MicroNet SP916GN Manual de usuario
User’s Manual
11N Wireless LAN Broadband Router
Model No.: SP916GN
http://www.micronet.info
Table of Contents
Chapter 1 Introduction................................................................................. 1
1.1 Package Contents..........................................................................................1
1.2 Key Features .................................................................................................1
1.3 Safety Information........................................................................................2
1.4 System Requirements....................................................................................3
1.5 Specifications................................................................................................3
Chapter 2 Tour of Product........................................................................... 5
2.1 Front Panel....................................................................................................5
2.2 Back Panel.....................................................................................................5
Chapter 3 Hardware and Network Setup.................................................... 7
3.1 Build Network Connection...........................................................................7
3.2 Connecting to Web-Based Management ......................................................8
3.2.1 IP Address Configuration.................................................................................8
3.2.2 Router’s IP Address........................................................................................13
3.2.3 Starting Web-Based Management UI..........................................................14
Chapter 4 Web-Based Management UI .................................................... 16
4.1 Quick Setup Wizard....................................................................................16
4.2 General Setup..............................................................................................24
4.2.1 System..............................................................................................................24
4.2.2 WAN..................................................................................................................27
4.2.3 LAN....................................................................................................................29
4.2.4 Wireless............................................................................................................32
4.2.5 QoS....................................................................................................................47
4.2.6 NAT....................................................................................................................50
4.2.7 Firewall..............................................................................................................55
4.3 Status...........................................................................................................62
4.3.1 System Information.........................................................................................62
4.3.2 Internet Connection Status............................................................................63
4.3.3 Device Status...................................................................................................63
4.3.4 System Log ......................................................................................................64
4.3.5 Security Log .....................................................................................................65
4.3.6 Active DHCP Client.........................................................................................66
4.3.7 Statistics............................................................................................................67
4.4 Configuration Backup and Restore.............................................................67
4.5 Firmware Upgrade......................................................................................68
4.6 System Reset...............................................................................................69
Chapter 5 Troubleshoot............................................................................. 70
Chapter 6 Glossary.................................................................................... 72
Chapter 1 Introduction
Micronet SP916GN, 11n Wireless Broadband Router, delivers next generation wireless
solution of high speed and cost-efficient network. The router allows multiple wireless
devices to share the single Internet connection via xDSL or Cable connection. It is a
simple step for medium-sized business to migrate to efficient and high performance
wireless network. The router is compliant with IEEE 802.11 Draft-N and backward
compatible with IEEE 802.11b/g. The router supports MIMO (Multi-In, Multi-Out)
technology, which uses 1T2R (1 transceiver, 2 receiver) to enhance data rate and
wireless coverage. In addition, the scope of the network can be easily expanded by
connecting the router to a hub or switch.
1.1 Package Contents
Prior to the installation of the device, please verify the following items are in the
package:
ySP916GN 11n WLAN Broadband Router
yQuick Installation Guide
yManual CD
yPower Adapter
Note: Contact your dealer immediately if any of the above items are missing,
damaged, or if the unit does not work.
1.2 Key Features
yHigh Internet Access throughput (Up to 150Mbps)
yAllow multiple users to share a single Internet line
ySupports up to 253 users
yAccess private LAN servers from the internet
yFour wired LAN ports (10/100M) and one WAN port (10/100M)
1
yProvides IEEE 802.11b/g/Draft-N wireless LAN capability
ySupport DHCP (Server/Client) for easy IP-address setup
yAdvanced network and security features like: Special Applications, DMZ, Virtual
Servers, Access Control, Firewall.
yAllow you to monitor the router’s status like: DHCP Client Log, System Log,
Security Log and Device/Connection Status
yEasy to use Web-based GUI for network configuration and management
purposes
yRemote management function allows configuration and upgrades from a remote
computer (over the Internet)
yAuto MDI / MDI-X function for all wired Ethernet ports.
1.3 Safety Information
In order to keep the safety of users, please follow the following safety instructions:
yThis router is designed for indoor use only.
yDo not put this router at or near hot or humid places. Also, do not leave this
router in the car in summer.
yDo not pull any connected cable with force and disconnect it from the router first.
yIf users want to place this router at high places, please make sure the router is
firmly secured. Falling from high places would damage the router and its
accessories, and in such cases, the warranty will be void.
yAccessories of this router, like antenna and power supply, are danger to small
children under 3 years old. They may put the small parts in their nose or month
and it could cause serious damage to them.
yThe router will become hot when being used for long time (This is normal and is
not a malfunction). Do not put this router on paper, cloth or other flammable
materials.
yThere’s no user-serviceable part inside the router. If users found the router is
not working properly, please contact the authorized dealer of purchase. Do not
disassemble the router, otherwise warranty will be void.
yIf the router falls into water when it’s powered on, do not use hands to pick it up.
Switch the electrical power off before doing anything, or contact an experienced
technician for help.
2
yIf users smell something strange, or even see some smoke coming out from the
router or power supply, remove the power supply or switch the electrical power
off immediately, and call authorized for help.
1.4 System Requirements
yInternet connection provided by xDSL or cable modem with a RJ-45 Ethernet
port.
yComputer or network devices with wired or wireless network interface card.
yWeb browsers (Microsoft Internet Explorer 4.0 or above, Netscape Navigator
4.7 or above, Opera web browser or Safari web browser).
yAC power socket (100 – 240V, 50/60Hz).
1.5 Specifications
Standards IEEE802.11b/ 802.11g / 802.11 Draft-N
Memory zFlash: 4MB
zSDRAM: 16MB
Interface zWAN Port: 1 x Port 10/100Mbps UTP
zLAN Ports: 4 x Port 10/100Mbps UTP
Antenna 2 x 3dBi Dipole Antenna
MIMO Technology 1T2R MIMO Technology
Transmit Power z11b: 18dBm
z11g: 15dBm
z11n: 15dBm
DHCP DHCP Server & Client
Advance Features zNAT/NAPT
zDMZ
zVirtual Servers
zDDNS
zVPN Pass-Through (IPSec, PPTP)
zAuto MDI/MDI-X for wired Ethernet ports
zSupports QoS (WMM, WMM-PS and WMM-SA)
Security Features zWEP (64/128 bit)
zWPA, WPA2 and WPA Radius
zAccess Control List (MAC Addresses)
zFirewall (Anit-DoS)
Status Log zDHCP Client Log
zSystem Log
zSecurity Log
zDevice/Connection Status
Management zWeb-based Interface
zRemote Management
3
Power 12 V DC, 1A Switching Power Adapter
Humidity 10-90% (Non-Condensing)
Temperature 10 ~ 40°C
Certification FCC, CE
4
Chapter 2 Tour of Product
2.1 Front Panel
LED Status Description
PWR On Router is switched on
On Wireless network or WPS mode is
switched on
Off Wireless network is switched off
WLAN
Flashing Wireless LAN activity (transferring
or receiving).
On WAN/LAN port (Internet) is running
at 100Mbps
Off WAN/LAN port (Internet) is running
at 10Mbps
WAN/LAN
10/100M
Flashing WAN/LAN activity (transferring or
receiving data)
On WAN/LAN port is connected
Off WAN/LAN port is not connected
WAN/LAN
LNK/ACT Flashing WAN/LAN activity (transferring or
receiving)
2.2 Back Panel
5
Parameter Description
Antenna Device contains two 3dBi dipole antennas.
DC12V/1A Power connector for connecting to power source.
Reset/WPS Press and hold this button for more than 10 seconds
to reset settings back to factory default. If button is
pressed for less than 5 seconds, WPS mode will be
initiated.
LAN 1~4 Local Area Network (LAN) ports for 1 to 4.
WAN Wide Area Network (WAN) for Internet connection.
6
Chapter 3 Hardware and Network
Setup
3.1 Build Network Connection
Please follow the following instruction to build the network connection between the
new wireless router and other network computers and devices:
Step 1. Connect the xDSL / cable modem to the WAN port of router by Ethernet
cable.
Step 2. Connect the LAN port to an active switch, router, hub or PC using an
Ethernet cable.
Step 3. Connect the 12V DC power adapter to an active outlet.
7
Tabla de contenidos
Otros manuales de Enrutador inalámbrico de MicroNet
MicroNet
MicroNet T18 Pro Manual de usuario
MicroNet
MicroNet SP916GK Manual de usuario
MicroNet
MicroNet SP3367A Manual de usuario
MicroNet
MicroNet T262-T21D Manual de usuario
MicroNet
MicroNet SP3366 Manual de usuario
MicroNet
MicroNet SP916NL Manual de usuario
MicroNet
MicroNet SP880B Manual de usuario
MicroNet
MicroNet SP916NL Manual de usuario
