Migma MigmaDVR Manual de usuario



MigmaDVRTM

Version 1.5

UserGuide

November 2009

MigmaDVR™ User Guide (Version 1.5)

Contacts

http://www.migmasys.com/MigmaDVR.html Web

@[email protected]

[email protected]

Technical support and general

information

Sales

508-660-0328

Phone

508-660-0288 Fax

Migma Systems, Inc.

1600 Providence Highway

Walpole, MA 02081

Mail

Information in this document is subject to change without notice. Companies, names and data used in

examples herein are fictitious unless otherwise noted. Migma Systems, Inc. does not endorse or approve

the use of any of the product names or trademarks appearing in this document.

Permission is granted to copy this document, at no charge and in its entirety, provided that the copies are

not used for commercial advantage, that the source is cited and that the present copyright notice is included

in all copies, so that the recipients of such copies are equally bound to abide by the present conditions. Prior

written permission is required for any commercial use of this document, in completely or in part, and for

any partial reproduction of the contents of this document exceeding 50 lines of up to 80 characters, or

equivalent. The title page, table of contents and index, if any, are not considered to be part of the document

for the purposes of this copyright notice, and can be freely removed if present.

The purpose of this copyright is to protect your right to make free copies of this manual for your friends

and colleagues, to prevent publishers from using it for commercial advantage, and to prevent ill-meaning

people from altering the meaning of the document by changing or removing a few paragraphs.

MigmaDVR™ User Guide (Version 1.5)

Table of Contents

Contacts .............................................................................................................................ii

Table of Contents.............................................................................................................iii

1About MigmaDVRTM .............................................................................................1-1

2Package Information..............................................................................................2-1

2.1 Hardware.........................................................................................................................................2-1

2.2 Software...........................................................................................................................................2-1

3Hardware Installation............................................................................................3-1

3.1 IR LED Camera Installation .........................................................................................................3-1

3.2 Video Capture Card Installation...................................................................................................3-1

3.3 Video Cable Wiring........................................................................................................................3-1

4Software Installation.............................................................................................4-1

4.1 Windows XP Setup.........................................................................................................................4-1

4.2 Windows Vista Setup......................................................................................................................4-3

4.3 Windows 7 Setup.............................................................................................................................4-5

5Starting MigmaDVRTM..........................................................................................5-1

6Video Camera Configuration................................................................................6-1

7IP Cameras..............................................................................................................7-1

8Video Analytical Cueing........................................................................................8-1

8.1 Detection Zone Configuration .......................................................................................................8-1

8.2 Detection Sensitivity .......................................................................................................................8-2

8.3 Daily Email Notification.................................................................................................................8-2

9Image View..............................................................................................................9-1

10 Network Streaming ..............................................................................................10-1

11 Viewing Saved Video Files...................................................................................11-1

MigmaDVR™ User Guide (Version 1.5)

iii

1About MigmaDVRTM

MigmaDVRTM is a security surveillance system using up to eight high-resolution IR LED

surveillance cameras and one desktop computer. It consists of MigmaDVRTM

surveillance software, indoor/outdoor IR LED cameras, and multi-channel video capture

card. Video cable and desktop computer are not included.

MigmaDVRTM can support up to eight surveillance cameras, operating in near real-time

(10 fps for each camera). It also supports the synchronous video compression and

network connectivity over Internet. With the sophisticated analytical video cueing

technologies, video images are recorded only when the objects of interest are detected,

making it possible to store over one year worth of detection images in a typical desktop

computer hard drive, instead of three months as most commercial DVR systems do. With

add-on tools, MigmaDVRTM can perform the intelligent search over all stored detection

videos and condense the search results in one unified video file. MigmaDVRTM can

operate without any user interactions, 24/7. It is an ideal surveillance system for banks,

office buildings, shopping malls, hospitals, schools, etc.

MigmaDVR™ User Guide (Version 1.5)

1-1

2Package Information

The MigmaDVRTM is made of both hardware components and software program. In this

section, we will describe each component in the package.

2.1 Hardware

(1) Indoor/outdoor high-resolution IR LED cameras (up to 8)

(2) High quality eight-channel video capture card (1)

To make MigmaDVRTM operational, the user is expected to have video cables and related

connectors together with a typical desktop computer. It is recommended that RG-59

video cable and its connectors should be used.

A desktop computer is required to host the surveillance software application and a

monitor (optional), if desired, could be used to view the live images. For the desktop

computer, the minimum requirement is 2.66 GHz dual-core CPU, 2GB of RAM,

Windows 7, Windows Vista or XP. The minimum screen resolution of monitor should be

1152×864 pixels. MigmaDVRTM can operate without any monitor.

2.2 Software

The MigmaDVRTM software application, device drivers and this User Guide are included

in MigmaDVRTM installation CD.

MigmaDVR™ User Guide (Version 1.5)

2-1

3Hardware Installation

3.1 IR LED Camera Installation

The user should first mount the IR LED cameras at the desired places. Depending on the

security monitoring purpose, the cameras can be installed either indoor or outdoor.

3.2 Video Capture Card Installation

The user needs to first install the eight-channel video capture card (included) in the

desktop computer. Please follow the following steps for its installation.

1. Shut down the computer

2. Unplug the power cord

3. Disconnect all the connected devices (if any)

4. Open the computer enclosure

5. Select one of the free PCI card slots (see Figure 3-1 for reference)

6. Firmly insert the video capture card to one free PCI slot and secure it (see Figure

3-2 for reference)

7. Close the computer enclosure

8. Connect all the devices previously connected to the computer

9. Plug in the power cord

10. Follow “Driver Installation” in Section 4 to install the drivers.

Figure 3-1: Free PCI slots. Figure 3-2: Firmly insert video capture card.

3.3 Video Cable Wiring

After mounting the cameras using brackets (included), the user needs to connect all of the

cameras to the 8-channel video capture card installed on the desktop computer. The user

must connect all of the cameras with their power adapters (included).

MigmaDVR™ User Guide (Version 1.5)

3-1

4Software Installation

In this section, we describe how to install MigmaDVRTM software in Windows XP,

Windows Vista and Windows 7.

4.1 Windows XP Setup

4.1.1 Video Capture Card Driver Installation

If it is the first time installing the video capture card to the computer, the user needs to

install its drivers. Before installing the drivers, the video capture card must be installed in

the desktop computer (complete “Video Capture Card Installation” in Section 3). Then

follow the following steps to install the driver.

1. Turn on the computer. Once the computer is on, the “Found New Hardware

Wizard” dialog will appear.

Figure 4-1: New hardware found.

2. Insert the MigmaDVRTM installation CD into CD-ROM or DVD drive. The

setup program will automatically start. However, at this point, the user should

choose to exit MigmaDVRTM setup program to allow drivers to be installed first.

3. Choose “Install the software automatically (Recommended)” and click

“Next” on the “Found New Hardware Wizard” dialog box.

4. Click “Continue Anyway”.

MigmaDVR™ User Guide (Version 1.5)

4-1

Figure 4-2: Driver installation window.

5. Click “Finish” to complete the installation.

6. Since the video capture card has 8 channels and each channel needs 4 different

drivers, after one driver is installed, the “Welcome to Found New Hardware

Wizard” dialog will appear again. The user must repeat Steps 3 – 5 multiple

times until all of the required drivers are installed successfully.

7. Once all of the drivers are installed, the “Found New Hardware Wizard”

dialog will no longer appear again. The “Device Manager” panel (Start Æ

Settings ÆControl Panel ÆSystem ÆHardware ÆDevice Manager) can

be used to see all drivers installed (see Figure 4-3 for reference).

Figure 4-3: Device manager window.

4.1.2 MigmaDVRTM Software Installation

Insert MigmaDVRTM installation CD into CD-ROM or DVD drive. The setup program

will automatically start. If not, please go to the CD-ROM or DVD drive directory and

double-click on “setup.exe”. Follow the steps shown subsequently and finish the

installation.

4.1.3 MigmaDVRTM Software Uninstallation\Reinstallation

MigmaDVR™ User Guide (Version 1.5)

4-2

If the user needs to uninstall MigmaDVRTM software, please go to Start ÆSettings Æ

Control Panel ÆAdd or Remove Programs, select “MigmaDVR” and click

“Remove”. Although Windows uninstallation program will not remove the saved

surveillance video files, user is strongly recommended to backup the data to a safe place

before uninstalling MigmaDVRTM.If the user prefers to reinstall the MigmaDVRTM

software, all of the surveillance video files stored previously (if not deleted manually)

will remain in the same folders.

4.2 Windows Vista Setup

4.2.1 Driver Installation

If it is the first time installing the video capture card to the computer, the user needs to

install its drivers. Before installing the drivers, the video capture card must be installed in

the computer (please complete “Video Capture Card Installation” in Section 3). Then

follow the following steps.

1. Turn on the computer. Once the computer is on, the “Found New Hardware”

dialog will appear (see Figure 4-4 for reference).

Figure 4-4: New hardware is found.

2. Insert MigmaDVRTM installation CD into CD-ROM or DVD drive. The setup

program will automatically start. However, at this point, the user should choose

to exit MigmaDVRTM setup program to allow drivers to be installed first.

3. Click “Locate and install driver software (recommended)”, the “Found New

Hardware – Multimedia Video Controller” will appear. The user can also

click “Driver Software Installation” icon in the system tray to see the

installation status, as shown in Figure 4-5. Then Click “Next”.

MigmaDVR™ User Guide (Version 1.5)

4-3

Figure 4-5: Installation status. Figure 4-6: Installation driver.

4. Click “Install this software anyway”, as shown in Figure 4-6 above.

5. When the installation is finished, click “Close”, as shown in Figure 4-7 for

reference. At this point, Windows Vista will automatically install the rest of the

Multimedia Video Controller drivers. The user can check the status in the

“Driver Software Installation” window.

Figure 4-7: Finish driver installation. Figure 4-8: New device is found.

6. After a short period, the “Found New Hardware – Unknown Device” dialog

box will appear, as shown in Figure 4-8 above. Click “Browse my computer

for driver software (advanced)”. Browse to the CD-ROM or DVD drive

directory, and then click “Next”, as shown in Figure 4-9.

Figure 4-9: Browse drives. Figure 4-10: Finish driver installation.

7. Click “Install this software anyway”. Then click “Close”, as shown in Figure

4-10 above.

8. At this point, the “Found New Hardware – Unknown Device” dialog box will

appear one more time. Follow Steps 6-7 to finish.

9. Once all of the drivers are installed, “Driver Software Installation” window

will appear, as shown in Figure 4-11 for reference. The “Device Manager”

MigmaDVR™ User Guide (Version 1.5)

4-4

Tabla de contenidos

Manuales populares de Sistema de seguridad de otras marcas

Inner Range

Inner Range Concept 2000 Manual de usuario

Climax

Climax Mobile Lite R32 Instrucciones de montaje

CADDX

CADDX NX-6 Manual de usuario

FBII

FBII XL-31 Series Manual de usuario

Johnson Controls

Johnson Controls PENN Connected PC10 Manual de usuario

Aeotec

Aeotec Siren Gen5 Manual de usuario

Blaupunkt

Blaupunkt SA 2700 Manual de usuario

IDEAL

IDEAL Accenta Manual del propietario

AJAX

AJAX DoubleButton Manual de usuario

Swann

Swann SW-P-MC2 Manual de usuario

Ecolink

Ecolink Siren+Chime Manual de usuario

Digital Monitoring Products

Digital Monitoring Products XR150 Manual de usuario

EDM

EDM Solution 6+6 Wireless-AE Manual de usuario

Highway Safety Group

Highway Safety Group EA401 Manual de usuario

Siren

Siren LED GSM Manual de usuario

Detection Systems

Detection Systems 7090i Instrucciones de montaje

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manual de usuario

Siemens

Siemens FDM273 Manual de usuario