Microsens MS657208PX Manual de usuario

User Manual –Entry Line

Industrial Gigabit Ethernet Switch

8x 10/100/1000Base-T with PoE+

Gigabit Ethernet Switch with PoE+ for Industrial Use Page 2/11

Table of Contents

General ................................................................................................................................ 3

Benefits................................................................................................................................ 3

Front View........................................................................................................................... 4

LED Display......................................................................................................................... 4

Dimensional Drawings....................................................................................................... 5

Mounting ............................................................................................................................. 6

Power Supply / Alarm Contact ........................................................................................ 8

Twisted Pair Connections.................................................................................................. 8

Technical Specifications .................................................................................................... 9

Standard Compliance .......................................................................................................10

Safety Notes ......................................................................................................................10

Order Information.............................................................................................................11

Accessories ........................................................................................................................11

Gigabit Ethernet Switch with PoE+ for Industrial Use Page 3/11

General

The IP protocol has already left the in-house environment and is going to take all

remaining communication areas. Industrial Ethernet already is an established

idea, describing the reliable use of Ethernet components in harsh environments.

Because of the large number of these applications, the market requires simple

and also reliable and cost effective products. With the new Industrial Ethernet

Entry Line MICROSENS fulfils these requirements. The products are very compact

and include:

•5 and 8 port Fast Ethernet switches

•6 and 8 Port Gigabit Ethernet switches

•Switches with fiber-uplink

•Media converter for Fast Ethernet and Gigabit Ethernet

•Device Server for the conversion of serial interfaces

(RS-232/422/485) to IP.

All new devices distinguish themselves with easy handling (plug & play) and do

not need extensive configuration. New developments are focusing on increasing

the port numbers and further implementation of Gigabit Ethernet.

Benefits

System Interface/Performance

8x10/100/1000Base-T PoE+ (PSE) ports

Supports PSE based on IEEE 802.3af and IEEE 802.3at standards

up to 30 Watts per port

Supports auto-negotiation and auto-MDI/MDI-X

Supports store-and-forward architecture

Non-blocking data transmission

Supports 9 kB Jumbo Frames

Back-plane (Switching Fabric): 16 Gbps

1 MB Packet Buffer

8K MAC Address Table

Alarm output relay for power failures

Power Supply

12..56 VDC Redundant Dual Power Input

44..56 VDC for PoE operation

Overload current protection

Reverse polarity protection

Chassis/Installation

IP-30 Protection

DIN-rail and Wall Mount Design

Gigabit Ethernet Switch with PoE+ for Industrial Use Page 4/11

Front View

LED Display

There are diagnostic LED indicators located on the front panel of the industrial

switch. They provide real-time information of system and operational status. The

following table provides description of the LED status and their meanings for the

switch.

LED

Color

Status

Meaning

Green

Power 1 is active

Off

Power 1 is inactive

Green

Power 2 is active

Off

Power 2 is inactive

RLY

(Relay)

Amber

Power failure (Relay status) P1 or P2 off

Off

No failure

Port 1-8

(Lnk/Act)

Green

Valid link established

Off

No link established

Flashing

The port is transmitting or receiving data

packets

Port 1-8

(PoE)

Amber

POE End Device is detected

Off

No POE End Device detected

Gigabit Ethernet Switch with PoE+ for Industrial Use Page 5/11

Dimensional Drawings

Dimensional Drawing

Gigabit Ethernet Switch with PoE+ for Industrial Use Page 6/11

Mounting

The industrial switch supports two mounting methods: Wall & DIN-rail.

DIN-Rail Mounting

You can also mount industrial switch on a standard DIN-rail by below steps.

The DIN-rail kit is screwed on the industrial switch at delivery. If the DIN-rail kit

is not screwed on the industrial switch, please screw it on the switch first.

1. First, hang the industrial switch to the DIN-rail with angle of inclination.

Installation to DIN-rail (Step 1)

2. Then, lightly push the DIN-rail into the track.

Installation to DIN-rail (Step 2)

3. Check if the DIN-rail is tightened on the track or not.

4. To remove the industrial switch from the track, reverse steps above.

Gigabit Ethernet Switch with PoE+ for Industrial Use Page 7/11

Wall mounting

The industrial switch can be wall-mounted by using the included mounting kit.

1. First, use the screws included in the package to combine the industrial

switch and metal mounting kit and remove the DIN-rail adapter.

2. Then fix the switch with some screws to the wall.

Wall mounting brackets

Gigabit Ethernet Switch with PoE+ for Industrial Use Page 8/11

Power Supply / Alarm Contact

The power supply is done by an external power supply with an output voltage of

9..56 VDC (44..56 VDC for PoE operation). This power supply is not included at

delivery, but can be ordered separately (e.g. MS700455). The connection is done

by the pluggable screw terminals on the top of the device. The connection of a

redundant power supply can be done by the second screw terminal. Connect

positive wire to P+, negative wire to P-, also connect grounding/ earth wire to

the grounding screw.

