Mo-vis Stealth Products Twister Manual de usuario

OWNERS MANUAL
Twister
Stealth’s mo-Vis Series Mechanical Normal
Open Switch
Alternative Drive Controls

i
Customer Satisfaction 1.0
Stealth Products strives for 100% customer satisfaction. Your complete
satisfaction is important. Please contact us with feedback or suggested
changes that will help improve the quality and usability of our products.
You may reach us at:
General
The Twister switch is a single mechanical open switch intended to act as an
additional activation site along with the Multi Joystick and All-Round Joystick.
Read and understand all instructions prior to the use of the product. Failure to
adhere to instructions and warnings in this document may result in property
damage, injury, or death. Product misuse due to failure of the following
instructions will void the warranty.
Immediately discontinue use if any function is compromised, parts are missing,
loose, or shows signs of excessive wear. Consult with your supplier for repair,
adjustment, or replacement.
If this document contains information you do not understand, or there are
concerns about safety or operation, contact your supplier.
MDSS GmbH
Schiffgraben 41
30175 Hannover, Germany
Stealth Products, LLC
104 John Kelly Drive, Burnet, TX 78611
Phone: (512) 715-9995 Toll Free: 1(800) 965-9229
Fax: (512) 715-9954 Toll Free: 1(800) 806-1225

ii
Important Information 2.0
Important Information!
All persons responsible for fitting, adjustment, and daily use of the devices
discussed in these instructions must be familiar with and understand all safety
aspects of the devices mentioned. In order for our products to be used
successfully, you must:
Read and understand all instrucons and warnings.
Maintain our products according to our instrucons on care and maintenance.
Devices should be installed and adjusted by a trained technician.
Supplier Reference
Supplier:
Telephone:
Address:
Purchase Date:
Model:

Introduction 3.0
iii
Before you install or begin using this product, it is important that you read and
understand the content of these installation and operating instructions.
The installation instructions will guide you through the options and possibilities
with the Stealth mo-Vis Series Twister.
Instructions are written with the expressed intent of use with standard
configurations. They also contain important safety and maintenance
information, as well as describe possible problems that can arise during use.
For further assistance, or more advanced applications, please contact your
supplier or Stealth Products at (512) 715-9995 or toll free at 1 (800) 965-9229.
Always keep the operating instructions in a safe place so they may be
referenced as necessary.
All information, pictures, illustrations, and specifications are based on the
product information that was available at the time of printing. Pictures and
illustrations shown in these instructions are representative examples and are
not intended to be exact depictions of the various parts of the product.
Ordering Documentation
You can download additional copies of this user manual on the Stealth website:
https://stlpro.site/stealth-docs
and search: mo-Vis Twister Owners Manual in the search bar at the top of the
page.
iii

iv
Warranty 4.0
Our products are designed, manufactured, and produced to the highest of
standards. If any defect in material or workmanship is found, Stealth Products
will repair or replace the product at our discretion. Any implied warranty,
including the implied warranties of merchantability and fitness for a particular
purpose, shall not extend beyond the duration of this warranty. Stealth
Products, LLC does not warrant damage due to, but not limited to:
Misuse, abuse, or misapplicaon of products.
Modicaon of product without wrien approval from Stealth Products, LLC.
Any alteraon or lack of serial number, where applicable, will automacally void this
warranty.
Stealth Products, LLC is liable for replacement parts only.
Stealth Products, LLC is not liable for any incurred labor costs.
No person is authorized to alter, extend, or waive the warranties of Stealth
Products, LLC.
Stealth Products warrants against failure due to defective materials or
workmanship:
Covers: 2 years
Hardware: 5 years
Electronics: 3 years
In Case of Product Failure
In the event of product failure covered by our warranty, please follow the
procedures outlined below:
1. Call Stealth at +1 (512) 715-9995 or toll free +1-800-965-9229.
2. Request the Returns Department or obtain an RA from the Returns Department and follow
department or documentaon instrucons.

v
Table Of Contents 5.0
1.0 Customer Satisfaction..............................................................................i
2.0 Important Information ...........................................................................ii
3.0 Introduction ............................................................................................iii
4.0 Warranty ..................................................................................................iv
5.0 Table Of Contents...................................................................................v
6.0 Warning Labels ........................................................................................1
6.1 Warning Labels........................................................................................................1
6.2 Limited Liability.......................................................................................................1
6.3 Testing ........................................................................................................................1
7.0 Design and Function ..............................................................................2
7.1 Intended Use............................................................................................................2
7.2 Features......................................................................................................................2
8.0 Parts And Accessories .............................................................................3
8.1 Available Twister Switches..................................................................................3
8.2 Specifications ..........................................................................................................4
9.0 Installation Instructions..........................................................................5
9.1 Preparation ...............................................................................................................5
9.2 Installation Plan.......................................................................................................5
9.3 Twister On Bent Tube ...........................................................................................6
9.4 Twister Basic.............................................................................................................6
9.5 Satellite Twister .......................................................................................................7
9.6 Twister Dome Switch............................................................................................8
10.0 Functioning ..........................................................................................10
10.1 Operating The Twister .................................................................................... 10
10.2 Twister Safety .....................................................................................................10
10.3 Safe Driving......................................................................................................... 10

vi
Table Of Contents 5.0
11.0 Testing...................................................................................................11
11.1 Check Twister................................................................................................... 11
11.2 Operational Test ............................................................................................. 11
11.3 Test Drive...........................................................................................................11
11.4 Stop Test............................................................................................................ 11
12.0 First Time Use.......................................................................................12
12.1 Dealer Assistance ........................................................................................... 12
12.2 User Testing........................................………………………….…………...……....12
12.3 Conditions Of Use.......................................................................................... 12
13.0 Maintenance.........................................................................................13
13.1 Cleaning .............................................................................................................13
13.2 Monthly ..............................................................................................................13

1
Warning Labels 6.0
Warning Labels 6.1
Warnings are included for the safety of the user, client, operator and property. Please
read and understand what the signal words SAFETY, NOTICE, CAUTION, WARNING
and DANGER mean, how they could affect the user, those around the user, and property.
Limited Liability 6.2
Stealth Products, LLC accepts no liability for personal injury or damage to property that
may arise from the failure of the user or other persons to follow the recommendations,
warnings, and instructions in this manual.
Stealth Products does not hold responsibility of final integration of final assembly of
product to end user. Stealth Products is not liable for user death or injury.
Testing 6.3
Initial setup and driving should be done in an open area free of obstacles until the user is
fully capable of driving safely.
The Twister should always be tested without any person sitting in the wheelchair until
every alteration of the physical installation or adjustment of the joystick it is connected to
is complete.
NOTICE
Identifies important information not related to injury, but
possible property damage.
SAFETY
Indicates steps or instructions for safe practices, reminders of
safe procedures, or important safety equipment that may be
necessary.
CAUTION Identifies a potential situation which (if not avoided) will
result in minor to moderate injury,and property damage.
WARN ING Identifies a potential situation which (if not avoided) will
result in severe injury, death,and property damage.
DANGER Identifies an imminent situation which (if not avoided) will
result in severe injury, death,and property damage.

2
Design And Function 7.0
Intended Use 7.1
The Twister is a small, durable, and reliable single switch which requires only
the slightest touch on its surface for activation. Up to two switches can be
plugged into either the interface of the mo-Vis joysticks (can be plugged into
the interface ONLY of the Micro), or the inputs on the joysticks (Multi and
All-Round only) and used as a power switch for on/off, or mode functions.
Features 7.2
The Twister switch:
Is available in four dierent styles:
-Twister Basic Buon
-Twister on Bent Tube
-Satellite Twister (Compable with All-Round Joysck only)
-Twister Dome Switch
Requires minimal force (30g, .067 lbf)
Has a small surface diameter:
- .67in (17mm)
- .5mm distance to acvaon
1/8” (3.5mm) mono jack plug

3
Parts And Accessories 8.0
Available Twister Switches 8.1
Product Description Part Number
Twister Basic Cable
(available in 5 colors)
Yellow (IDM-24)
Black (IDM-25)
Red (IDM-26)
Blue (IDM-27)
Green (IDM-28)
Twister on Bent Tube, Long
Cable (1500mm)
Red (IDM-34)
Black (IDM-35)
Yellow (IDM-36)
Blue (IDM-37)
Green (IDM-38)
Twister on Bent Tube, Short
Cable (300mm)
Black (IDM-41)
Red (IDM-42)
Yellow (IDM-43)
Blue (IDM-44)
Green (IDM-45)
Tabla de contenidos
Otros manuales de Cambiar de Mo-vis




















