Mitsubishi Electric FR-A7NL Guía de configuración

1/12 BCN-C22005-454-A

FR-A7NL Instruction Manual Supplement

Plug-in option (E kit/E kit cover) dedicated for the FR-E700

series

1PRE-OPERATION INSTRUCTIONS

1.1 Unpacking and Product Confirmation

Take the plug-in option out of the package, check the product name, and confirm that

the product is as you ordered and intact.

This product is a plug-in option unit dedicated for the FR-E700 series.

CAUTION

•Install a provided front cover for plug-in option, in place of the inverter front cover.

REMARKS

•Echelon, LONWORKS, LonMaker, LONMARKand Neuronare registered trademarks of

Echelon Corporation in the U.S.A. and other countries.

Company and product names herein are the trademarks and registered trademarks of their

respective owners.

2/12 BCN-C22005-454-A

1.1.1 SERIAL number

Check the SERIAL number indicated on the inverter rating plate or package.

For the 200V class of FR-E700, this option can be used with the inverter having the

following SERIAL number or later. (For the 400V class of FR-E700, this option can be

used with all inverters regardless of SERIAL number.)

zSERIAL number check

Refer to the inverter manual for the location of the rating plate.

Type SERIAL number

FR-E720-0.1K to 0.75K J7Y{{{{{{

FR-E720-1.5K to 5.5K K7Y{{{{{{

FR-E720-7.5K L7Y{{{{{{

FR-E720-11K, 15K G7Y{{{{{{

Rating plate example

7 Y {{{{{{

Symbol Year Month Control number

SERIAL number

The SERIAL consists of 1 version symbol, 2 numeric characters or 1 numeric character and 1

alphabet letter indicating year and month, and 6 numeric characters indicating control number.

Month is indicated as 1 to 9, X (October), Y (November), and Z (December).

3/12 BCN-C22005-454-A

1.1.2 Packing confirmation

Check the enclosed items.

*1 Not included in the plug-in option E kit cover for the FR-E700 series.

*2 Used with the FR-E720-3.7K (FR-E720-175) or less and FR-E740-7.5K (FR-E740-170) or less.

Plug-in option

.......................................... 1 *1

Mounting screw (M3

6mm)

..........................................2 *1

Terminal block

.......................................... 1 *1

Front cover for plug-in option

.............................................. 1

Option protective cover

..........................................1 *2

Option small cover (Not used)

..............................................1

NeuronID bar code sticker....................................................................................................... 1

(Since one bar code sticker is for maker duplicate, three stickers are provided.)

4/12 BCN-C22005-454-A

2INSTALLATION AND WIRING

2.1 Installation Procedure

The FR-E700 series has one connection connector for the plug-in option.

CAUTION

•Always perform wiring to the main circuit terminals and

control circuit terminals before installing the option. Wiring

cannot be performed after installing the option.

For wiring to terminal RUN, FU, SE of control circuit terminal,

run cables to prevent them from being caught between the

option board and control circuit terminal block as shown in

the right figure. In case cables are caught, the inverter may be

damaged.

•When the inverter cannot recognize that the option is

mounted due to improper installation, etc., " " (option

alarm) is displayed.

•Take care not to drop a mounting screws during mounting and removal.

•Pull out the option straight to remove. Otherwise, the connector may be damaged.

REMARKS

•Because the voltage class, model name and serial (only voltage class is labeled for FR-E740-

5.5K (FR-E740-120) or more) are stated on the PU cover, replace a PU cover of a plug-in

option front cover with the removed PU cover from the inverter.

Plug-in

option

5/12 BCN-C22005-454-A

zFor FR-E720-3.7K (FR-E720-175) or less and FR-E740-7.5K (FR-E740-170) or less

(1) Remove the front cover from the inverter. (For removing the front cover, refer to the FR-E700

instruction manual.)

(2) Remove the PU cover from the front cover. Open the PU cover with a driver, etc. and remove it in

the direction of arrow as shown below.

(1) Front cover

(2) PU cover

* Open the PU cover, then open it toward the arrow

direction to remove.

6/12 BCN-C22005-454-A

(3) Install the option protective cover.

(4) Securely fit the connector of the plug-in option to the inverter connector along the guides.

(5) Securely fix the both top and bottom of the plug-in option to the inverter with the accessory

mounting screws. If the screw holes do not line-up, the connector may not have been plugged

snugly. Check for loose plugging.

(6) Remove the PU cover provided on the front cover for plug-in option and install the other PU cover,

which was removed in (2).

(7) Mount the already wired terminal block to the plug-in option.

(8) Install the front cover for plug-in option to the inverter.

7/12 BCN-C22005-454-A

REMARKS

•When the option protective cover is not installed, the protective structure (JEM1030) changes

to open type (IP00).

(4)

(5)

(7)

(8)

Option

connector

of inverter

(3) Option protective cover

Mounting screws

Front cover

for plug-in option

(6) Replace

8/12 BCN-C22005-454-A

zFor FR-E720-5.5K (FR-E720-240) or more and FR-E740-11K (FR-E740-230) or more

(1) Remove the front cover 1 and 2 from the inverter. (For removing the front cover, refer to the FR-

E700 instruction manual.)

(2) Remove the PU cover from the front cover 2. For removing the PU cover, refer to page 5.

Front cover 1

Front cover 2

(1)

(2)

PU cover

(1)

9/12 BCN-C22005-454-A

(3) Install the front cover 1 to the inverter.

(4) Securely fit the connector of the plug-in option to the inverter connector along the guides.

(5) Securely fix the both top and bottom of the plug-in option to the inverter with the accessory

mounting screws. If the screw holes do not line-up, the connector may not have been plugged

snugly. Check for loose plugging.

(6) Remove the PU cover provided on the front cover for plug-in option and install the other PU cover,

which was removed in (2).

(7) Mount the already wired terminal block to the plug-in option.

(8) Install the front cover for plug-in option to the inverter.

10/12 BCN-C22005-454-A

Installation completed

(7)

(6)

Replace

(8)

Front cover for

plug-in option

(5) Mounting screws

(4) Option connector of inverter

(3)

Otros manuales para FR-A7NL

Tabla de contenidos

Otros manuales de Unidad de control de Mitsubishi Electric

Mitsubishi Electric

Mitsubishi Electric Q66DA-G Manual de usuario

Mitsubishi Electric

Mitsubishi Electric MELSEC-F FX2N-1HC Manual de usuario

Mitsubishi Electric

Mitsubishi Electric GT16H-CNB-42S Manual de usuario

Mitsubishi Electric

Mitsubishi Electric MELSEC-L LD75P Manual de usuario

Mitsubishi Electric

Mitsubishi Electric Trane TE-200A Manual de usuario

Mitsubishi Electric

Mitsubishi Electric GOT 1000 Series Manual de usuario

Mitsubishi Electric

Mitsubishi Electric AJ65DBTB1-32D Manual de usuario

Mitsubishi Electric

Mitsubishi Electric GT1055-QSBD Instrucciones de funcionamiento y mantenimiento

Mitsubishi Electric

Mitsubishi Electric MELSEC iQ-F Series Manual de usuario

Mitsubishi Electric

Mitsubishi Electric MELSEC Q Series Manual de usuario

Mitsubishi Electric

Mitsubishi Electric MELSEC Q Series Manual de usuario

Mitsubishi Electric

Mitsubishi Electric AJ65SBTB2N-16S Manual de usuario

Mitsubishi Electric

Mitsubishi Electric iQ-F Series Manual de usuario

Mitsubishi Electric

Mitsubishi Electric MELSEC Q Series Manual de usuario

Mitsubishi Electric

Mitsubishi Electric MELSEC Q Series Manual de usuario

Mitsubishi Electric

Mitsubishi Electric PAC-AH125 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric MELSEC iQ-R RD78G4 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric MELSEC iQ-R Series Manual de usuario

Mitsubishi Electric

Mitsubishi Electric AJ65BT-D62 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric AJ65VBTCU-68ADVN Manual de usuario

Mitsubishi Electric

Mitsubishi Electric QD75P1N Manual de usuario

Mitsubishi Electric

Mitsubishi Electric MN Converter Manual de usuario

Mitsubishi Electric

Mitsubishi Electric A1S68DAV Manual de usuario

Mitsubishi Electric

Mitsubishi Electric AJ65BT-RPI-10A Manual de usuario

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario