MJX R/C Bugs 6 Manual de usuario
Bugs Series Brushless Drone with GPS
User Manual
1080P Camera
One key return
GPS Positioning Brushless motor
（1806 1800KV）
Independent ESC
(automatic lock protection,
high temperature lock protection)
Two direction 2.4GHZ
(weak signal alarm, low voltage alarm)
Super-long control
distance
（Recording camera）
-1-
Contents:
Important Statement And Safety Guildlines
Product Configuration
Major Parts Of The Remote Controller
LCD Screen
How To Install The Battery Of Remote Controller
Remote Cotroller Signal Connection
Throttle Mode Switch
How To Change Throttle Mode
Control Sticks Calibration
Remote Controller Status Indicator
Major Parts Of The Aircraft
How To Charge The Battery Of Aircraft
Product Assemble
Aircraft Status Indicator
Link Your Aircraft To The Remote Controller
Gyroscope Calibration
Aircraft Initialization Detection
Aircraft Compass Calibration
How To Lock And Unlock The Aircraft
One-Key Takeoff/Landing
Gesture Mode
GPS Mode
Headless Mode
Return-To-Home(RTH)
Smart RTH
Failsafe Return
Low Voltage RTH
Photo/Video
Low Voltage Warning
Signal Strength Indicator
Before You Take Off, Check And Make Sure That
Flight Steps
Product Components
Trouble Shooting
1
2
3
3
4
4
4
5
6
7
7
8
9
11
11
12
12
12
13
14
14
14
14
15
15
15
16
16
16
17
17
17
17
19
-2--1-
Important Statement
Flight Safety Guidelines
● This aircraft is not a toy, but hobby grade model. It should be assembled and operated properly. Pilot
must operate this hobby model in safe way. Improper operation may cuase injury or property damage.
● This aircraft is applicable for pilots aged 14+ who are with skilled flying experience.
● Users are in full charge of proper operating this aircraft. Manufacturer and dealers disclaim any
responsibity for damages caused by misuse.
● Keep the small accessories away from kids to avoid accident.
● Stay away from obstacles, crowds, power lines, trees or waters
● Keep the aircraft in dry environment
Important Statement And Safety Guidelines
Thank you for purchasing MJX product. Please read this manual carefully before use and retain it for
future reference.
Hobby grade radio control aircraft is somewhat considered to be the highest danger potential article.
Users should firmly uphold the principle of “safety comes first”. Never fly the aircraft near airports,
above crowds or in zones storing dangerous goods and understand the responsibility of the accident
may cause by improper operations.
Always choose a wide open area for every flight, well away from people and property. Never fly directly
over people or animals. Please don't fly in such bad weather conditions as high temperature, snow,
strong wind(≥level 5), rain or fog. Maintain a 7ft (2m) distance from the aircraft when taking off and
landing.
● Practice flying together with skillful pilot
Beginners are suggested to practice flying together with skillful pilot’s guidance. Do not fly alone.
The aircraft is composed by sophisticated electronic components and mechanical parts. To avoid
damages on the mechanical and electronic components, please keep the aircraft in dry environment
and use clean cloth to wipe the surface and keep it clean.
-3-2-
Product Configuration
Product Profile
Screwdriver X1Caed reader X1 TF memory card X1
Product/spare parts included in the box
Aircraft X1
Extra Propellers A/B X2
Battery X1 Charger X1Remote controller X1
Propeller changing tool X1
Aircraft weight(included battery): about 440g
Brushless motor: 1806 KV1800 Charging Time:about 5 hoursBattery: 7.4V1800 mAh Li-polymer
Maximum flying time: about 16.5 minutes
Diagonal: 310mm Overall height: 75mm
Technical parameter of the aircraft
● Bear proper operation and safe flight guidelines in mind
Please take a careful look at the manuals before flights for important information of product functions
and operation tips, and learn how to use the accessory, safe flight always comes first. Stay informed
of and abide strictly by relevant local laws and regulations. Keep away from any non-flight zones and
respect other people's privacy.
● Safe flying
● Keep distance from a flying aircraft
Please make sure you are in good shape mentally before every flight. Fly the aircraft as per your flying
experience. Never fly under influence of alcohol or drugs.Keep the remote controller at least 20 cm
away from your body when flying the aircraft.
Never use your hands to touch a flying aircraft under any circumstance. Don’t approach and touch a
landed aircraft before its propellers are completely locked.
● Keep away from heat source
The aircraft is made of metal, fiber, plastic, electronic component and other material. Please keep it
away from the heat source to avoid deformation or even damage caused by sun exposure and high
temperature.
● Environmental protection requirements
To protect our blue planet, so please recycle the aircraft as per local laws and regulations.
-4-
-3-
A B A B
[8] Return-to-Home(RTH)/One key landing
[9] Unlock
[10] Photo/Video
[11] Enter/Exit Return-to-Home
LCD Screen
Remote Controller
Battery Level
GPS mode icon
Satellite Number
Altitude against
Home Point
Photo
Video Headless mode icon
Return-to-Home(RTH) icon
Aircraft Battery Level
Signal strength
Remote Controller
Throttle Mode
Model
Distance against
Home Point
[1] Left stick
[2] Gesture/ GPS mode Switch
[3] Power indicator
[4] Power switch
[5] Right stick
[6] Headless mode Switch
[7] LCD Display
Major Parts Of The Remote Controller
[8]
[9]
[10]
[11]
[1]
[2]
[7]
[5]
[6]
[4]
[3]
Model
-5-
-4-
!
Left hand throttle and right hand throttle are available for option at the remote controller. User can
choose different control stick mode as per operation habit. There are 4 stick modes that could be found
as below:
Throttle Mode Switch
Attention: When the remote controller is under signal connection status, please keep your
hands away from the remote controller. If any operation is done, the remote
controller will exit signal connection that will result in signal connection failure.
Press the red button on top of the remote controller and turn on the power of the remote controller. The
remote controller will send out 2 beep sounds, and the indicator lights keep flashing, the remote
controller is under signal connection status.
Remote Controller Signal Connection
Model
How To Install The Battery Of Remote Controller
Unscrew counter clockwise to open the battery compartment cover, install 4x AA batteries into the
battery compartment according to the given polarity, screw clockwise to close the battery compartment.
!●Insert batteries with correct polarity.
●Non rechargeable batteries are not to be charged; the transmitter need 4 X AA batteries for
work.
●Do not mix old and new batteries.
●Do not mix alkaline,standard(carbon-zinc),or rechargeable(nickel-cadmium) batteries.
●Rechargeable batteries are to be removed from the toy before being charged;
●Rechargeable batteries are only to be charged under adult supervision;
●Exhausted batteries are to be removed from the toy;
●The supply terminals are not to be short-circuited.
A B A B
-6-
-5-
Stick Mode
Mode:2
Throttle control
Leftward/Rightward
flight control
Forward Control
Turn Left/Right
control
Mode:4
Throttle control
Leftward/Rightward
flight control
Forward Control
Turn Left/Right
control
Backword
control
Mode:3
Throttle control
Leftward/Rightward
flight control
Forward Control
Turn Left/Right
control
Model Model
Mode:1
Throttle control
Leftward/Rightward
flight control
Forward Control
Turn Left/Right
control
Model Model
!Attention: To change the stick mode of the remote controller , please make sure that your
aircraft is under signal connection status( the indicator light keep flashing). If not,
the stick mode could not be changed.
When the remote controller is under signal connection status, long-press the RTH button for 3 seconds
to choose the throttle control mode.The throttle control mode will change according to each press. The
mode number is shown on the LCD screen. The throttle control mode is set by mode 2 by default.
Remote Controller
Throttle Mode
Model
How To Change Throttle Mode
Backword
control
Backword
control
Backword control
-7-
-6-
Model
!Attention: Please do not power on your aircraft when calibrate the control stick for the
remote controller.