Pin out Power Connector and Alarm Contact

WARNING: Any exceeded input voltage will not make this unit function

and may damage this unit!

Warning: Always ground the power source to maintain a clean power

input.

The status of the alarm relay (RLY) contact depends on the power inputs P1 and

P2:

Input power condition

Relay status

Power 1 and 2 connected

Relay open

Power 1 or 2 fails

Relay closed

No power connected

Relay open

Alarm Relay functionality

Twisted Pair Connections

The integrated auto-crossing function of all twisted pair ports makes the use of

crossed patch cables unnecessary. The switch automatically detects the pinout of

the connected cable and adapts the port accordingly. For all connections standard

1:1 twisted pair cables can be used.

The Auto-negotiation mechanism detects automatically the speed and

transmission mode (full or half duplex) between connected ports. A manual

configuration is not required.

Gigabit Ethernet Switch with PoE+ for Industrial Use Page 9/11

Technical Specifications

Type Gigabit Ethernet PoE+ Switch 8x 10/100/1000Base-T

with PoE+

Cable type Unshielded/shielded twisted pair cable, 100 Ohm,

min. category 5e

Data rate 10, 100 or 1000 Mbps

Power-over-Ethernet PoE+ up to 30 W per port according IEEE802.3af/at

LED displays Power 1/2 (green)

Alarm relay status (amber)

Per TX Port: (link / activity)

PoE (PoE injected: amber)

Mounting 35 mm top-hat rail, according DIN EN 50 022 optional

wall mounting set

Power supply 12..56 VDC (44..56 VDC for PoE operation),

connections with screw terminals, redundant ports,

Power / relay wiring Wire range: 0.34 mm² to 2.5 mm²

Solid wire (AWG):12-24 / 14-22

Stranded wire (AWG): 12-24 / 14-22

Torque:5 lb-In / 0.5 Nm / 0.56 Nm

Wire Strip length: 7-8 mm

Power consumption Typ. 5.8 W @ 48 VDC (full load without PoE devices)

Alarm relay 1 A / 24 V max.

Dimensions 36.2 x 105 x 142 mm (w x d x h)

Operating temp. -40° C to 75° C

Storage temp. -40° C to 85° C

Rel. humidity 5% to 95% non-condensing

EMI EN 55022 class A

EMS EN 61000-4-2 (ESD), EN 61000-4-3 (RS),

EN 61000-4-4 (EFT), EN 61000-4-5 (Surge),

EN 61000-4-6 (CS), EN 61000-4-8, EN 61000-4-11

Shock EN 60068-2-27

Free fall EN 60068-2-32

Vibration EN 60068-2-6

Safety EN 60950-1

Gigabit Ethernet Switch with PoE+ for Industrial Use Page 10/11

CE 2014/30/EU EMC Directive

2011/65/EU RoHS Directive

Standard Compliance

IEEE Standards

IEEE 802.3 10Base-T Ethernet

IEEE 802.3u 100Base-TX Fast Ethernet

IEEE 802.3ab 1000Base-T Gigabit Ethernet

IEEE 802.3z 1000Base-X Gigabit Ethernet

IEEE 802.3x Flow Control and Back Pressure

IEEE 802.3af for PoE (up to 15 Watts per port for PSE)

IEEE 802.3at for PoE+ (up to 30 Watts per port for PSE)

Safety Notes

DANGER: Conductive components of power and telecommunications networks

can carry dangerously high voltage.

To avoid electric shock:

Do not carry out installation or maintenance work during lightning storms.

All electric installations must be carried out in accordance with local

regulations.

Tabla de contenidos

Otros manuales de Cambiar de Microsens

Microsens

Microsens MS400991M Manual de usuario

Microsens

Microsens 10Base-TX Hoja de especificaciones

Microsens

Microsens MS453510 Manual de usuario

Microsens

Microsens MS650850M Guía del usuario

Microsens

Microsens MS450154PM-48 Manual de usuario

Microsens

Microsens MS453514M Manual de usuario

Microsens

Microsens MS400863M Manual de usuario

Microsens

Microsens MS400863M Manual de usuario

Microsens

Microsens MS453510M Manual de usuario

Microsens

Microsens MS415259M Manual de usuario

Microsens

Microsens MS453526M Manual de usuario

Microsens

Microsens MS400870M Series Manual de usuario

Microsens

Microsens MS453490M Manual de usuario

Microsens

Microsens Profi Line Modular SERIES Manual de usuario

Microsens

Microsens MS653410MX Manual de usuario

Microsens

Microsens MS657033X Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario