MO Smart Bode Analyzer Manual de usuario
USER MANUAL
[DON’T FORGET TO CHANGE THE MODEL IN THE ABOVE
PICTURE]
Smart Body Analyzer
Model: MO-1501-M
Free App
Date: 2016.02
Version: 2016V1
Smart Body Analyzer
Model: MO-1501-M
Table of Contents
Introduction
Warnings
Product Description
Instructions
About Body Fat and BMI
Care and Maintenance
Problem Solving
Product Specifications
Questions and Answers
FCCStatement
Introduction
Thank you for purchasing the MO Smart Body Analyzer (MO-1501-M). You will now be able to
effortlessly measure, track and share health and fitness information. This user manual will guide
you through the setup process and provide key information about the scale itself. Please read it
completely and keep it handy for future reference.
The scale uses the method of Bioelectrical Impedance Analysis (BIA) to estimate body fat, bone
mass, water content and muscle mass. It sends a harmless amount of electriccurrent into the body,
then estimates, from the measured impedance of the body, the percentage of body fat, bone mass,
water content and muscle mass. It is intended for adult use in the home.
All rights reserved to More Technology International Inc.
PRODUCT LIST
Scale ×1
E-INK screen (includeMetalpatch、Magnetbase) ×1
Usb charging cable ×1
Reset needle ×1
User manual ×1
Quick start guide ×1
Warnings
1.Do not use this device if: You are acutely or chronically ill, sufferingfrom a disease or taking
medications that affect your water levels. The accuracy of readings for these patients has not been
verified.
2.Any information provided by this device is in no way meant to treat, cure or prevent any
disease or illness from happening.
3.Specific medical advice should be obtained from a physician.
4. Do not disassemble the scale as incorrect handling may cause injury.
5. Do not step on the scale when your body or feet are wet, especially after bathing or showering
to prevent slipping.
•This MO scale is equipped with a data transmission function. It may emit electromagnetic
energy so as to perform its intended function. Nearby portable and mobile RF
communicationequipments can affect the performance of the MO scale. Portable and mobile RF
communicationequipments can affect the accuracy of this MO scale.
•Warning that the use of accessories, transducers and cables other than those specified by the
manufacturer of the MO scale as replacement- parts for internal components, may result in
increased EMISSIONS or decreased IMMUNITY of the MO.
•The distance between the scale and the Bluetooth should be reasonably close, between 3 to 30
feet. Please ensure that there are no obstacles between the scale and the Bluetooth so as to obtain
a quality connection. To avoid interference, other electronics devices (particularly those with
Bluetooth®)should be kept at least 3 feet away from the scale.
Normal Mode
1.Do not use on pregnant women. The result is inaccurate and effects on the fetus are unknown.
2.Body fat percentage estimates will vary with the amount of water in the body, and can be
affected by dehydration or over-hydration due to such factors as alcohol consumption,
menstruation, illness, intense exercise, etc.
3.The Normal mode is not suitable for people who wear electronic medical devices including
pacemaker.In these cases,please use “safe mode”.
Safe Mode
1.Under safe mode,the scale will operate as a basic weight-measuring scale.
2.Please use the switch at the bottom of the scale to turn on/off the safe mode.
3.There will be no electric current under “safe mode”.
1.ITO glass 2.LED light 3.Sensor 4.Mode switch 5.Charging port
6.WiFi 7.indoor/outdoor/BMI 8.Indoor/outdoor temperature 9. Weight/time 10.Body fat 11.BMI
/Humidity13.E-INK screen 14.Power switch 15.Charging port/Reset
[Please change the picture: LED screen -> E-INK screen, remove PM2.5]
Instructions
Turn on the screen
Take out the screen.Press until the screen is turned on
Tips:
1.when the screen automatically turns off, please try re-charging it.
2.Please allow 4-6 hours to fully charge the screen.
3.Normally, the screen can show time, indoor/outdoor temperature and humidity.
Make sure you are on the right mode
Safe mode Normal mode
The default setup is on “Normal mode” Please switch to “Safe mode”if you are pregnant.
Download and install the App
You can find the App in App store by searching “MO Health”.
MOSCALE REQUIREMENTS
The MO Scale is designed to be used with the following mobile devices:
•iOS
iPhone®, iPad®, iPod Touch®, iPad mini® using iOS 8.1 and above
•Android4.3 and above
• Compatible with devices running Bluetooth® 4.0 technology and above
Link the scale with App
Please turn onthe mobile phone’s bluetoothand then perform the following:
Click on the device found If you fail to add device by searching it, please try
device manager
1.Open the blue tooth on your mobile phone
2.Add device
3.Follow the tips to configure
Safe mode
Switch at the bottom of the scale
Orange light
Switch to the safe made
Please use “Safe Mode” only when:
1.You are Pregnant
2.You have a pace maker or any other implanted electronic devices.
About charging
1. The scale is rechargeable with internal lithium battery
2.When the battery is low,the red light will be flashing. During charging process the green light will be flashing.
3.When charging is completed,the green light will be on. There will be aWiFi icon shown on the screen.
Rest when the following occurs
1.No weight is show on the screen
2.Failed to be connected to WiFi
About Accessories
MetalpatchMagnetbaseE-INK screenResetneedleUSBcharging cable
Metal patch
Magnet base Satellitescreen
The satellite display can be mounted on the wall
360 degree adjustable
USE MO
How to measure correctly?
1.Make sure your WiFi is on and the WiFi is correctly setup for the screen.
2.Please put the scale on a flat,hard floor surface.
3.You need touse the product with yourbare feet for accurateresults. Remove your shoes
or socks before using the product.
4.Balance your weight evenly between both feet and stand still for a few seconds until
you see a light on.
The correct position to stand
About Body Fat and BMI
1. Why is it important to monitor percentage body fat (%BF)?
The absolute weight traditionally determines whether or not a person is obese. Weight change in
itself does not indicate whether it was the weight of body fat or muscle that had changed. In
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Manuales populares de Instrumento de medición de otras marcas
Endress+Hauser
Endress+Hauser Proline Promag 50 Especificaciones técnicas
Siemens
Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas
KLINGER
KLINGER CMF V Series Manual de usuario
EXFO
EXFO FTB-2 Manual de operación y mantenimiento
Keysight
Keysight M8290A Manual de usuario
ADTEK
ADTEK MW-5 Manual de usuario