4 MICRODIGITAL
PRECAUTIONS
• Do not install the camera
in extreme temperature
conditions.
Only use the camera under conditions where
temperatures are between -10°C and +50°C.
Be especially careful to provide ventilation
when operating under high temperatures.
• Do not install or use the cam-
era in an environment where
the humidity is high.
It can cause the image quality to be poor.
• Do not install the camera
under unstable lighting
conditions.
Severe lighting change or flicker can cause
the camera to work improperly.
• Do not touch the front lens of
the camera.
This is one of the most important parts of the
camera. Be careful not to leave fingerprints
on the lens cover.
• Do not drop the camera
and protect it from physical
shocks.
It can cause malfunctions to occur.
• Never keep the camera
pointed directly at strong
light.
It can damage the CCD.
• Do not expose the camera to
rain or spill beverage on it.
If it gets wet, wipe it dry immediately. Liquids
can contain minerals that corrode the
electronic components.
• Do not expose the camera to
radioactivity. If exposed to radioactivity the CCD will fail.
Ignoring this information may result
in material loss and/or serious
personal injuries including death.
Indicates “Never Allowed.”
Ignoring this information may
result in material loss and/or a
slight injuries.
Indicates “No Disas-
sembling.”
NOTE
•Exposure to a spotlight or an object emitting strong light may cause smear or blooming.
•
Ensure that the power source complies with normal specifications before supplying it to
the camera.
•Power supply.(Adaptor : DC12V)
- To avoid fire or shock hazard, must use a UL listed power supply.
•Monitor Impedance.
- Set the impedance switch to 75ohm standard position.
- When monitor is set to high impedance mode, the picture becomes blurred. In this
case, just check the position of the monitor impedance switch.
USER INFORMATION
