Mircom TAS-2000 Series Manual de usuario

Canada

25 Interchange Way

Vaughan, ON L4K 5W3

Tel: 905-660-4655 Fax: 905-660-4113

Printed in Canada

Subject to change without prior notice

www.mircom.com

TAS-2000 Series

MSW-003 Software

LT-880 Rev. 1

September 2004

User Guide

Advanced Life Safety Solutions Advanced Life Safety Solutions

U.S.A.

60 Industrial Parkway

Cheektowaga, NY 14227

Tel: 1-888-660-4655 Fax: 1-888-660-4113

TAS-2000 MSW-003 Software Manual

Contents

Installing the Software ................................................................ 1

Connecting the Hardware ........................................................... 1

Direct Connect Method (using the RS-485IMA)....................... 1

Dial-Up Method (Using Modem)............................................... 1

Opening/creating A Job File....................................................... 2

Creating an ADC Tenant Database ............................................ 3

Creating an NSL Tenant Database ............................................ 5

Establishing a Direct Connection .............................................. 7

For Direct Cable Connection Operation ................................... 7

Establishing a Modem Connection............................................ 9

For Modem (MDM-1000A) Operation....................................... 9

Uploading Data (Lobby Panel to PC) ......................................... 11

Downloading Data (PC to Lobby Panel) .................................... 12

Changing Lobby Panel Parameters........................................... 13

Troubleshooting Guide............................................................... 14

Port is Already Used................................................................. 14

No System Detected................................................................. 14

Runtime Error ‘3024’................................................................. 14

TAS-2000 MSW-003 Software Manual

Installing the Software

To install the TAS-2000 MSW-003 Software,

• Run SETUP.EXE on the root directory folder of the MSW-003 CD, or

• Use the Windows Control Panel’s Add/Remove Programs’ install feature.

Follow the instructions on the screen. Once it is installed, you can run the

program by clicking Start->Programs->TAS 2000.

Connecting the Hardware

Direct Connect Method (using the RS-485IMA)

Connect the RS-485IMA to the PC serial port using the serial cable provided

with the RS-485IMA.

Connect the ribbon cable on the RS-485IMA to the TAS-2000 Lobby Panel via

the terminal marked RS-485 I/F. Connector designations are as follows.

• For the Slim-Line model, use connector “P2” located near the top left

corner of the main circuit board.

• For the standard model, use connector P3 located near the bottom left

corner of the main circuit board.

Dial-Up Method (Using Modem)

Connect the modem on your PC to a standard telephone line. Connect the

dedicated telephone line at the Lobby Panel to the telephone jack connector

on the MDM-1000A and connect the ribbon cable on the MDM 1000A module

to the TAS-2000 Lobby Panel via the terminal marked RS-485 I/F.

Connector designations are as follows.

• For Slim-Line model, use connector “P2” located near the top left corner

of the main circuit board.

• For Standard model, use connector P3 located near the bottom left corner

of the main circuit board.

Notes:

• If your lobby panel is configured as a Non-Subscriber Line (NSL),

skip to Creating an NSL Tenant Database on page 5.

• If using a MDM-1000A, ensure that JW1 is removed and jumpers

1 & 3 are installed.

Note: Ensure that JW1 is installed and jumpers 1 & 3 are removed

on the MDM-1000A.

Opening/creating A Job File

1. Open the TAS-2000 software by clicking Start->Programs->TAS 2000.

You will be prompted for a User Name and Password (as shown below).

The default for both is “mircom”.

2. Type “mircom” in both spaces and click OK.

The Control Panel window displays.

3. Click “Open Job File” located in the upper left on Control Panel window.

The following window displays.

4. Select an existing file from the list or type a new file name in the File

name window.

5. Click Open.

Note: “mircom” must be type in all lower case letters.

TAS-2000 MSW-003 Software Manual

Creating an ADC Tenant Database

The name of the file that is opened displays across the top of the Control

Panel window. To enter tenant names click “Show ADC”. The following window

displays.

Records may be added, edited or deleted as desired. To add records, click the

“ADD” button. The following window displays.

• Enter resident name if using scrolling directory panels, or leave blank if

using non-scrolling panels

• Enter resident apartment number (this is optional because it is used for

reference only--it will not be stored on lobby panel)

• Enter 4-digit resident dial code (for dial codes fewer than 4 digits, precede

with 0’s, e.g. 0003)

• Enter resident telephone number (maximum 14 digits)

Note: If your lobby panel is configured as a Non-Subscriber Line

(NSL), skip to Creating an NSL Tenant Database on page 5.

Creating an ADC Tenant Database

• Enter resident keyless code (this is optional because it is used for

reference only--it will not be stored on lobby panel)

• Enter default elevator code-If feature not used, enter 99

• Select default elevator ID-If feature not used, select ID-099

• Select lobby ID-factory default set as ID-001

• Click OK when finished.

In addition, you may use the Auto-Program feature by clicking the “Auto”

button in the ADC Database window. The following window displays:

• Enter number of residents to program (shown as 25)

• Enter default resident name (shown as Resident Name)

• Enter 4-digit starting dial code (shown as 1001)

• Enter starting keyless code (this is optional because it is used for

reference only--it will not be stored on lobby panel) (shown as 2001)

• Enter default elevator code-If feature not used, enter 99 (shown as 99)

• Select default elevator ID-If feature not used, select ID-099 (shown as

ID-099)

• Enter default phone # (shown as 9055551212)

• Click OK when finished

Note: When finished programming tenant records, skip to

Establishing a Direct Connection on page 7.

TAS-2000 MSW-003 Software Manual

Creating an NSL Tenant Database

The name of the file that is opened displays across the top of the Control

Panel window. To enter tenant names click “Show NSL”.

Records may be Added, Edited or Deleted as desired. To add records, click

the “ADD” button. The following window displays.

Note: If your lobby panel is configured as an Auto-Dialer (ADC), go

to Creating an ADC Tenant Database on page 3.

Creating an NSL Tenant Database

• Enter resident name if using scrolling directory panels, or leave blank if

using non-scrolling panels

• Enter resident apartment number (this is optional because it is used for

reference only--it will not be stored on lobby panel)

• Enter 4-digit resident dial code (for dial codes fewer than 4 digits, precede

with 0’s, e.g. 0003)

• Enter resident relay code (is determined by location of wires on BIX block)

• Enter resident keyless code (this is optional because it is used for

reference only--it will not be stored on lobby panel)

• Enter elevator code-If feature not used, enter 99

• Select ring pattern

• Select lobby ID-factory default set as ID-01

• Select NSL-ID, factory default set as ID-02

• Select default elevator ID-If feature not used, select ID-99

• Click OK when finished

In addition you may use the Auto-Program feature by clicking the “Auto”

button in the NSL Database window. The following window displays:

• Enter number of residents to program (shown as 25)

• Enter default resident name (shown as John Smith)

• Enter 4-digit starting dial code (shown as 1001)

• Enter starting keyless code (this is optional because it is used for

reference only--it will not be stored on lobby panel) (shown as 2001)

• Enter default elevator code-If feature not used, enter 99 (shown as 99)

• Select default elevator ID-If feature not used, select ID-99 (shown as

ID-099)

• Select default Lobby-ID (shown as ID-02)

• Enter starting relay code (shown as 0000)

• Select default NSL-ID (shown as ID-002)

Otros manuales para TAS-2000 Series

Tabla de contenidos

Otros manuales de Sistema de intercomunicación de Mircom

Mircom

Mircom 9500 Series Instrucciones de funcionamiento

Mircom

Mircom TX3-TOUCH-S15B-WR Manual de usuario

Mircom

Mircom TX3 Series Manual de usuario

Mircom

Mircom TX3-TOUCH-UPS-KIT Manual de usuario

Mircom

Mircom TX3 Nano Manual de usuario

Mircom

Mircom RA-1000 Series Manual de usuario

Mircom

Mircom EP-1000 Manual de usuario

Mircom

Mircom Autodialer ADC Series Manual de usuario

Mircom

Mircom TX3 Series Manual de usuario

Mircom

Mircom CA-1010 Manual de usuario

Mircom

Mircom TX3-TOUCH-F15-B Manual de usuario

Mircom

Mircom RAM-216 Manual de usuario

Mircom

Mircom TX3 Series Manual del propietario

Mircom

Mircom DA-100 Manual de usuario

Mircom

Mircom TX3 Series Manual de usuario

Mircom

Mircom TX3-TOUCH-F15-B Manual de usuario

Mircom

Mircom TX3 Series Manual de usuario

Mircom

Mircom TX3 Series Manual de usuario

Mircom

Mircom TX3 Series Hoja de instrucciones

Mircom

Mircom ADC Series Instrucciones de funcionamiento

Mircom

Mircom CA-1010 Manual de usuario

Mircom

Mircom TX3 Series Hoja de instrucciones

Mircom

Mircom TX3 Series Manual de usuario

Mircom

Mircom TX3 Series Manual de usuario

Manuales populares de Sistema de intercomunicación de otras marcas

Bticino

Bticino LINEA 3000 Manual de usuario

MSI

MSI MSI-140 Manual de usuario

golmar

golmar Stadio Plus Manual de usuario

CyberData

CyberData 011211 series Manual

Vidos

Vidos duo M1021 Manual de usuario

Vimar

Vimar ELVOX 7539/E Manual de usuario

SSS Siedle

SSS Siedle BTSV 850-03 Manual de usuario

Dahua

Dahua VTO Series Manual de usuario

Elvox

Elvox 5651 Manual de usuario

Videx

Videx VIDEOKIT Series Manual de usuario

Rocom

Rocom Doortello Business FW T2.05W2.04 Manual de usuario

Viking

Viking E-35-EWP Manual de usuario

Safeguard Supply

Safeguard Supply LRA-EX1000 Manual de usuario

SSS Siedle

SSS Siedle BFCV 850 Series Manual de usuario

GRD

GRD MAX V2 Manual de usuario

Alecto

Alecto ADI-250 Manual de usuario

Aiphone

Aiphone IE-8MD Manual de usuario

Perel

Perel EDB4 Manual de usuario