Warm tips:
Control sticks calibration has been completed by default. It is not
necessary to calibrate the control stick unless pilot has felt unnormal
stick travel.
Control Stick Calibration
How to calibrate the control sticks
Turn on the remote controller. Push down the calibration button and hold on for 3
seconds. The remote controller will send out 3 beep sounds; the indicator light of
the remote controller turns from flashing quickly to slowly. Maximum rotate both of
the left and right control stick to any direction for 2 circles. Then, again, push down
the calibration button and hold on for 3 seconds. The remote controller will send out
3 beep sounds; the indicator light of the remote controller turns from flashing slowly
to quickly, which means that control sticks calibration is completed.
( rotate for 2 circles at the same time)
-8-
-7-
Remote Controller Status Indicator
NO.
1
2
3
4
5
Remote Controller Status
Indicator lights flash quickly.
Signal legend on LCD display is less than
two grids or no displaying, with steady beep...
beep...beep sound.
The remote controller is under signal connection
status.
The remote controller is in low voltage status.
1.The distance between aircraft and remote
controller is so long that the signal is weak.
2.The battery is removed nearly after the aircraft
connects to the remote controller.
Operation
Indicator lights flash slowly with steady beep..
beep sound and the battery legend “ ”on
LCD display flashing.
Battery legend “ ” on LCD display is as
shown, with steady beep..beep...beep sound.
Battery is running out “ ” ; the aircraft will return
when the altitude is over 100m or the distance is
over 300m.
Battery legend “ ” on LCD display is as
shown, with steady long beep sound.
Battery is low “ ” ; the aircraft will return when
the altitude is over 15m or the distance is over
15m, or land immediately.
[2]
[3]
[6]
[8]
[7]
MADE INCHINA
Major Parts Of the Aircraft
[1]
[1]
[2]
Brushless motor
[3]
Propeller
Camera
[4]
[5]
[4]
Battery compartment
TF Card Slot
[5]
[6]
[7]
[8]
Front indicator light
Rear indicator light
Battery
-9-
-8-
Power outletChargerBattery
How To Charge The Battery Of Aircraft
How to charge the battery with charging device A:
1. Insert the charger plug to the power outlet, the charger indicator turns green;
2. Connect the triple-lines plug of the battery with the charger power line to charge the battery;
3. The charger indicator keeps solid red when charging is proceeding and turns green once the battery
is full-charged. Full Charging takes about 5 hours.
How to charge the battery with charging device C:
1. Connect the charger plug with power outlet; plug the charger wire into the socket located at the right
side of the balance charging controller. At this moment, red light and green light are both solid on;
2. Insert the triplex-wire plug of the battery into the triplex-wire socket of the balance charging controller
and charging is proceeding;
3. Green light is off and red light is on when the battery is being charged. Green light and red light will be
both on once battery is full charged. Full Charging takes about 5 hours.
How to charge the battery with charging device B:
1.Connect the balance charger to any USB interface (5V adapter or any device with USB interface) by
the USB cable. At this moment, the red light is solid on and the green light is off;
2.Insert the triplex-wire plug of the battery into the triplex-wire socket of the balance charging controller
and charging is proceeding;
3.The green light keeps flashing slowly and the red light keeps solid on when battery is being charged;
when charging is finished, both of the green light and red light keep solid on. Once there is any
malfunction, the red light will be solid on and green light will keepflashing rapidly. Full Charging takes
about 5 hours.
To cater different demands from end users, 3 charging devices are designed and
optional for charging.
Charging device A：1 X adaptor only;
Charging device B：1 X USB cable and 1X balance charging controller;
Charging device C：1 X adaptor and 1 X balance charging controller.
Product will be packed with any of the 3 charging device.User should check the package to
confirm which charging device is included before reading charging method.
Battery Balance charger USB charging outlet
USB
Otros manuales para Bugs 6
3
Tabla de contenidos
Otros manuales de Zumbido de MJX R/C
