Microchip Technology TO220-5 Manual de usuario

TO220-5 / TO263-5

Voltage Regulator

Evaluation Board

User’s Guide

Information contained in this publication regarding device

applications and the like is provided only for your convenience

and may be superseded by updates. It is your responsibility to

ensure that your application meets with your specifications.

MICROCHIP MAKES NO REPRESENTATIONS OR

WARRANTIES OF ANY KIND WHETHER EXPRESS OR

IMPLIED, WRITTEN OR ORAL, STATUTORY OR

OTHERWISE, RELATED TO THE INFORMATION,

INCLUDING BUT NOT LIMITED TO ITS CONDITION,

QUALITY, PERFORMANCE, MERCHANTABILITY OR

FITNESS FOR PURPOSE. Microchip disclaims all liability

arising from this information and its use. Use of Microchip

devices in life support and/or safety applications is entirely at

the buyer’s risk, and the buyer agrees to defend, indemnify and

hold harmless Microchip from any and all damages, claims,

suits, or expenses resulting from such use. No licenses are

conveyed, implicitly or otherwise, under any Microchip

intellectual property rights.

Trademarks

The Microchip name and logo, the Microchip logo, Accuron,

dsPIC, KEELOQ, KEELOQ logo, MPLAB, PIC, PICmicro,

PICSTART, rfPIC, SmartShunt and UNI/O are registered

trademarks of Microchip Technology Incorporated in the

U.S.A. and other countries.

FilterLab, Linear Active Thermistor, MXDEV, MXLAB,

SEEVAL, SmartSensor and The Embedded Control Solutions

Company are registered trademarks of Microchip Technology

Incorporated in the U.S.A.

Analog-for-the-Digital Age, Application Maestro, CodeGuard,

dsPICDEM, dsPICDEM.net, dsPICworks, dsSPEAK, ECAN,

ECONOMONITOR, FanSense, In-Circuit Serial

Programming, ICSP, ICEPIC, Mindi, MiWi, MPASM, MPLAB

Certified logo, MPLIB, MPLINK, mTouch, nanoWatt XLP,

PICkit, PICDEM, PICDEM.net, PICtail, PIC32 logo, PowerCal,

PowerInfo, PowerMate, PowerTool, REAL ICE, rfLAB, Select

Mode, Total Endurance, TSHARC, WiperLock and ZENA are

trademarks of Microchip Technology Incorporated in the

U.S.A. and other countries.

SQTP is a service mark of Microchip Technology Incorporated

in the U.S.A.

All other trademarks mentioned herein are property of their

respective companies.

Printed on recycled paper.

Note the following details of the code protection feature on Microchip devices:

• Microchip products meet the specification contained in their particular Microchip Data Sheet.

• Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the

intended manner and under normal conditions.

• There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our

knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data

Sheets. Most likely, the person doing so is engaged in theft of intellectual property.

• Microchip is willing to work with the customer who is concerned about the integrity of their code.

• Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not

mean that we are guaranteeing the product as “unbreakable.”

Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our

products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts

allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.

Microchip received ISO/TS-16949:2002 certification for its worldwide

headquarters, design and wafer fabrication facilities in Chandler and

Tempe, Arizona; Gresham, Oregon and design centers in California

and India. The Company’s quality system processes and procedures

are for its PIC®MCUs and dsPIC®DSCs, KEELOQ®code hopping

devices, Serial EEPROMs, microperipherals, nonvolatile memory and

analog products. In addition, Microchip’s quality system for the design

and manufacture of development systems is ISO 9001:2000 certified.

TO220-5 / TO263-5 VOLTAGE

REGULATOR EVALUATION

BOARD USER’S GUIDE

Table of Contents

Preface ........................................................................................................................... 7

Introduction............................................................................................................ 7

Document Layout .................................................................................................. 7

Conventions Used in this Guide ............................................................................ 8

Recommended Reading........................................................................................ 9

The Microchip Web Site ........................................................................................ 9

Customer Support ................................................................................................. 9

Document Revision History ................................................................................... 9

Chapter 1. Product Overview

1.1 Introduction ................................................................................................... 11

1.2 What is the TO220-5 / TO263-5 Voltage Regulator Evaluation Board? ....... 11

1.3 What the TO220-5 / TO263-5 Voltage Regulator Evaluation Board

kit includes. ............................................................................................. 12

Chapter 2. Installation and Operation

2.1 Introduction ................................................................................................... 13

2.2 Features ....................................................................................................... 13

2.3 Getting Started ............................................................................................. 13

Appendix A. Schematic and Layouts

A.1 Introduction .................................................................................................. 15

A.2 Board - Schematic ....................................................................................... 16

A.3 Board - Top Silkscreen ................................................................................ 17

A.4 Board - Top Solder ....................................................................................... 18

A.5 Board - Bottom Solder ................................................................................. 19

Appendix B. Bill Of Materials (BOM)

Worldwide Sales and Service .................................................................................... 22

TO220-5 / TO263-5 Voltage Regulator Evaluation Board User’s Guide

NOTES:

TO220-5 / TO263-5 VOLTAGE

REGULATOR EVALUATION

BOARD USER’S GUIDE

Preface

INTRODUCTION

This chapter contains general information that will be useful to know before using the

TO220-5 / TO263-5 Voltage Regulator Evaluation Board. Items discussed in this

chapter include:

• Document Layout

• Conventions Used in this Guide

• Recommended Reading

• The Microchip Web Site

• Customer Support

• Document Revision History

DOCUMENT LAYOUT

This document describes how to use the TO220-5 / TO263-5 Voltage Regulator

Evaluation Board. The manual layout is as follows:

•Chapter 1. “Product Overview” - Important information about the

TO220-5 / TO263-5 Voltage Regulator Evaluation Board.

•Chapter 2. “Installation and Operation” – Includes instructions on how to get

started with this user’s guide and a description of the user’s guide.

•Appendix A. “Schematic and Layouts” – Shows the schematic and board

layouts for the TO220-5 / TO263-5 Voltage Regulator Evaluation Board.

•Appendix B. “Bill Of Materials (BOM)” – Lists the parts used to build the

sub-assemblies in the TO220-5 / TO263-5 Voltage Regulator Evaluation Board.

NOTICE TO CUSTOMERS

All documentation becomes dated, and this manual is no exception. Microchip tools and

documentation are constantly evolving to meet customer needs, so some actual dialogs

and/or tool descriptions may differ from those in this document. Please refer to our web site

(www.microchip.com) to obtain the latest documentation available.

Documents are identified with a “DS” number. This number is located on the bottom of each

page, in front of the page number. The numbering convention for the DS number is

“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the

document.

For the most up-to-date information on development tools, see the MPLAB®IDE on-line help.

Select the Help menu, and then Topics to open a list of available on-line help files.

TO220-5 / TO263-5 Voltage Regulator Evaluation Board User’s Guide

CONVENTIONS USED IN THIS GUIDE

This manual uses the following documentation conventions:

DOCUMENTATION CONVENTIONS

Description Represents Examples

Arial font:

Italic characters Referenced books MPLAB®IDE User’s Guide

Emphasized text ...is the only compiler...

Initial caps A window the Output window

A dialog the Settings dialog

A menu selection select Enable Programmer

Quotes A field name in a window or

dialog

“Save project before build”

Underlined, italic text with

right angle bracket

A menu path File>Save

Bold characters A dialog button Click OK

A tab Click the Power tab

N‘Rnnnn A number in verilog format,

where N is the total number of

digits, R is the radix and n is a

digit.

4‘b0010, 2‘hF1

Text in angle brackets < > A key on the keyboard Press <Enter>, <F1>

Courier New font:

Plain Courier New Sample source code #define START

Filenames autoexec.bat

File paths c:\mcc18\h

Keywords _asm, _endasm, static

Command-line options -Opa+, -Opa-

Bit values 0, 1

Constants 0xFF, ‘A’

Italic Courier New A variable argument file.o, where file can be

any valid filename

Square brackets [ ] Optional arguments mcc18 [options] file

[options]

Curly brackets and pipe

character: { | }

Choice of mutually exclusive

arguments; an OR selection

errorlevel {0|1}

Ellipses... Replaces repeated text var_name [,

var_name...]

Represents code supplied by

user

void main (void)

{ ...

