Microchip Technology DsPIC30F Manual de usuario

dsPIC30F Design

Contest

The Best of Both Worlds

Ofcial Guide

Contents

An Overview on Entering the Design Contest

3-4

dsPIC30F Design Contest Kit Contents 3

Accessing the Contest Submission Form 4

Entry Submittal 4

dsPIC30F Design Contest Ofcial Rules 5-11

Contest Period 5

The Contest 5

Prizes 5-6

Entry Requirements 6

Entry Submittal 6-9

dsPIC30F Design Contest Project Entry Form 7

Judging Criteria 7-8

Extra Credit 8-9

Eligibility 9

Awarding of Prizes 9

General Rules 10-11

MPLAB C30 C Compiler Coupon back

Welcome to the dsPIC30F Design Contest

Thank you for your interest in dsPIC® digital signal controllers and participating in

the dsPIC30F Design Contest. With this comprehensive development package,

you can develop a powerful contest entry and/or start product development today.

The dsPIC30F is a new breed of controller that combines the attributes of a 16-

bit microcontroller with a fully-featured digital signal processor (DSP). If you are

unfamiliar with DSP products, don’t worry. The dsPIC30F is designed to look and

feel like a microcontroller and uses the same tools, terms, etc.

The rst section of this document, An Overview on Entering the Design Contest,

discusses accessing the dsPIC30F Design Contest Project Entry Form on the

dsPIC30F Design Contest CD-ROM and entry submittal procedures.

The second section, dsPIC30F Design Contest Ofcial Rules, lists the rules that

govern the contest. Consider reviewing the rules before beginning your design.

The third section, located on the back cover of this document, is a limited time

special offer for the MPLAB® C30 C Compiler.

Sincerely,

dsPIC30F Marketing Team

An Overview on Entering the Design Contest

Entering the dsPIC30F Design Contest involves several key elements:

· Purchase a dsPIC30F Design Contest Kit by June 11, 2004.

· Design whatever you want – please review the judging criteria on

pages 7-8.

· Complete the dsPIC30F Design Contest Project Entry Form

including all elements listed on the Project Checklist section of

this form. The dsPIC30F Design Contest Project Entry Form

is located on the dsPIC30F Design Contest CD-ROM.

Instructions for accessing the le are on page 4.

· If desired, complete the extra credit optional article discussed

in the dsPIC30F Design Contest Project Entry Form.

· Submit completed Contest Entry on or before September 10,

2004. Methods of submission are discussed on page 4. Be

sure to note that all methods require that a signed and dated

copy of the Eligibility Form (a section of the dsPIC30F Design

Contest Project Entry Form) is submitted.

If you have any questions, please review the dsPIC30F Design Contest

Ofcial Rules on pages 5-11 or e-mail [email protected].

dsPIC30F Design Contest Kit Contents

• dsPICDEM™ 1.1 General Purpose Development Board

• MPLAB® C30 C-Compiler*

• MPLAB VDI Visual Device Initializer

• dsPICworks™ Data Analysis and DSP Software

•

Digital Filter Design Tool (lite version)

• MPLAB IDE Integrated Development Environment

• MPLAB ASM30 Assembler/Linker/Librarian

• MPLAB SIM30 Software Simulator

• Math Library

• DSP Algorithm Library

• Peripheral Driver Library

• Getting Started with dsPIC30F presentations

• Power Supply

• IEC Power Cable

• RS-232 Cable

• Coupon for $200USD off purchase of an MPLAB C30 C Compiler

* MPLAB C30 C Compiler enabled through September 30, 2004.

Accessing the Contest Submission Form

The dsPIC30F Design Contest Project Entry Form must be completed by

opening the Microsoft Word .doc, .rtf or .txt le version of the form on

the dsPIC30F Design Contest CD-ROM enclosed in this kit. Enter your

information directly in the electronic le in English. An alternative method

for completing the form is to open and print the .doc, .rtf or .txt version of

the document on the CD-ROM and either writing/typing legibly in English

directly on the form.

Each entry must contain the following: a completed dsPIC30F Design

Contest Project Entry Form including all items on the Project Checklist

on this form, and if completed, the optional design idea or feature length

article. The deadline for Microchip receipt of the entry is September 10,

2004 at noon Mountain Standard Time.

Entry Submittal

Entries can be submitted in one of two ways:

• E-mail your project information/les to:

[email protected].

• Mail a CD-ROM/oppy disk with your project information/les

and any printed material (Microchip is not responsible for

materials lost in the mail) to:

dsPIC30F Design Contest Manager MS-1E

Microchip Technology Inc.

