MicroDigial MDC-4 SERIES Manual de usuario
Ver.130111E
Design and specifications are subject to change without notice.
www.microdigital.co.kr
#1212, Hoseodae Venture Tower,
319, Gasan-Dong, Geumcheon-Gu, Seoul, Korea
Tel :+82-2-2627-5279 / Fax :+82-2-2627-5295
P/N : 3690-0002C
TOTAL SECURITY
G
SOLUTION
Supreme Resolution
Day & Night Color Camera
www.microdigital.co.kr
USER MANUAL
2 MICRODIGITAL
USER INFORMATION
CAUTION
RISK OF ELECTRIC SHOCK, DO NOT OPEN NO USER-SERVICEABLE PARTS INSIDE.
REFER FOR SERVICING TO QUALIFIED SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSISTING OF A
RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.
THIS EXCLAMATION POINT SYMBOL IS INTENDED TO ALERT THE USER
TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE
(SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE
APPLIANCE.
This marking on the product, accessories or literature indicates that the product
and its electronic accessories should not be disposed of with other household
waste at the end of their working life. To prevent possible harm to the environ-
ment or human health from uncontrolled waste disposal, please separate these
items from other types of waste and recycle them responsibly to promote the
sustainable reuse of material resources. Household users should contact either
the retailer where they purchased this product, or their local government office,
for details of where and how they can take these items for environmentally safe
recycling. Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product and its electronic accessories
should not be mixed with other commercial wastes for disposal.
CAUTION
MICRODIGITAL 3
• This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio com-
munications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required
to correct the interference at his own expense.
◆Information
USER INFORMATION
• Any changes or modifications in construction of this device which are
not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
• This installation should be made by a qualified service person and
should abide to all local codes.
◆Warning
4 MICRODIGITAL
PRECAUTIONS
• Do not install the camera
in extreme temperature
conditions.
Only use the camera under conditions where
temperatures are between -10°C and +50°C.
Be especially careful to provide ventilation
when operating under high temperatures.
• Do not install or use the cam-
era in an environment where
the humidity is high.
It can cause the image quality to be poor.
• Do not install the camera
under unstable lighting
conditions.
Severe lighting change or flicker can cause
the camera to work improperly.
• Do not touch the front lens of
the camera.
This is one of the most important parts of the
camera. Be careful not to leave fingerprints
on the lens cover.
• Do not drop the camera
and protect it from physical
shocks.
It can cause malfunctions to occur.
• Never keep the camera
pointed directly at strong
light.
It can damage the CCD.
• Do not expose the camera to
rain or spill beverage on it.
If it gets wet, wipe it dry immediately. Liquids
can contain minerals that corrode the
electronic components.
• Do not expose the camera to
radioactivity. If exposed to radioactivity the CCD will fail.
USER INFORMATION
MICRODIGITAL 5
Ignoring this information may result
in material loss and/or serious
personal injuries including death.
Indicates “Never Allowed.”
Ignoring this information may
result in material loss and/or a
slight injuries.
Indicates “No Disas-
sembling.”
USER INFORMATION
NOTE
•Exposure to a spotlight or an object emitting strong light may cause smear or blooming.
•
Ensure that the power source complies with normal specifications before supplying it to
the camera.
•Power supply.(Adaptor : DC12V)
- To avoid fire or shock hazard, must use a UL listed power supply.
•Monitor Impedance.
- Set the impedance switch to 75ohm standard position.
- When monitor is set to high impedance mode, the picture becomes blurred. In this
case, just check the position of the monitor impedance switch.