}

Preface

RECOMMENDED READING

This user's guide describes how to use TO220-5 / TO263-5 Voltage Regulator

Evaluation Board. Other useful documents are listed below. The following Microchip

documents are available and recommended as supplemental reference resources.

MCP1790 Datasheet, “70 mA, High Voltage Regulator”, DS-22075

MCP1825 Datasheet, “500 mA, Low Voltage, Low Quiescent Current LDO

Regulator”, DS-22056

MCP1826 Datasheet, “1000 mA, Low Voltage, Low Quiescent Current LDO

Regulator”, DS-22057

MCP1827 Datasheet, “1.5A, Low Voltage, Low Quiescent Current LDO

Regulator”, DS-22001

These datasheets provide useful information regarding voltage regulator parameters

that may be validated using this evaluation board.

THE MICROCHIP WEB SITE

Microchip provides online support via our web site at www.microchip.com. This web

site is used as a means to make files and information easily available to customers.

Accessible by using your favorite Internet browser, the web site contains the following

information:

•Product Support – Data sheets and errata, application notes and sample

programs, design resources, user’s guides and hardware support documents,

latest software releases and archived software

•General Technical Support – Frequently Asked Questions (FAQs), technical

support requests, online discussion groups, Microchip consultant program

member listing

•Business of Microchip – Product selector and ordering guides, latest Microchip

press releases, listing of seminars and events, listings of Microchip sales offices,

distributors and factory representatives

CUSTOMER SUPPORT

Users of Microchip products can receive assistance through several channels:

• Distributor or Representative

• Local Sales Office

• Field Application Engineer (FAE)

• Technical Support

• Development Systems Information Line

Customers should contact their distributor, representative or field application engineer

(FAE) for support. Local sales offices are also available to help customers. A listing of

sales offices and locations is included in the back of this document.

Technical support is available through the web site at: http://support.microchip.com

DOCUMENT REVISION HISTORY

Revision A (April 2009)

• Initial Release of this Document.

TO220-5 / TO263-5 Voltage Regulator Evaluation Board User’s Guide

NOTES:

TO220-5 / TO263-5 VOLTAGE

REGULATOR EVALUATION

BOARD USER’S GUIDE

Chapter 1. Product Overview

1.1 INTRODUCTION

The TO220-5 / TO263-5 Voltage Regulator Evaluation Board is designed to provide

functional evaluation of Microchip Voltage Regulators that utilize the TO220-5 and

TO263-5 package and the following device pinouts:

The TO220-5 / TO263-5 Voltage Regulator Evaluation Board does not come with a

voltage regulator soldered onto the board. This allows the user to attach the voltage

regulator of their choosing to the board and perform quiescent current, ground current,

PSRR, and other desired tests.

The TO220-5 / TO263-5 Voltage Regulator Evaluation Board is based upon a modulare

concept which will allow the user to plug in additional boards to increase the test

capability of the voltage regulator. Planned additional modulare plugin boards currently

consist of an Input Voltage Linestep Board, Output Voltage Loadstep Board, and

several other device packages.

1.2 WHAT IS THE TO220-5 / TO263-5 VOLTAGE REGULATOR EVALUATION

BOARD?

The TO220-5 / TO263-5 Voltage Regulator Evaluation Board is designed to evaluate

and test voltage regulators. By soldering the desired device to the evaluation board, the

user can easily validate several parameters of the device.

1.2.1 Functional Blocks

The TO220-5 / TO263-5 Voltage Regulator Evaluation Board can be broken up into 6

functional blocks. The blocks are:

• Input Capacitance

• Shutdown Control

• Ground Current Measurement

• Voltage Adjust

• Power Good

• Load Resistor

1.2.2 Input Capacitance

Jumper JP1 connects the input capacitance to the circuit. The input capacitor is

disconnected when performing Power Supply Ripple Rejection tests. By default, C1 is

populated with a 1 µF, 50V, XR7 ceramic capacitor.

Pin Number U1 footprint

Pin 1 SHDN

Pin 2 VIN

Pin 3 GND

Pin 4 VOUT

Pin 5 PWRGD/ADJ

TO220-5 / TO263-5 Voltage Regulator Evaluation Board User’s Guide

1.2.3 Shutdown Control

Jumper JP2 allows the user to select the Shutdown (SHDN) pin voltage level. The

voltage level may be set to VIN, GND, or open, depending on the placement of the JP2

jumper. When the jumper is not connecting pins 1 and 2 or pins 2 and 3 of JP2, the

voltage level may be set by attaching an external signal to TP5. This allows the user to

enable, disable, or pulse the shutdown pin of the device.

The board comes with R1 populated with a 10 kΩresistor.

1.2.4 Ground Current Measurement

Jumper JP3 allows measurement of ground current. When a current meter is

connected to TP6 and TP7 and jumper JP3 is removed, the ground current of the

device may be measured.

1.2.5 Voltage Adjust

For Adjustable Output Voltage devices, R2 and R3 may be populated with appropriate

values to provide the desired output voltage.

The board comes with R2 populated with a 69.8 kΩresistor.

1.2.6 Power Good (PWRGD)

For devices with a Power Good (PWRGD) output, either R2 or R4 is populated

depending on the desired pullup source voltage.

R2 selects VOUT as the pullup source voltage.

R4 selects VIN as the pullup source voltage.

The board comes with R2 populated with a 69.8 kΩresistor.

1.2.7 Load Resistor

R5 and R6 may be populated with the desired load resistor values for the device being

evaluated. Jumper JP4 connects R5 to the device output. Jumper JP5 connects R6 to

the device output.

1.2.8 Output Capacitor

C2 may be populated with the desired output capacitance. By default, C2 is populated

with a 1 µF, 6.3V, XR7 ceramic capacitor.

1.2.9 Power Supply

J1 or TP1 and TP2 are connected to the user’s power supply.

1.3 WHAT THE TO220-5 / TO263-5 VOLTAGE REGULATOR EVALUATION

BOARD KIT INCLUDES.

This TO220-5 / TO263-5 Voltage Regulator Evaluation Board kit includes:

• TO220-5 / TO263-5 Voltage Regulator Evaluation Board (102-00203, Qty 2)

• Important Information “Read First”

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Placa madre de Microchip Technology

Microchip Technology

Microchip Technology ATtiny3217 Curiosity Nano Manual de instalación

Microchip Technology

Microchip Technology MCP6S2 Series Manual de usuario

Microchip Technology

Microchip Technology MCP1642B Manual de usuario

Microchip Technology

Microchip Technology MCP251XFD CAN FD Manual de usuario

Microchip Technology

Microchip Technology Curiosity Low Pin Count Manual de usuario

Microchip Technology

Microchip Technology SOT89-3 Manual de usuario

Microchip Technology

Microchip Technology PIC18F47K42 Curiosity Nano Manual de instalación

Microchip Technology

Microchip Technology dsPICDEM MCSM Manual de usuario

Microchip Technology

Microchip Technology PL485-EK Manual de usuario

Microchip Technology

Microchip Technology EVB-SEC1210 Manual de usuario

Microchip Technology

Microchip Technology MCP16502 Manual de usuario

Microchip Technology

Microchip Technology MCP19035 Manual de usuario

Microchip Technology

Microchip Technology ATBTLC1000 Xplained Pro Manual de usuario

Microchip Technology

Microchip Technology MCP1603 Manual de usuario

Microchip Technology

Microchip Technology PICKIT 2 PROGRAMMER-TO-GO Manual de usuario

Microchip Technology

Microchip Technology ATtiny1607 Curiosity Nano Manual de usuario

Microchip Technology

Microchip Technology EVB-LAN9252-PICtail Manual de usuario

Microchip Technology

Microchip Technology HV9805 Manual de usuario

Microchip Technology

Microchip Technology SAM E51 Curiosity Nano Manual de usuario

Microchip Technology

Microchip Technology SAM L10 Xplained Pro Manual de usuario

Microchip Technology

Microchip Technology PIC32CM JH01 Manual de usuario

Microchip Technology

Microchip Technology SAM L10 Xplained Pro Manual de usuario

Microchip Technology

Microchip Technology AVR128DA48 Curiosity Nano Manual de usuario

Microchip Technology

Microchip Technology ATSAMB11 Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario