ 40012 N
Y
(Mandatory for remote phone
application)
Paging Caller RTP
UDP 20500, 20510, 20520,
20530 N
Y
(Only when you need to enable
paging call function for remote
phone)
IGCP UDP 38600 N
Y
(Mandatory for remote phone
application)
IGDDP UDP 38500 N
Y
(Only when you deploy IGW
Group function)
IP Camera TCP 38800~38808 N
Y
(Only when you need to access
to IP Camera from remote phone
(M54))
PTC UDP 5897 Y
Y
(Only when you deploy
APS-PTC function)
Web TCP 80 Y
Y
(Only when you need accessing
Web server from remote)
FTP TCP 21 Y
Y
(Only when you need accessing
FTP server from remote)
TFTP UDP 69 Y Y
(Only when you need accessing
IG7600 Smartphone Business Communication System Quick Installation Guide
- 8 -
TFTP server from remote)
Telnet TCP 23 Y
Y
(Only when you need accessing
Telnet from remote)
SSH TCP 8822 Y
Y
(Only when you need accessing
SSH from remote)
Door Phone TCP 49003~49006
(reserved) N
Y
(Only when you need to access
to Door Phone from remote
phone)
Live Record UDP 35248, 35151~35248
N
Y
(Only when you need to enable
Live Recording function for
remote)
(4) Assign router WAN IP Address to NAT Traversal
When router WAN is a static IP address, setup the Router External Address to router
WAN IP in NAT Traversal page.
Step 1: Go to Voice --> NAT Traversal
Step 2: Setup the Router External Address to WAN IP address
Step 3: Uncheck UPNP Port-Mapping Enable
Step 4: Click “Save Settings” button.
Uncheck UPNP Port
-
Mapping Enable
.
Input router WAN IP address.
IG7600 Smartphone Business Communication System Quick Installation Guide
- 9 -
(5) Router WAN Is Assigned a Dynamic IP
IG7600 Configuration
1 Setup DDNS
2 Assign DDNS Host Name to NAT Traversal
1. Setup DDNS
When the router’s WAN is assigned a dynamic IP from ISP (Internet Service Provider),
You need to configure DDNS (Dynamic DNS) in IG7600.
(If you don’t know what the network type is, please check with your ISP)
Step 1: Go to Advanced Setup --> Dynamic DNS
Step 2: Select “Use Manual DDNS” and then click “Save” button
Step 3: Click “Add” button
Otros manuales para IG7600
3
Tabla de contenidos
Manuales populares de Sistema de conferencias de otras marcas
Kramer
Kramer VIA GO Manual de usuario
AVT
AVT MAGIC AC1 Go Manual de usuario
ProSoft Technology
ProSoft Technology AN-X4-AB-DHRIO Manual de usuario
Sony
Sony PCS-I150 Manual de usuario
Middle Atlantic Products
Middle Atlantic Products VTC Series Manual de usuario
Prentke Romich Company
Prentke Romich Company Vanguard Plus Guía
