Mitsubishi FX2N-16LNK-M Manual de usuario

USER’S MANUAL

FX2N-16LNK-M MELSEC-I/O LINK

REMOTE I/O SYSTEM MASTER BLOCK

FX2N-16LNK-M MELSEC-I/O LINK REMOTE I/O SYSTEM MASTER BLOCK

Foreword

• This manual contains text, diagrams and explanations which will guide the reader in the correct installation

and operation of the FX2N-16LNK-M MELSEC-I/O LINK REMOTE I/O SYSTEM MASTER BLOCK. It

should be read and understood before attempting to install or use the unit.

• Further information can be found in the FX PROGRAMMING MANUAL(ΙΙ), FX0N/FX1N/FX2N/FX2NC series

hardware manuals.

• If in doubt at any stage of the installation of FX2N-16LNK-M MELSEC-I/O LINK REMOTE I/O SYSTEM

MASTER BLOCK always consult a professional electrical engineer who is qualified and trained to the local

and national standards that applies to the installation site.

• If in doubt about the operation or use of FX2N-16LNK-M MELSEC-I/O LINK REMOTE I/O SYSTEM

MASTER BLOCK please consult the nearest Mitsubishi Electric distributor.

• This manual is subject to change without notice.

FX2N-16LNK-M MELSEC-I/O LINK REMOTE I/O SYSTEM MASTER BLOCK

USER’S MANUAL Manual number : JY992D73701

Manual revision : D

Date : October 2004

FX2N-16LNK-M MELSEC-I/O LINK REMOTE I/O SYSTEM MASTER BLOCK

Guidelines for the safety of the user and protection of the FX2N-16LNK-M MELSEC-I/O LINK SYSTEM

MASTER BLOCK

This manual provides information for the installation and use of the FX2N-16LNK-M MELSEC-I/O LINK

SYSTEM MASTER BLOCK. The manual has been written to be used by trained and competent personnel.

The definition of such a person or persons is as follows:

a) Any engineer who is responsible for the planning, design and construction of automatic equipment

using the product associated with this manual, should be of a competent nature, trained and qualified

to the local and national standards required to fulfill that role. These engineers should be fully aware of

all aspects of safety with regards to automated equipment.

b) Any commissioning or service engineer must be of a competent nature, trained and qualified to the

local and national standards required to fulfill that job. These engineers should also be trained in the

use and maintenance of the completed product. This includes being completely familiar with all

associated documentation for said product. All maintenance should be carried out in accordance with

established safety practices.

c) All operators of the completed equipment (see Note) should be trained to use this product in a safe

manner in compliance to established safety practices. The operators should also be familiar with

documentation which is associated with the actual operation of the completed equipment.

Note : The term ‘completed equipment’ refers to a third party constructed device which contains or uses the

product associated with this manual.

Notes on the Symbols Used in this Manual

At various times throughout this manual certain symbols will be used to highlight points which are intended to

ensure the users personal safety and protect the integrity of equipment. Whenever any of the following

symbols are encountered its associated note must be read and understood. Each of the symbols used will

now be listed with a brief description of its meaning.

FX2N-16LNK-M MELSEC-I/O LINK REMOTE I/O SYSTEM MASTER BLOCK

iii

Hardware warnings

Software warnings

1 ) Indicates that the identified danger WILL cause physical and property damage.

2 ) Indicates that the identified danger POSSIBLY cause physical and property damage.

3 ) Indicates a point of further interest or further explanation.

1 ) Indicates special care must be taken when using this element of software.

2 ) Indicates a special point of which the user of the associate software element should be aware.

3 ) Indicates a point of interest or further explanation.

FX2N-16LNK-M MELSEC-I/O LINK REMOTE I/O SYSTEM MASTER BLOCK

• Under no circumstances will Mitsubishi Electric be liable responsible for any consequential damage

that may arise as a result of the installation or use of this equipment.

• All examples and diagrams shown in this manual are intended only as an aid to understanding the

text, not to guarantee operation. Mitsubishi Electric will accept no responsibility for actual use of the

product based on these illustrative examples.

• Please contact a Mitsubishi Electric distributor for more information concerning applications in life

critical situations or high reliability.

FX2N-16LNK-M MELSEC-I/O LINK REMOTE I/O SYSTEM MASTER BLOCK Contents

CONTENTS

1. Notes to User .............................................................................................1-1

1.1 Outline of product ...................................................................................................... 1-1

1.2 Manual configuration and diversified data ................................................................. 1-2

2. Product Specifications ...............................................................................2-1

2.1 System configuration ................................................................................................. 2-1

2.2 Appearance and name of each portion .....................................................................2-3

2.3 General specifications and performance specifications ............................................ 2-4

3. Connection and Wiring ..............................................................................3-1

3.1 Cautions on connection ............................................................................................. 3-1

3.2 Connection method ................................................................................................... 3-7

4. Operation ...................................................................................................4-1

4.1 Operating procedure .................................................................................................. 4-1

4.2 Setting and function of each portion .......................................................................... 4-2

4.3 Setting of station No. .................................................................................................4-7

4.4 Program ..................................................................................................................... 4-8

5. Troubleshooting .........................................................................................5-1

6. Remote I/O Unit .........................................................................................6-1

6.1 Model name structure ................................................................................................6-1

6.2 Outside dimensions ................................................................................................... 6-2

Appendix ...................................................................................................... A-1

FX2N-16LNK-M MELSEC-I/O LINK REMOTE I/O SYSTEM MASTER BLOCK Contents

MEMO

FX2N-16LNK-M MELSEC-I/O LINK REMOTE I/O SYSTEM MASTER BLOCK Notes to user 1

1-1

1. Notes to User

1.1 Outline of product

The MELSEC-I/O LINK REMOTE I/O SYSTEM MASTER BLOCK FX2N-16LNK-M (hereinafter referred to as

"master block") is connected to an FX0N/FX1N/FX2N/FX2NC Series programmable controller (PC), and realizes

a remote I/O system which saves wiring and enables easy programming for communication with remote I/O

units.

Applicable PC

The master block can be connected as a special block of an FX0N/FX1N/FX2N/FX2NC Series PC.

When it is connected to an FX2NC Series PC, a connector conversion interface FX2NC-CNV-IF is required.

Features

1 ) Many control points

One master block can control up to 128 points (64 input points and 64 output points) (when mixed I/O

type remote I/O units having 8 or 16 control points are used).

To one master block, up to 16 remote I/O units can be connected.

2 ) Wiring saving

A master block and a remote I/O unit can be easily connected with a twisted-pair or cabtyre cable.

3 ) Total extension distance: 200 m

The distance can be extended up to 200 m in the entire system.

Terminal resistors are not required, and connection using T branches can be realized.

4 ) Free from system down caused by failure in one station

Even if failure has occurred in a remote station in the system, the system does not come down.

Diversified error indication LEDs facilitate quick troubleshooting.

5 ) Easy programming

Element Nos. for inputs (X) and outputs (Y) are assigned to remote I/O units in the same way as general

I/Os.

Communication programs are not required.

FX2N-16LNK-M MELSEC-I/O LINK REMOTE I/O SYSTEM MASTER BLOCK Notes to user 1

1-2

1.2 Manual configuration and diversified data

This user manual exclusively is packed together with the master block.

For programs in a basic PC unit, handling of remote I/O units, etc., refer to the corresponding data.

User manual (this manual)

This manual describes cautions on safety, specifications, attachment and wiring of the master block, program-

ming and troubleshooting.

User manual of MELSEC-I/O LINK REMOTE I/O SYSTEM MASTER UNIT AJ51T64/A1SJ51T64

(detailed volume)

This manual describes the specifications of remote I/O units connected to the master block.

Tabla de contenidos

Otros manuales de Controladores de Mitsubishi

Mitsubishi

Mitsubishi FX3U-20SSC-H Manual de usuario

Mitsubishi

Mitsubishi FX1S Series Manual del propietario

Mitsubishi

Mitsubishi FX3U Series Manual de usuario

Mitsubishi

Mitsubishi CR800 Series Manual de usuario

Mitsubishi

Mitsubishi AJ65BT-R2N-U-HW Manual de usuario

Mitsubishi

Mitsubishi AD71S1 Manual de usuario

Mitsubishi

Mitsubishi MELSEC-L Series Manual del propietario

Mitsubishi

Mitsubishi Q64TCRT Manual de usuario

Mitsubishi

Mitsubishi MELSEC Q Series Manual del propietario

Mitsubishi

Mitsubishi FX-10GM Manual de usuario

Mitsubishi

Mitsubishi Q2ACPU Manual de usuario

Mitsubishi

Mitsubishi MELSEC iQ-F series Manual de usuario

Mitsubishi

Mitsubishi MELSEC-A A1SCPUC24-R2 Manual de usuario

Mitsubishi

Mitsubishi FX3G-2AD-BD Manual de usuario

Mitsubishi

Mitsubishi Q Series Instrucciones de funcionamiento

Mitsubishi

Mitsubishi AL2-14MR-A Manual de usuario

Mitsubishi

Mitsubishi A-Melsec A1FXCPU Manual de usuario

Mitsubishi

Mitsubishi MELSEC Q Series Manual del propietario

Mitsubishi

Mitsubishi FX3U-485ADP Manual de usuario

Mitsubishi

Mitsubishi G-50A Manual de usuario

Mitsubishi

Mitsubishi q64rd Manual de usuario

Mitsubishi

Mitsubishi MELSEC iQ-F Manual de usuario

Mitsubishi

Mitsubishi MELSEC Q Series Manual de usuario

Mitsubishi

Mitsubishi AL2-2PT-ADP Manual de usuario

Manuales populares de Controladores de otras marcas

Digiplex

Digiplex DGP-848 Instrucciones de funcionamiento

YASKAWA

YASKAWA SGM series Manual de usuario

Sinope

Sinope Calypso RM3500ZB Manual de usuario

Isimet

Isimet DLA Series Style 2 Manual de instalación

LSIS

LSIS sv-ip5a Manual de usuario

Rockwell Automation

Rockwell Automation 1769-L31 Manual de usuario

Airflow

Airflow Uno hab Manual de usuario

ABB

ABB ACS580-01 drives Manual de usuario

Panasonic

Panasonic GM1 Series Manual de usuario

Emerson

Emerson SW93 Manual de usuario

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manual de usuario

Panasonic

Panasonic FP? Positioning Unit RTEX Manual de usuario

Samson

Samson Type 5824 Manual de servicio

Alpha IP

Alpha IP MIOB 21001 Manual de usuario

Siemens

Siemens OpenAir GMA 1 Series Manual de usuario

Surecom

Surecom SR-629 Manual de usuario

Fishman

Fishman TriplePlay Manual de usuario

Regulus

Regulus SRS1 T Manual de usuario