2355 W. Chandler Blvd.

Chandler, AZ 85224

All methods of entry submittal require that you print out/copy the

Eligibility Form section of the dsPIC30F Design Contest Project Entry

Form and sign it, date it and mail it to:

dsPIC30F Design Contest Manager MS-1E

Microchip Technology Inc.

2355 W. Chandler Blvd.

Chandler, AZ 85224

Send no hardware. Finalists will be contacted for proof of

implementation.

dsPIC30F Design Contest Ofcial Rules

Contest Period

The contest runs from April 26 – September 10, 2004. Contest Kits must

be purchased by June 11, 2004.

The Contest

Microchip will give away nineteen prizes of various values. Contestants

must purchase a dsPIC30F Design Contest Kit and submit a design to

Microchip no later than September 10, 2004 at noon Mountain Standard

Time based on the guidelines described below. The initial submissions

will be evaluated by a panel of Microchip employees with the top twenty

submissions selected as nalists. These nalist submissions will be

judged by a panel composed of three Microchip employees with each

submission receiving a numeric score based on the published judging

criteria described in dsPIC30F Design Contest Kit. Scores will be ranked

from highest to lowest with the ranking used to assign prizes. The total

number of entries is limited to the number of dsPIC30F Design Contest

Kits sold. Odds of winning the grand prize is based on number of entries

with odds equal to or better than 1 in 5000.

Prizes

Contest winners will be ranked by their respective scores with the highest

ranking score receiving rst prize, the second highest score receiving

second prize, etc. In the event of a tie, a random drawing conducted by

Microchip will determine prize assignment order.

The rst place prize is a Harley Davidson® Electra Glide® Motorcycle or

$15,000USD Cash. The second place prize is a 43” Plasma Television

or $7,500USD Cash. The third place prize is a DVD Home Theater

Entertainment System or $3,000USD Cash. The fourth place prize is a

Microchip MPLAB® ICE 4000 In-Circuit Emulator. The fth through ninth

place prize is a Microchip MPLAB C30 C Compiler (one prize awarded to

each of the ve winners for this prize level). The tenth through fourteenth

place prize is a Microchip MPLAB ICD 2 In-Circuit Debugger (one prize

awarded to each of the ve winners for this prize level). The fteenth

through nineteenth place prize is a Momentum Data Systems Digital Filter

Design software tool (one prize awarded to each of the ve winners).

All cash prize choices are in US dollars, and if a cash prize is selected, it

must be awarded in US dollars. Microchip reserves the right to substitute

a similar prize of like value if the contest winner selects a non-cash prize

and lives in a region of the world where the technology is not supported

or if the specic model is no longer available.

Any use or gift taxes, duties or other related taxes are not included and

are the sole responsibility of the winner.

Entry Requirements

The dsPIC30F Design Contest Kit Project Entry Form must be completed

with the required les attached. For each dsPIC30F Design Contest Kit

purchased, contestants can submit one entry.

All entries must be received by Microchip on or before September 10,

2004 at noon Mountain Standard Time.

After purchasing a dsPIC30F Design Contest Kit, contestants can design

whatever they choose using the included dsPICDEM™ General Purpose

Development Board. If you already own a dsPICDEM General Purpose

Development Board, you do not need to purchase another board.

Customers who already own the dsPICDEM General Purpose Development

Board and wish to participate in the contest can e-mail

[email protected] to request contest materials. Such

requests must be received no later than June 11, 2004 and the

subject line of the e-mail must contain the words, “PRESENT BOARD

OWNER.” The application developed must run on the dsPICDEM General

Purpose Development Board. Contestants can attach other devices

to the dsPICDEM General Purpose Development Board. The designed

application must be functional and must be programmed using Assembly

and/or C code.

After nishing the design, contestants must complete each element of

the dsPIC30F Design Contest Project Entry Form contained in the Design

Contest Kit and submit this form, items on the Project Checklist and, if

completed, the optional design idea or feature length article.

Entry Submittal

Entries can be submitted in one of two ways:

• E-mail your project information/les to:

[email protected].

• Mail a CD-ROM/oppy disk with your project information/les

and any printed material (Microchip is not responsible for

materials lost in the mail) to:

dsPIC30F Design Contest Manager MS-1E

Microchip Technology Inc.

2355 W. Chandler Blvd.

Chandler, AZ 85224

All methods of entry submittal require that you print out/copy the

Eligibility Form section of the dsPIC30F Design Contest Project Entry

Form and sign it, date it and mail it to:

dsPIC30F Design Contest Manager MS-1E

Microchip Technology Inc.

2355 W. Chandler Blvd.

Chandler, AZ 85224

Send no hardware. Finalists will be contacted for proof of

implementation.

dsPIC30F Design Contest Project Entry Form

Contestants must review this Ofcial Guide and submit a completed

dsPIC30F Design Contest Project Entry Form, which serves as an

introduction to the project, provides a checklist to help ensure that the

entry is complete and constitutes an afdavit of eligibility and agreement

to terms and conditions state in this Ofcial Guide and the Project Entry

Form. The checklist includes:

o Completed Project Entry Form including Project Description, Self

Scoring Sheet and Eligibility Form sections

o Schematic

o Block diagram of overall application and ow diagram when

appropriate

o Project source code including source-level comments

o Optional article

Judging Criteria

Contestants must also complete the Self Scoring Sheet section of the

dsPIC30F Design Contest Project Entry form. Contestants will evaluate

their projects based on the following elements:

1. How many MIPS did your application use?

Up to 10 MIPS _______ (10 points)

11 - 20 MIPS _______ (20 points)

20 - 30 MIPS _______ (50 points)

2. Technical merit/well optimized code ________ (15 points)

3. General usefulness. Is the design topic of value to the engineering

community at large? _________ (15 points)

4. Justify how the application benets from using on-chip Flash memory

_________ (0 - 25 points)

5. Some portion of the code is in C _________ (5 points)

6. Number of resources used by application _______ (total points)

___ DCI (Codec Interface) (3 Points)

___ A/D Converter (5 Points)

___ Use of Peripheral or DSP Libraries (6 Points)

___ Use of CMX Scheduler, dsPICworks™, Digital Filter Design or

MPLAB® VDI Visual Device Initializer (10 Points)

___ SLEEP or IDLE Instructions (2 Points)

___ Clock Switching (2 Points)

___ EEPROM (2 points)

___ Prioritized Interrupts (2 Points)

___ Multi-Bit Shift Instructions (3 Points)

___ MAC Class of Instructions Outside the Usage of the DSP Library

(3 Points)

___ Divide Instructions (3 Points)

___ Effective Use of Both Accumulators (3 Points)

___ Data Constants in Program Flash (3 Points)

___ Indirect and/or Modulo Addressing Mode Utilization (3 Points)

7. Justify the cleverness of design technique____ (0-15 points)

8. Justify why your application benets from using the dsPIC30F ____

(0-15 points)

9. Was your application fully functional? ____ (0-30 points)

Extra Credit

10. Select one of two options if desired:

You may submit one of the following to receive additional points:

1. Write a design idea article of 500-700 words with one to two

schematic/graphics ____ (0-10 Points)

2. Write a feature-length article of 1500-3000 words with three to

ve schematic/graphics ____(0-20 Points)

Note:

• Design idea articles focus on a specic dsPIC30F product while

feature articles may only reference specic products briey.

• The article may describe your contest entry or any other dsPIC30F

topic you think would be of general interest to the engineering

community.

To receive extra credit points in the contest, your article must be

submitted with your contest entry. Winners of the contest will be chosen

by their overall contest score. Selection of your article for publication

does not guarantee any prize in the contest nor is there any assurance

that your article will be published.

In submitting the article you agree that you are granting Microchip

a non-exclusive, perpetual, worldwide, no-charge license under your

store, modify, and publish, in any manner and in any media, the article

you submit. You warrant that the article you submit is your own

creation and does not violate any intellectual property rights of another.

You agree that your name may be published in association with the

publication of the article without compensation. Any publication by

Microchip shall be solely at Microchip’s election and discretion.

You may help Microchip in modifying the article and/or in providing

biographical information that may be published in association with the

article. If you choose to submit such information or provide such help,

you are agreeing that the modied article and biographical information

are licensed under the same terms stated in the prior paragraph.

Eligibility

To be eligible the entrant must have purchased a dsPIC30F Design

Contest Kit and followed the guidelines for submittal. Contestants must

be at least age 18 or over at the date of entry.

Direct employees of Microchip, their afliates, consultants, distributors,

representatives, advertising, promotion, production agencies, members of

their immediate families, or those with whom they are domiciled are not

eligible.

Awarding of Prizes

Winners will be chosen on or before October 22, 2004. Microchip will

contact winners within a reasonable amount of time to arrange for

delivery of their prize. A Microchip representative may personally deliver

prizes to the winner, unless Microchip elects otherwise. If the participant

does not accept personal delivery by a Microchip representative, any

prize may be awarded to an alternative winner selected by Microchip. If

Microchip elects to ship the prize, Microchip will pay all shipping charges,

and if undeliverable, Microchip reserves the right to award the prize to

another contestant.

Microchip is solely responsible for the payment and distribution of all

prizes. The winners agree that signing the Eligibility Form constitutes an

afdavit of eligibility and agreement to the terms and conditions stated

herein. The contestant also agrees that Microchip is not responsible for

late shipments of prizes.

Any use or gift taxes, duties or other related taxes are not included and

are the sole responsibility of the winner.

Microchip is solely responsible for the selection of winners and for the

payment and distribution of all prizes. All judging decisions are nal.

General Rules

Contest rules are subject to change without notice.

Warranty of the dsPIC30F Design Contest Kit is subject to the

applicable “Microchip Terms and Conditions of Sale” which can be

found at http://www.microchip.com/termsandconditions. Microchip

expressly disclaims all other warranties or liabilities.

By entering, contestants release Microchip, its agents, and hosting

service from all liability with respect to the use of the prizes awarded

herein, agree to be bound by these rules, and consent to the use of their

names and contact information for future marketing purposes without

additional compensation. By entering, contestants warrant and represent

that the work submitted is their own original work and not the intellectual

property of others or that the contestant has written legal permission for

use from the property owner.

Microchip is not responsible for incorrect or inaccurate entry of

information including, but not limited to, technical malfunctions, human

error, lost/delayed data transmission, omission, interruption, deletion,

defect, line failures of any telephone network, computer equipment,

software or any combination thereof, entry materials that have been

tampered with, or e-mail or mail-in entries that are illegible, late, lost, or

misdirected.

Microchip reserves the right to cancel, terminate, modify, or suspend

this contest without obligation if it discovers fraud, or any other causes

beyond the control of Microchip which corrupt or affect the administration,

fairness, integrity, or proper conduct of this promotion.

Before submitting any design, idea, or work, you may want to consider

seeking a patent for any unique or proprietary aspects of your design.

The design remains the intellectual property of the contestant. All

materials submitted will remain the property of Microchip. All contestants

grant Microchip a non-exclusive perpetual worldwide license to publish

and display in print or electronic format any contest project information

submitted in the form of articles, application notes, or technical briefs if

their submission receives a prize.

Otros manuales para dsPIC30F

Tabla de contenidos

Otros manuales de Controladores de Microchip Technology

Microchip Technology

Microchip Technology PIC16C63A Manual de usuario

Microchip Technology

Microchip Technology HV9805 Manual de usuario

Microchip Technology

Microchip Technology PL360 Manual de usuario

Microchip Technology

Microchip Technology dsPIC30F Manual de referencia

Microchip Technology

Microchip Technology dsPIC30F Manual de usuario

Microchip Technology

Microchip Technology MCP1643 Manual de usuario

Microchip Technology

Microchip Technology ATWINC 15x0 Manual de instrucciones

Microchip Technology

Microchip Technology dsPIC30F6010 Manual de usuario

Microchip Technology

Microchip Technology MCP8063 Manual de usuario

Microchip Technology

Microchip Technology PICtail Plus MCP25625 Manual de usuario

Microchip Technology

Microchip Technology ATWILC1000 Manual de usuario

Microchip Technology

Microchip Technology MCP8063 Manual de usuario

Microchip Technology

Microchip Technology ATWINC15x0 Series Manual de usuario

Microchip Technology

Microchip Technology USB2422 Instrucciones de funcionamiento y mantenimiento

Microchip Technology

Microchip Technology MCP19035 Manual de usuario

Microchip Technology

Microchip Technology MIC2125 Instrucciones de funcionamiento y mantenimiento

Microchip Technology

Microchip Technology MPLAB Manual de usuario

Manuales populares de Controladores de otras marcas

Digiplex

Digiplex DGP-848 Instrucciones de funcionamiento

YASKAWA

YASKAWA SGM series Manual de usuario

Sinope

Sinope Calypso RM3500ZB Manual de usuario

Isimet

Isimet DLA Series Style 2 Manual de instalación

LSIS

LSIS sv-ip5a Manual de usuario

Rockwell Automation

Rockwell Automation 1769-L31 Manual de usuario

Airflow

Airflow Uno hab Manual de usuario

ABB

ABB ACS580-01 drives Manual de usuario

Panasonic

Panasonic GM1 Series Manual de usuario

Emerson

Emerson SW93 Manual de usuario

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manual de usuario

Panasonic

Panasonic FP? Positioning Unit RTEX Manual de usuario

Samson

Samson Type 5824 Manual de servicio

Alpha IP

Alpha IP MIOB 21001 Manual de usuario

Siemens

Siemens OpenAir GMA 1 Series Manual de usuario

Surecom

Surecom SR-629 Manual de usuario

Fishman

Fishman TriplePlay Manual de usuario

Regulus

Regulus SRS1 T Manual de usuario