Microchip Technology ATBTLC1000ZR-XPRO Manual de usuario

ATBTLC1000ZR-XPRO

ATBTLC1000ZR Xplained Pro User's Guide

Description

The ATBTLC1000ZR Xplained Pro is an extension board in the Xplained Pro evaluation platform. It is

designed to demonstrate ultra-low power Bluetooth® Low Energy (BLE 4.1) ATBTLC1000-ZR110CA

module together with Xplained Pro MCU boards.

Table of Contents

Description.......................................................................................................................1

1. Introduction................................................................................................................3

1.1. Features....................................................................................................................................... 3

1.2. Kit Overview................................................................................................................................. 3

2. Getting Started.......................................................................................................... 4

2.1. Xplained Pro Quick Start.............................................................................................................. 4

3. Design Documentation and Relevant Links...............................................................5

4. Xplained Pro.............................................................................................................. 6

4.1. Xplained Pro Standard Extension Header....................................................................................6

4.2. Hardware Identification System....................................................................................................7

5. Hardware Users Guide.............................................................................................. 8

5.1. ID chip content............................................................................................................................. 8

5.2. Headers and Connectors............................................................................................................. 8

5.3. Peripherals................................................................................................................................. 11

6. Hardware Revision History...................................................................................... 13

6.1. Identifying Product ID and Revision........................................................................................... 13

6.2. Revision......................................................................................................................................13

7. Document Revision History..................................................................................... 14

The Microchip Web Site................................................................................................ 15

Customer Change Notification Service..........................................................................15

Customer Support......................................................................................................... 15

Microchip Devices Code Protection Feature................................................................. 15

Legal Notice...................................................................................................................16

Trademarks................................................................................................................... 16

Quality Management System Certified by DNV.............................................................17

Worldwide Sales and Service........................................................................................18

ATBTLC1000ZR-XPRO

1. Introduction

1.1 Features

• ATBTLC1000-ZR110CA BLE Module:

– Complies with Bluetooth v4.1

– ARM® Cortex®-M0 32-bit processor

• AT30TSE758A Digital Temperature Sensor:

– Integrated with temperature sensor, non-volatile registers and serial EEPROM

– 2-Wire I2C and SMBus compatible serial interface

• Xplained Pro hardware identification system using ATSHA204A

• Power debugger support using current measurement header

• Pin headers and jumpers to connect the board to various Xplained Pro MCU boards

• Serial Wire Debugger (SWD) header

• 32.768 kHz crystal

1.2 Kit Overview

The ATBTLC1000ZR Xplained Pro is an extension board containing the ultra-low power Bluetooth module

ATBTLC1000-ZR110CA for the Xplained Pro platform. The kit can be connected to the EXT1 extension

header on an Xplained Pro MCU Board.

Figure 1-1. ATBTLC1000ZR Xplained Pro Extension board

ATBTLC1000ZR-XPRO

2. Getting Started

2.1 Xplained Pro Quick Start

Steps to start exploring the Xplained Pro platform:

1. Download Atmel Studio.

2. Launch Atmel Studio.

3. Connect ATBTLC1000ZR Xplained Pro extension board with an Xplained Pro MCU board and

connect a USB cable to the DEBUG USB port on the Xplained Pro MCU board.

When the Xplained Pro MCU kit is connected to the computer for the first time, the operating system

installs the software driver. The driver file supports 32-bit and 64-bit versions of Microsoft® Windows® XP,

Windows Vista®, Windows 7, Windows 8, Windows 10, and Windows Server 2012.

When the Xplained Pro MCU board is powered, the power LED (green color) glows and Atmel Studio

automatically detects the specific Xplained Pro MCU and extension board(s) that are connected. The kit

landing page in Atmel Studio comes with an option to launch the Advanced Software Framework (ASF)

and Atmel START, example application codes for the kit. The target device is programmed and debugged

by the on-board Embedded Debugger and therefore no external programmer or debugger tool is

required.

ATBTLC1000ZR-XPRO

3. Design Documentation and Relevant Links

The following list contains the links to the most relevant documents and software for ATBTLC1000ZR

Xplained Pro:

•Xplained Pro products - Xplained Pro is a series of small-sized and easy-to-use evaluation kits for

Microchip microcontrollers and other Microchip products. It consists of a series of low-cost MCU

boards for evaluation and demonstration of features and capabilities of different Microchip products.

•Atmel Studio - Free IDE for development of C/C++ and assembler code for microcontrollers.

•Data Visualizer - Data Visualizer is a program used for processing and visualizing data. The Data

Visualizer can receive data from various sources such as the Embedded Debugger Data Gateway

Interface found on Xplained Pro boards and COM ports.

•ATBTLC1000ZR Xplained Pro Design Documentation - Package containing schematics, BOM,

assembly drawings, 3D plots, layer plots, etc.

•ATBTLC1000ZR Xplained Pro BluSDK - Software, firmware, applications, and tools packages.

ATBTLC1000ZR-XPRO

4. Xplained Pro

Xplained Pro is an evaluation platform which contains a series of microcontroller boards (evaluation kits)

and extension boards. Atmel Studio is used to program and debug the microcontrollers on these boards.

Atmel Studio includes ASF and Atmel START, which has drivers and demo code, and Data Visualizer,

which supports data streaming and advanced debugging. Xplained Pro evaluation kits can be connected

to a wide range of Xplained Pro extension boards through standardized headers and connectors.

Xplained Pro extension boards have identification (ID) chips to uniquely identify which boards are

connected to the Xplained Pro evaluation kits.

4.1 Xplained Pro Standard Extension Header

All Xplained Pro kits have one or more dual row, 20-pin, 100-mil extension header. The Xplained Pro

MCU boards have male headers, while the Xplained Pro extensions have their female counterparts. All

connected pins follow the defined pin description in the table.

Info: All pins are not always connected on all extension headers.

The extension headers can be used to connect a variety of Xplained Pro extensions to Xplained Pro MCU

boards or to access the pins of the target microcontroller on Xplained Pro MCU boards directly.

Table 4-1. Xplained Pro Standard Extension Header

Pin Number Pin Name Description

1 ID Pin to communicate with the ID chip on an extension board

2 GND Ground

3 ADC(+) Analog-to-Digital Converter; alternatively, a pin for the positive

terminal of a differential ADC

4 ADC(-) Analog-to-Digital Converter; alternatively, a pin for the negative

terminal of a differential ADC

5 GPIO1 General purpose I/O pin

6 GPIO2 General purpose I/O pin

7 PWM(+) Pulse width modulation; alternatively, a pin for the positive part of a

differential PWM

8 PWM(-) Pulse width modulation; alternatively, a pin for the negative part of a

differential PWM

9 IRQ/GPIO Interrupt request pin and/or general purpose I/O pin

10 SPI_SS_B/

GPIO

Slave select pin for Serial Peripheral Interface (SPI) and/or general

purpose I/O pin

11 I2C_SDA Data pin for I2C interface. Always connected, bus type

12 I2C_SCL Clock pin for I2C interface. Always connected, bus type

ATBTLC1000ZR-XPRO

Pin Number Pin Name Description

13 UART_RX Receiver pin of target device UART

14 UART_TX Transmitter pin of target device UART

15 SPI_SS_A Slave select for SPI. This pin should preferably not be connected to

anything else.

16 SPI_MOSI SPI master out slave in pin. Always connected, bus type

17 SPI_MISO SPI master in slave out pin. Always connected, bus type

18 SPI_SCK SPI clock pin. Always connected, bus type

19 GND Ground pin for extension boards

20 VCC Power pin for extension boards

4.2 Hardware Identification System

All Xplained Pro extension boards come with an identification chip (ATSHA204A CryptoAuthentication

chip) to uniquely identify the boards that are connected to the Xplained Pro evaluation kit. This chip

contains information that identifies the extension with its name and some extra data. When an Xplained

Pro extension is connected to an Xplained Pro evaluation kit, the information is read and sent to Atmel

Studio. The following table shows the data fields stored in the ID chip with example content.

Table 4-2. Xplained Pro ID Chip Content

Data Field Data Type Example Content

Manufacturer ASCII string Atmel'\0'

Product Name ASCII string Segment LCD1 Xplained Pro'\0'

Product Revision ASCII string 02'\0'

Product Serial Number ASCII string 1774020200000010’\0’

Minimum Voltage [mV] uint16_t 3000

Maximum Voltage [mV] uint16_t 3600

Maximum Current [mA] uint16_t 30

ATBTLC1000ZR-XPRO

5. Hardware Users Guide

5.1 ID chip content

The ATBTLC1000ZR Xplained Pro can be connected to several Xplained Pro MCU boards and manually

connected to other hardware. Xplained Pro MCU board(s) that does not have 3.3V as its primary target

voltage reads all ID devices on connected extensions to check if they support the target voltage before

enabling it to the extension headers. The table provides the static content written in the ID chip.

Table 5-1. ATBTLC1000ZR Xplained Pro ID Chip Content

Data field Content

Product name ATBTLC1000ZR-XPRO

Minimum operation voltage 1.8V

Maximum operation voltage 3.3V

Maximum current 10mA

Related Links

Xplained Pro Standard Extension Header

5.2.2 Current Measurement Header

Current Measurement header J109 can be used to measure the current consumed by the ATBTLC1000-

ZR110CA module using an ammeter. The two 0Ω resistors R111 and R112 can be removed to measure

the current consumed by individual power rails VDDIO and VBAT respectively by soldering in wires for an

ammeter.

5.2.3 Jumper Configuration on Pin headers

The ATBTLC1000 ZR Xplained Pro has few pin headers and jumpers to configure UART(with flow

control) or SPI interface with different pins on the extension header of the Xplained Pro MCU board. The

headers provided for this purpose are:

• 1x2 Pin headers (J101, J102, J103, J104) - 4

• 1x3 Pin headers (J105, J106, J107, J108) - 4

The pin headers and its functionality are mentioned in the table.

Table 5-3. Pin Headers and Functions

Pin on EXT1 Pin headers Function

5 J101 UART_CTS

6 J102 UART_RTS

13 J104 UART_TXD

14 J103 UART_RXD

ATBTLC1000ZR-XPRO

Pin on EXT1 Pin headers Function

15 J108 SPI_SS/UART_TXD

16 J107 SPI_MOSI/UART_CTS

17 J105 SPI_MISO/UART_RXD

18 J106 SPI_SCK/UART_RTS

Note: The pins 15,16,17,18 can be configured as either UART or SPI.

These pin headers and jumpers makes it possible to connect the extension board to many Xplained Pro

MCU boards. It can be configured in any one of the ways as mentioned in the table.

Table 5-4. Jumper Configuration on Pin headers

Functionality Pins on EXT1 Pin headers Jumper Placement

UART 5,6,13,14 J101,J102,J103,J104 J1-2

UART 15,16,17,18 J105,J106,J107,J108 J2-3

SPI 15,16,17,18 J105,J106,J107,J108 J1-2

5.2.4 Debug Connectors

Debug I2C (J120) and Extension port (J118) are mounted on the board.

Table 5-5. Debug I2C Connector

Pin on I2C connector Pin on ATBTLC1000ZR module Function

1 5 DEBUG I2C SCL

2 26 Ground

3 4 DEBUG I2C SDA

4 - Not Connected

Table 5-6. Extension Port

Pin on Extension Port Pin on ATBTLC1000ZR module Function

1 18 DEBUG_UART_RXD

2 19 DEBUG_UART_TXD

3 26 Ground

Note:

BluSDK does not support debug information through debug I2C and debug UART. Debug I2C and debug

UART headers are placeholders for future usage.

ATBTLC1000ZR-XPRO

Tabla de contenidos

Otros manuales de Placa madre de Microchip Technology

Microchip Technology

Microchip Technology XLP Manual de usuario

Microchip Technology

Microchip Technology CEC1x02 Manual de usuario

Microchip Technology

Microchip Technology CAP1 Series Manual de usuario

Microchip Technology

Microchip Technology EVB-LAN9252-ADD-ON Manual de usuario

Microchip Technology

Microchip Technology DM320115 Manual de instalación

Microchip Technology

Microchip Technology MCP1664 Manual de usuario

Microchip Technology

Microchip Technology SAM R34 Xplained Pro Manual de usuario

Microchip Technology

Microchip Technology HPC Manual de usuario

Microchip Technology

Microchip Technology HV9805 Manual de usuario

Microchip Technology

Microchip Technology Curiosity PIC32MZ EF 2.0 Manual de usuario

Microchip Technology

Microchip Technology DM160232 Manual de usuario

Microchip Technology

Microchip Technology UCS1003-1 Manual de usuario

Microchip Technology

Microchip Technology UCS1003-1 Manual de usuario

Microchip Technology

Microchip Technology ATBTLC1000 Xplained Pro Guía de instalación

Microchip Technology

Microchip Technology EVB-LAN9252-3PORT Manual de usuario

Microchip Technology

Microchip Technology AVR-IoT WG Manual de usuario

Microchip Technology

Microchip Technology SAM D21 Manual de usuario

Microchip Technology

Microchip Technology HV7351 Manual de usuario

Microchip Technology

Microchip Technology HV2918 Manual de usuario

Microchip Technology

Microchip Technology MCP19035 Manual de usuario

Microchip Technology

Microchip Technology Curiosity Nano PIC24FJ64GU205 Manual de usuario

Microchip Technology

Microchip Technology MIC23656 Manual de usuario

Microchip Technology

Microchip Technology HV2903 Manual de usuario

Microchip Technology

Microchip Technology MIC24045 Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario