Microtronics MyDatalogNANOamr Manual de usuario

Manual for the portable device

myDatalogNANOamr

Rev. 01 valid from:

lFirmware version: 03v005

lModem version: 03v005

lServer version: 38.1

lHardware version: 1.1

User manual

300436

Microtronics Engineering GmbH | www.microtronics.at

Hauptstrasse 7 | 3244 Ruprechtshofen | Austria

Tel +43 2756 77180 23 | Fax +43 2756 77180 33 | support@microtronics.at

Chapter 1 Table of contents
Chapter 1 Table of contents
Manual for the portable device myDatalogNANOamr 1
Chapter 1 Table of contents 3
Chapter 2 Declaration of conformity 9
Chapter 3 Technical data 11
Chapter 4 General specifications 13
4.1 Translation 13
4.2 Copyright 13
4.3 General descriptive names 13
4.4 Safety instructions 13
4.4.1 Use of the hazard warnings 14
4.4.2 Safety and preventative measures for handling GSM/GPRS modems 14
4.4.2.1 Safety and precautionary measures for the GSM/GPRS modem installation 14
4.4.2.2 Safety measures for installing the antenna 15
4.5 Overview 16
4.6 Intended use 16
4.7 General product information 17
4.8 Device labelling 17
4.9 Installation of replacement and wear parts 18
4.10 Storage of the product 18
4.11 Obligation of the operator 18
Chapter 5 Functioning principle 21
5.1 ALOHA transmission mode 23
5.2 Selection of the GSM network 23
5.2.1 Ban list 24
Chapter 6 Storage, delivery and transport 25
6.1 Inspection of incoming deliveries 25
6.2 Scope of supply 25
6.3 Storage 25
Rev. 01 3

4 Transportation 25
5 Return 26
Chapter 7 Installation 27
1 Dimensions 27
2 Installing the myDatalogNANOamr 27
2.1 Wall mounting 28
2.2 Top-hat rail assembly 29
2.3 Pipe assembly 31
3 Safety instructions for the cabling 32
3.1 Information on preventing electrostatic discharges (ESD) 32
4 Electrical installation 32
4.1 Connecting the meters 33
4.1.1 Connection examples 34
4.1.1.1 Elster T-probe 34
4.1.1.2 Sensus MS8100 35
4.2 Connection of the GSM antenna 35
4.3 Optimum antenna positioning for assembly in a shaft 36
4.3.1 Influences on the signal quality 36
4.3.2 Possibilities for improving the signal quality 37
4.3.3 Procedure for determining the optimum position of the antenna 37
4.4 Technical details about the meter inputs 37
4.5 Technical details about the device operating time 38
Chapter 8 Initial Start-Up 41
1 User information 41
2 General principles 41
3 Placing the system into operation 41
4 Testing communication with the device 43
Chapter 9 User interfaces 45
1 User interface on the myDatalogNANOamr 45
1.1 Operating elements 45
4Rev. 01

Chapter 1 Table of contents

9.1.1.1 Solenoid switch 45

9.1.1.2 Status LED 46

9.2 User interface on the myDataweb-Server 47

9.2.1 Site configuration 47

9.2.1.1 Site 47

9.2.1.2 Comments 47

9.2.1.3 Measurement channels 48

9.2.1.3.1 Basis 48

9.2.1.3.2 Config 49

9.2.1.4 Calculated channels 50

9.2.1.4.1 Basis 50

9.2.1.4.2 Calculation 51

9.2.1.4.3 Alarm 52

9.2.1.5 Internal channels 52

9.2.1.5.1 Basis 52

9.2.1.6 Alarm settings 52

9.2.1.7 Basic setting 53

9.2.1.8 FTP export settings 53

9.2.2 Device configuration 54

9.2.2.1 Comments 54

9.2.2.2 Measurement instrument 54

9.2.2.3 Device-specific settings 55

9.2.2.4 GPRS 56

Chapter 10 myDataweb server 57

10.1 Overview 57

10.1.1 Explanation of the symbols 57

10.2 "Customer" area 58

10.3 "Site" area at customer level 59

10.3.1 Reports 59

10.4 Recommended procedure 60

Rev. 01 5

4.1 Creating the site 60
4.2 Assigning a device to the customer 61
Chapter 11 WebApp 65
1 General 65
2 Creating a "Direct login" 65
2.1 iOS (iPhone) 67
2.2 Android2.2 68
3 List of sites 69
3.1 Determining the position of the site 70
4 Site info screen 71
4.1 Editing a comment 71
4.2 Configuring the measurement channels 72
4.2.1 User level1 73
4.2.2 User level2 74
Chapter 12 XML interface 75
1 General 75
2 Structure of the database 75
2.1 Generally applicable table identifiers 76
2.1.1 mydatalognanoamrid 76
2.1.2 geraetid 83
2.1.3 bookingline (read only) 85
2.1.4 kundeid 85
2.2 Device-specific table identifier 87
2.2.1 mydatalognanoamr_data 87
2.2.2 mydatalognanoamr_channel 88
2.2.3 mydatalognanoamr_log 89
2.2.4 mydatalognanoamr_user1 89
2.2.5 mydatalognanoamr_state 91
2.2.6 mydatalognanoamr_aloha 91
2.2.7 mydatalognanoamr_pos 91
6Rev. 01

Chapter 1 Table of contents
2.2.8 mydatalognanoamr_set 92
3 XML export 93
3.1 Configuration of a HTTP-GET command 93
3.1.1 Syntax of the xPath query 94
3.1.1.1 List of the fields in a table 94
3.1.1.2 List of site types 94
3.1.1.3 Filter conditions 94
3.1.1.3.1 Example: 95
3.1.1.4 Fields 96
3.1.1.4.1 Example 96
3.1.1.5 Data retrieval including index specifications 97
3.1.1.5.1 Example 97
3.1.2 Data record compression 99
3.1.3 Updating data fields 100
3.1.3.1 Example 100
3.2 Format of the XML result 101
3.2.1 Example: 102
4 XML import 102
4.1 Transferring data to the myDataweb server 102
4.2 Configuration of a HTTP-POST command 103
4.3 Structure of the XML file 104
4.3.1 Changing existing data 104
4.3.2 Importing data 104
Chapter 13 Maintenance 107
1 General maintenance 107
2 Replacing the battery pack 107
Chapter 14 Removal/disposal 111
Chapter 15 Troubleshooting and repair 113
1 General problems 113
2 Log entries and error codes 114
Rev. 01 7

15.2.1 Modem error 117
15.3 Evaluating the device log 120
15.3.1 Evaluating the device log on the myDataweb server 120
15.3.2 Evaluating the device log using myDatanetDeviceConfig 120
Chapter 16 Spare parts and accessories 121
16.1 Assembly sets 121
16.2 Antennas 121
16.3 Battery packs 121
16.4 Other accessories 121
Chapter 17 Document history 123
Chapter 18 Contact information 125
8Rev. 01