Mio MOOV 300-Series Manual de usuario
User Manual
Moov 200-Series
Moov 300-Series
R01(USA)
Trademarks
All brand and product names are trademarks or registered trademarks of their respective companies.
Disclaimer
Specifications and documents are subject to change without notice. Mio Technology does not warrant this
document is error-free. Mio Technology assumes no liability for damage incurred directly or indirectly from
errors, omissions, or discrepancies between the device and the documents.
Notes
Not all models are available in all regions.
Depending upon the specific model purchased, the color and look of your model may not exactly match the
graphics shown in this document.
The screenshots and other presentations shown in this document are for reference only. They may differ from
the actual screens and presentations generated by the actual product.
This manual provides information on the
hardware and non-navigation features. For
navigation software information, please
refer to the other manual.
1
Table of Contents
Getting to know your Mio ................................................................................................................................ 2
Moov 200-Series............................................................................................................................................ 2
Moov 300-Series............................................................................................................................................3
Performing the initial start-up .........................................................................................................................4
Charging the battery via the USB cable ......................................................................................................... 5
Using your Mio in a vehicle...............................................................................................................................6
Mounting Moov 200-Series in a vehicle....................................................................................................6
Mounting Moov 300-Series in a vehicle....................................................................................................6
Connecting the TMC antenna (select models only)................................................................................ 7
Operating basics.................................................................................................................................................8
Turning on and off .........................................................................................................................................8
Shutdown and hardware reset ....................................................................................................................8
Navigating on the screen .............................................................................................................................8
Reference .............................................................................................................................................................9
Inserting a memory card ..............................................................................................................................9
Troubleshooting.............................................................................................................................................9
Caring for your Mio ..................................................................................................................................... 10
Regulatory information....................................................................................................................................11
Regulations statements...............................................................................................................................11
Federal Communications Commission (FCC) statement .................................................................11
Canada .......................................................................................................................................................11
Safety precautions....................................................................................................................................... 12
About charging ........................................................................................................................................ 12
About the charger................................................................................................................................... 12
About the battery ................................................................................................................................... 12
2
Getting to know your Mio
Moov 200-Series
Name Description
nPower switch Turns your Mio on and off.
oMemory card slot (Select models only)
Accepts a SD (Secure Digital), SDHC (Secure Digital High Capacity), or MMC (MultiMediaCard)
card for accessing data such as additional maps.
pCharge indicator Indicates the level of battery charge:
Green - battery full
Amber - battery charging.
qMini-USB
connector
Connects to the charger or USB cable.
rTMC connector (Select models only)
Connects to the TMC antenna for receiving traffic information.
sHolder socket For the holder.
tSpeaker Sends out sounds and voice.
3
Moov 300-Series
Name Description
nPower switch Turns your Mio on and off.
oMemory card slot (Select models only)
Accepts a SD (Secure Digital), SDHC (Secure Digital High Capacity), or MMC (MultiMediaCard)
card for accessing data such as additional maps.
pCharge indicator Indicates the level of battery charge:
Green - battery full
Amber - battery charging.
qMini-USB
connector
Connects to the charger or USB cable.
rHolder socket For the holder.
sSpeaker Sends out sounds and voice.
tTMC connector (Select models only)
Connects to the TMC antenna for receiving traffic information.
4
Performing the initial start-up
1. For the initial start-up, slide the power switch to the ON position.
Moov 200-Series Moov 300-Series
2. Your Mio turns on.
Note: The battery may not be fully charged when you use your Mio for the first time. To charge the battery, see the next
section.
3. Follow the prompts. During the start-up process, you can select your preferred language, read the warning
message, and view the tutorial.
Note: To prevent the language selection screen and tutorial from displaying again on the next start-up, clear the check
box on the screen.
4. The map screen will display. You can now use your Mio.
5
Charging the battery via the USB cable
If you intend to charge your Mio in this way, turn off your Mio so that it takes less time to charge the battery.
1. Turn on the computer.
2. Connect the mini-USB end of the USB cable to the bottom of your Mio and the other end to a USB port on
your computer.
Moov 200-Series Moov 300-Series
3. The charge indicator glows amber when charging is in progress. When the battery is fully charged, the
indicator turns green.
Note: If your Mio is on when connected to a computer, a screen appears to prevent you from using your Mio.
Note: When the Mio is connected to a computer, it is recognized as an external mass storage device. Do not delete any files
pre-installed in the Mio. Deleting files of which the function is unknown can cause programs or features to malfunction.
CAUTION: For optimal performance of the lithium battery:
Do not charge the battery where the temperature is high (e.g. in direct sunlight).
There is no need to fully discharge the battery before charging.You can charge the battery before it is discharged.
When storing the product for a long period of time, be sure to fully charge the battery at least once every two weeks.
Over discharge of the battery can affect the charging performance.
6
Using your Mio in a vehicle
CAUTION:
Select an appropriate location for mounting the Mio in a vehicle. Never place the Mio where the driver’s field of vision
is blocked.
Notice to all drivers: Certain states prohibit the installation of product on a vehicle’s windshield. Those that are known
as of the release date of this product are listed below; however, please make sure that you are in compliance with your
state’s most recent law before installing this product. Mio Technology is not responsible for any damages, penalties, or
fines that may occur as a result of illegal installation.
Notice to customers driving in California and Minnesota: Use the dashboard mount option when installing this
product, as state law prohibits the installation of products on vehicle windshields. Refer to California Vehicle Code
26708, and Minnesota Statutes 169.71 for details.
If the car’s windscreen is tinted with a reflective coating, it may be athermic and impact the GPS reception. In this
instance, please mount your Mio where there is a “clear area.”
To protect your Mio against sudden surges in current, connect the car charger only after the car engine has been
started.
Mounting Moov 200-Series in a vehicle
Mounting Moov 300-Series in a vehicle
1 23
4 5
1 23
7
Connecting the TMC antenna (select models only)
If you Mio has the TMC connector, attach the antenna to your Mio in order to receive real-time driving traffic
information.
CAUTION: Keep the antenna cord fairly straight (not curled or bent) for best reception.
Moov 200-Series Moov 300-Series
TMC information is monitored by the navigation software. Once the information is received, you can view it on
your device and traffic icons will appear in the map view. Certain roads with reported traffic will be highlighted
and you can choose to avoid those roads and an alternate route will be automatically calculated. (See the
navigation software manual for detailed information.)
4 5
8
Operating basics
Turning on and off
For normal operation, turn off your Mio by sliding the power switch to the OFF position. Your Mio enters a
suspended state. To use it again, slide the power switch to the ON position. Your Mio will be back to where you
left off.
Moov 200-Series Moov 300-Series
Shutdown and hardware reset
Occasionally, you may need to perform a hardware reset when your Mio stops responding; or appears to be
“frozen” or “locked-up.”
You can perform a hardware reset by shutting down your Mio and then turning it back on. To shut down your
Mio, slide the power switch to the RESET position. To turn on your Mio after shutting it down, slide the power
switch to the ON position.
Navigating on the screen
To operate your Mio, touch the screen with your fingertip. You can perform the following actions:
Moov 200-Series Moov 300-Series
Tap
Touch the screen once with your fingertip to open items or select onscreen buttons or options.
Drag
Hold your fingertip on the screen and drag up/down/left/right or across the screen. (This is not supported
by all applications.)
Tap and hold
Tap and hold your fingertip until an action is complete, or a result or menu is shown. (This is not supported
by all applications.)
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Sistema de navegación para automóviles de Mio
Mio
Mio Combo 5207 LM Series Manual de usuario
Mio
Mio C728 Manual de usuario
Mio
Mio DigiWalker C320 Manual de usuario
Mio
Mio SPIRIT 380 series Manual de usuario
Mio
Mio DigiWalker C320 Manual de usuario
Mio
Mio Moov M410 Series Instrucciones de uso
Mio
Mio Moov M410 Series Instrucciones de uso
Mio
Mio MOOV 200-Series Manual de usuario
Mio
Mio Digiwalker C710 Manual de usuario
Mio
Mio F360 Series Instrucciones de uso
