Mitsubishi Electric AE-200A Manual de usuario
Contents
Safety precautions....................................................................2
1. Introduction .........................................................................4
1-1. Screen images used in this manual............................................4
1-2. PC requirements.........................................................................4
1-3. Connection method.....................................................................5
2. Setting the Operating Environment.....................................6
2-1. Setting the IP address of the PC.................................................6
2-2. Disabling a proxy server .............................................................8
2-3. Installing .NET Framework..........................................................9
3. Installation and uninstallation of BACnet®Setting Tool.....10
3-1. Installation.................................................................................10
3-2. Uninstallation ............................................................................13
4. Connecting and starting up the BACnet®Setting Tool ......14
4-1. Connecting the BACnet®Setting Tool .......................................14
4-2. Starting up the BACnet®Setting Tool........................................15
4-3. Exiting the BACnet®Setting Tool ..............................................16
5. BACnet®Setting Tool screens and setting items ..............17
5-1. Screen configuration.................................................................17
5-2. Menu bar configuration .............................................................18
5-3. Setting tab configuration ...........................................................19
5-4. Initial setting procedure.............................................................20
6. Saving settings data .........................................................23
6-1. Settings data flow .....................................................................23
6-2. Backing up settings data...........................................................23
7. Menu bar...........................................................................24
7-1. File ............................................................................................24
7-2. AE-200/AE-50/EW-50 ...............................................................25
7-3. Help ..........................................................................................28
8. Setting screens .................................................................29
8-1. Explanation of Screen Buttons .................................................29
8-2. System Settings........................................................................31
8-3. Group Settings..........................................................................34
8-4. BACnet®Settings......................................................................35
Attachment 1 BACnet®network configuration and settings
examples ................................................................................57
Air Conditioning Control System
Centralized Controller
AE-200A/AE-50A/EW-50A
AE-200E/AE-50E/EW-50E
Before using the controller,
please read this Instruction
Book carefully to ensure proper
operation.
Retain this manual for future
reference.
Instruction Book
–BACnet®Setting Tool–
2
WT07921X01
Safety precautions
►Observe these precautions carefully to ensure safety.
►After reading this manual, pass the manual on to the end user to retain for future
reference.
►The user should keep this manual for future reference and refer to it as necessary. This
manual should be made available to those who repair or relocate the units. Make sure
that the manual is passed on to any future air conditioning system user.
: indicates a hazardous situation which, if not avoided, could result in
death or serious injury.
: indicates a hazardous situation which, if not avoided, could result in
minor or moderate injury.
: addresses practices not related to personal injury, such as product
and/or property damage.
General precautions
Do not install the controller in areas where large amounts of oil, steam, organic solvents,
or corrosive gases (such as ammonia, sulfuric compounds, or acids), or areas where
acidic/alkaline solutions or special chemical sprays are used frequently. These substances
may significantly reduce the performance and corrode the internal parts, resulting in
electric shock, malfunction, smoke, or fire.
To reduce the risk of short circuits, current leakage, electric shock, malfunction, smoke, or
fire, do not wash the controller with water or any other liquid.
To reduce the risk of electric shock, malfunction, smoke, or fire, do not touch the electrical
parts, USB memory, or touch panel with wet fingers.
To reduce the risk of injury or electric shock, before spraying a chemical around the
controller, stop the operation and cover the controller.
To reduce the risk of injury, keep children away while installing, inspecting, or repairing the
controller.
If you notice any abnormality (e.g., burning smell), stop the operation, turn off the
controller, and consult your dealer. Continuing the operation may result in electric shock,
malfunction, or fire.
Properly install all required covers to keep moisture and dust out of the controller. Dust
accumulation and the presence of water may result in electric shock, smoke, or fire.
To reduce the risk of fire or explosion, do not place flammable materials or use flammable
sprays around the controller.
To reduce the risk of electric shock or malfunction, do not touch the touch panel, switches,
or buttons with a sharp object.
To avoid injury from broken glass, do not apply excessive force to the glass parts.
To reduce the risk of injury, electric shock, or malfunction, avoid contact with the sharp
edges of certain parts.
3
WT07921X01
Consult your dealer for the proper disposal of the controller. Improper disposal will pose a
risk of environmental pollution.
Precautions for relocating or repairing the unit
The controller must be repaired or moved only by qualified personnel. Do not disassemble
or modify the controller. Improper installation or repair may result in injury, electric shock,
or fire.
Additional precautions
To avoid discoloration, do not use benzene, thinner, or chemical rag to clean the controller.
When the controller is heavily soiled, wipe the controller with a well-wrung cloth that has
been soaked in water with mild detergent, and then wipe off with a dry cloth.
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety. Children should be supervised to ensure that they do not play
with the appliance.
4
WT07921X01
1. Introduction
This manual is the Instruction Book for AE-200/AE-50/EW-50 (hereinafter referred to as “AE-200”) BACnet®
Setting Tool. The BACnet ®Setting Tool is dedicated software to set network settings and settings related to
BACnet®communication (also including object selection and COV/Event notification) and then set the settings to
the AE-200. This manual describes the setting procedures for those settings.
1-1. Screen images used in this manual
Screen images used in this manual are from Microsoft®Windows®7. The layout of screens for software other
than the BACnet®Setting Tool (e.g., installation screens) that are displayed in this Instruction Book may differ
depending on factors such as the settings of the PC used.
Registered trademarks
Windows®is a registered trademark or trademark of Microsoft Corporation in the United States and other countries.
Excel®is a registered trademark or trademark of Microsoft Corporation in the United States and other countries.
BACnet®is a registered trade mark of ASHRAE (American Society of Heating, Refrigerating and Air-Conditioning
Engineers, INC.). (“BACnet” is indicated for screens of the BACnet®Setting Tool.)
Other company names and product names appearing in this manual are trademarks or registered trademarks of their
respective companies.
1-2. PC requirements
The BACnet®Setting Tool runs on a PC.
The PC used for the BACnet®Setting Tool requires the following environment.
Item Requirement Remarks
CPU 1 GHz or higher
Memory 1 GB or more
HDD space 100 MB or more C drive
Screen resolution 1024 x 768 or higher
LAN 1 port (100 BASE-TX)
OS
Microsoft®Windows®7 32-bit/64-bit
Microsoft®Windows®8.1 32-bit/64-bit
* Not compatible to Windows Vista®.
Execution environment Microsoft®.NET Framework 4.5 or later
Others
Pointing device such as a mouse
Internet connection environment (required when
installing .NET Framework)
5
WT07921X01
1-3. Connection method
The BACnet®Setting Tool connects with the AE-200 using a LAN. *1
Connect the PC with the BACnet®Setting Tool installed to the LAN1 connector of the AE-200 via a HUB (refer to
the figure below). For the LAN cable, use a cable that is compatible with category 5 or higher.
*1 Connect the BACnet®Setting Tool with the AE-200 using IPv4.
Before performing BACnet®settings for the AE-200 using the BACnet®Setting Tool, it is necessary to set indoor
unit group settings on the AE-200 Initial Setting Tool. Refer to section 5-4 “Initial setting procedure” for details.
For systems that use multiple AE-200, set all AE-200 connected to BACnet®individually using the BACnet ®
Setting Tool.
After completion of AE-200 BACnet ®settings, connect the AE-200 LAN2 and BACnet®.
(A) When controlling more than 50 units of equipment
and not using an apportioned electricity billing
function
(B) When using an apportioned electricity billing
function
×
×
BACnet®
Setting Tool
Outdoor unit
HUB
Outdoor unit
ME remote controller
ME remote controller
Indoor unit
LAN1
Indoor unit
M-NET
LOSSNAY
M-NET
LOSSNAY
BACnet®
M-NET
HUB
AE-200
Building management system
LAN2
BACnet®
Building management system
HUB
BACnet®
Setting Tool
LAN2
LAN1
LAN2
LAN1
AE-200
LAN2
LAN1
AE-50/EW-50
M-NET
LAN2
M-NET
AE-50/EW-50
LAN1
M-NET
AE-50/EW-50
BACnet®
Setting Tool
BACnet®setting target
M-NET
BACnet®
Building management system
HUB
LAN2
LAN1
LAN2
LAN1
LAN2
LAN1
AE-200
LAN2
LAN1
AE-50/EW-50
LAN2
AE-50/EW-50
LAN1
NOT connect to
M-NET
AE-50/EW-50
M-NET
M-NET
BACnet®setting target
AE-50/EW-50
M-NET
M-NET
HUB
HUB
6
WT07921X01
2. Setting the Operating Environment
Set the operating environment of the PC to be used for the BACnet®Setting Tool.
2-1. Setting the IP address of the PC
Set the IP address of the PC to be used for the BACnet®Setting Tool. Set an IP address for the PC that does
not duplicate the IP address of LAN1 of each AE-200 (initial value: 192.168.1.1) but is an IP address of the same
network.
For example, when the IP address of LAN1 of the AE-200 is the default value [192.168.1.1] and the subnet mask
is the default value [255.255.255.0], set [192.168.1.101] for the IP address of the PC to be used for the BACnet®
Setting Tool. In this case, [192.168.1] is the network address.
Connecting terminal Default value Remarks
LAN1 192.168.1.1 (Used for air conditioning system)
LAN2 192.168.2.1 (Used for BACnet®communication)
The following describes the procedure to change the IP address for a PC running Windows 7®. Note that the
following screens may differ depending on the PC.
(1) Click [Control Panel] in the Start menu.
(2) In the [Control Panel] window, click [View network status and tasks].
* Select “Category” in “View by.”
(3) In the [Network and Sharing Center] window, click [Change adapter settings].
7
WT07921X01
(4) In the [Network Connections] window, click [Local Area Connection].
(5) In the [Local Area Connection Properties] window, click [Internet Protocol Version 4 (TCP/IPv4)] to select it,
and click [Properties].
(6) In the [Internet Protocol Version 4 (TCP/IPv4) Properties] window, check the radio button next to [Use the
following IP address].
Enter the IP address (e.g., [192.168.1.101]) in the [IP address] field, and enter the subnet mask (e.g.,
[255.255.255.0]) in the [Subnet mask] field.
(7) Keep clicking [OK] or [Close] to close all windows.
8
WT07921X01
2-2. Disabling a proxy server
Configure the settings for the IP connection environment of the PC (disable a proxy server).
(The screens and setting examples are when using Internet Explorer®8.)
(1) Start up the Web browser (Internet Explorer®8).
(2) Click [Tools] in the menu bar, then click [Internet options].
(3) In the [Internet Options] window, click the [Connections] tab.
Check the radio button next to [Never dial a connection] in the middle of the window, and click [LAN
settings] under [Local Area Network (LAN) settings].
(4) In the [Local Area Network (LAN) Settings] window, remove the check from the checkbox next to [Use a
proxy server for your LAN] under [Proxy server].
(5) Keep clicking [OK] or [Close] to close all windows.
9
WT07921X01
2-3. Installing .NET Framework
(1) Click [Control Panel] in the Start menu, click [Programs and Features], and check the version of the
Microsoft®.NET Framework.
(2) If the version of the Microsoft®.NET Framework is before 4.5, install Microsoft®.NET Framework 4.5 from
the URL below.
URL:
http://www.microsoft.com/en-US/download/details.aspx?id=42642
10
WT07921X01
3. Installation and uninstallation of BACnet®Setting
Tool
This chapter explains how to install the BACnet®Setting Tool (SetBACnet) to a PC and how to uninstall it.
If you click [Cancel] in any of the steps during the installation or uninstallation, the installation or uninstallation will
be canceled. Also, to return to the previous screen, click [Back].
3-1. Installation
(1) Starting the setup program
Double click the Integration Installer for AE-200 *1. When setting the AE-200 BACnet®functions, the
following two types of setting tool are required.
•AE-200 BACnet®Setting Tool
•AE-200 Initial Setting Tool
Select the check box ( ) for the setting tool to install, then click [Install].
Clicking [Install] will run the installer for the selected setting tool.
*1 The name of the installer for North America is “AE-200AToolInstaller_V730.exe”, and for Europe is “AE-200EToolInstaller_V730.
exe”.
The following details the BACnet®Setting Tool installer. Refer to the AE-200 Instruction Book (Initial
Settings) for how to set up the AE-200 Initial Setting Tool.
(2) Starting the BACnet®Setting Tool setup program
Read the displayed information, and click [Next] to proceed.
Otros manuales para AE-200A
14
Este manual sirve para los siguientes modelos
5
Tabla de contenidos
Otros manuales de Acondicionador de aire de Mitsubishi Electric
Mitsubishi Electric
Mitsubishi Electric MSZ-FA25VA-E1 WH Manual de usuario
Mitsubishi Electric
Mitsubishi Electric TRANE TPVFYP012AM141 Series Manual de usuario
Mitsubishi Electric
Mitsubishi Electric PAC-YG63MCA Manual de servicio
Mitsubishi Electric
Mitsubishi Electric PUZ-M200YKA2 Manual de usuario
Mitsubishi Electric
Mitsubishi Electric CITY MULTI PEFY-P20VMA-E3 Manual de usuario
Mitsubishi Electric
Mitsubishi Electric MSZ-GL06NA Manual de usuario
Mitsubishi Electric
Mitsubishi Electric PQRY-P72-96TGMU-A Manual de usuario
Mitsubishi Electric
Mitsubishi Electric TRANE NTYWST30A112A Series Manual de usuario
Mitsubishi Electric
Mitsubishi Electric PCFY-P40VGM-E Manual de funcionamiento
Mitsubishi Electric
Mitsubishi Electric MLZ-KP25VF Manual de usuario
Mitsubishi Electric
Mitsubishi Electric PCA-RP71HAQ Manual de usuario
Mitsubishi Electric
Mitsubishi Electric MXZ-3HJ50VA Manual de usuario
Mitsubishi Electric
Mitsubishi Electric PUHZ-SHW HA Series Manual de usuario
Mitsubishi Electric
Mitsubishi Electric City Multi PLFY Series Manual de funcionamiento
Mitsubishi Electric
Mitsubishi Electric MSZ-FH09NA Manual de usuario
Mitsubishi Electric
Mitsubishi Electric MUZ-HM09NA-U2 Manual de usuario
Mitsubishi Electric
Mitsubishi Electric MSZ-GL09NA Manual de usuario
Mitsubishi Electric
Mitsubishi Electric SUZ-KA25VA2 Manual de funcionamiento
Mitsubishi Electric
Mitsubishi Electric MSZ-AY25VG-ET1 Manual de usuario
Mitsubishi Electric
Mitsubishi Electric Mr.Slim MUZ-FE09NA Manual de usuario