6 MICRODIGITAL
• DESCRIPTION 8 - 10
• SPECIFICATION 11 - 12
• FEATURES 13 - 14
• COMPONENTS 15 - 29
▪BOX CAMERA
▪BULLET CAMERA
▪DOME CAMERA
▪VANDAL CAMERA
15 - 17
18 - 24
25 - 27
28 - 29
• INSTALLATION 30 - 35
▪BOX CAMERA
▪BULLET CAMERA
▪DOME CAMERA
▪VANDAL CAMERA
30 - 31
32
33
34 - 35
• OSD OPERATION 36 - 42
▪BOX CAMERA
▪BULLET CAMERA
▪DOME CAMERA
▪VANDAL CAMERA
36 - 37
37 - 39
40
41
• INSTRUCTIONS 43
• OSD STRUCTURE 44
CONTENTS
MICRODIGITAL 7
CONTENTS
•LENS 45
• EXPOSURE 46 - 48
▪SHUTTER
▪AGC
▪SENS-UP
▪BLC
▪D-WDR
▪RETURN
46
46
47
47
48
48
• WHITE BALANCE 49 - 50
• DAY & NIGHT 51 - 52
• 3D DNR 53
• SPECIAL 54 - 59
▪CAM TITLE
▪D-EFFECT
▪RS-485
▪MOTION
▪PRIVACY
▪SYNC
▪LANGUAGE
▪DEFECT
54
55
56
56
58
59
59
59
• ADJUST 60
• RESET 61
• OSD STRUCTURE-MAIN MENU
8 MICRODIGITAL
Before operating the camera, confirm the camera model and proper input
power voltage. In order to help you understand this manual thoroughly,
we’ll introduce our model description.
◆MODEL DESCRIPTION
MDC - H8220 TDN - 30 HU
H 8 2 2 0
Built in Heater / UTC
Number of IR-LED
Day / Night
Filter mechanism
Power source
Number of Pixels
B/W(1) / Color(2)
Case type
Model type
• EX)
DESCRIPTION
MICRODIGITAL 9
DESCRIPTION
CASE TYPE MODEL
TYPE
COLOR PIXEL POWER D/N
LENS
IR/HEATER
/ CASE
1: MINI BULLET
2: MODULE
3: MINI SQUARE
4: BOX
5: ZOOM
6: IR BULLET
7: INDOOR
DOME
8: OUTDOOR
DOME
(VANDAL)
9: MINI VANDAL
i : IP
H : HD
1: B/W
2: COLOR
1: 270K
2: 520K
6: 1.3M
9: 2.1M
0: DC 12V
1: DUAL
VOLTAGE
(DC 12V/
AC24V)
2: AC230V
C
CTD
CDN
F
FDN
TDN
V
VX
VTD
VDN
WDN
F(E)
V(E)
IR : No. of
IR-LED
H: With Heater
U : UTC
CONTROL
MS : SUFACE
MOUNT TYPE
MF : FLUSH
MOUNT TYPE
IR & HEATER (MDC-6xxx, 7xxx, 8xxx MODEL)
-H -U
Built-in Heater UTC Remote Control
-30 -30H
Built-in IR LED
and CDS Sensor
Built-in IR LED
and CDS Sensor With Heater
Heater
Heater
IR
LED
IR
LED
10 MICRODIGITAL
PRECAUTIONS
DAY / NIGHT FILTER & MECHANISM
CDN
DIGITAL DAY / NIGHT
FDN
DIGITAL DAY / NIGHT
VDN
DIGITAL DAY / NIGHT
TDN
TRUE DAY / NIGHT (ICR-IR Cut Filter Removable)
POWER SOURCE
MDC-xxx0
- DC 12V
MDC-xxx1
- AC 24V / DC 12V, Dual-Power
MDC-xxx2
- AC 230V
DAY / NIGHT
DAY / NIGHT
DAY / NIGHT
LENS
Fixed
Fixed
DC Auto
Iris Lens
AC 230V
AC 24V
DC 12V
DC 12V
DAY / NIGHT
DC Auto
Iris Lens
FILTER CHANGE
LENS
VARIFOCALVARIFOCAL
LENS
VARIFOCALVARIFOCAL
DESCRIPTION
Este manual sirve para los siguientes modelos
3
Tabla de contenidos
