1. The input voltage is DC5V/500mA, Please do not
connect the power supply over DC5V, otherwise,
the device will be broken easily.
2. Non-professional user cannot dismantle the divice
directly, otherwise, the device will be broken easily.
3. The working temperature is -20~60℃; Do not install
the device to direct sunlight, moist and other high
temperature area.
4. Please do not install the device around the mental
area and high magnetic field, otherwise, it will
badly affect the control distance.
Made in China
Attention
4. User Instruction
Setting DMX512 address:
Zone selection:
1. Install MiBoxer APP. Click“ + ” add devices( See
details on MiBoxer APP instructions).
2. Click "433 Gateway" on the device list to enter
control interface.
3. Click "Link/Unlink". Link/Unlink method, See details
on APP link/unlink instruction.
4. After linking successfully, back to the control
interface to control the lights randomly.
Click "Set DMX" on the top right corner; Set DMX512
address for gateway on the pop-up window.
Click the "Zone" on the left bottom into the Zone selection.
Gateway copy the remote ID to fulfill the gateway and
remote ID no difference; after linking with remote, the
gateway can control the lamps directly without linking
again.
Short press gateway "SET" five times; restore
successfully after devices indicating lamp blink 3 times.
Learning function: Restore gateway ID:
1. click "Learn" button, device indicating lamp blinking.
2, within 10 seconds, click any button on the remote,
APP will hint learning successfully.
Note: Just FUT086 433MHz remote support learning
currently.
Note: Please select the linked Zone, otherwise it cannot
control the lamps.
Gateway need to occupy 5 address to control lamp's
red,green,blue,warm white and coor white accordingly.
i.e: Set the gateway DMX512 address to 008
Note: You must link the lamps to the gateway to control
the lamps(Linking instruction see details for Miboxer
APP Link/Unlink interface).
Note: This gateway cannot group control.
Mobile
10:18 95%
Device List
433 Gateway ON
Device Group Discovery
Mobile
Mobile
10:18 95%
433 Gateway
Set DMX
White LightZone1 Timer Link / Unlink
Mobile
Mobile
10:18 95%
433 Gateway
Set DMX
White LightZone1 Timer Link / Unlink
Mobile
Mobile
10:18 95%
433 Gateway
Set DMX
White LightZone1 Timer Link / Unlink
Mobile
White Light Timer Link / Unlink
Link/Unlink
Mobile
10:18 95%
Link / Unlink
Select zones
Zone1
Zone5
Zone2
Zone6
Zone3
Zone7
Zone4
Zone8
UnlinkLinkLearn
1. Please select linking channel
2. Switch of the light; after 10 seconds, switch on again.
3. Press the linking button once within 3 seconds.
4. Link is done when the light blink 3 times slowly.
Note: If the light doesn’t blink slowly, Linking is failed.
1. Please check if the light is compatible with the remote.
2. Check if the light has been linked; The linked light
cannot be linked again.
3. Please follow above steps to link again.
1. Please select the linking channel
2. Switch of the light; after 10 seconds, switch on again.
3. Press the unlinking button once within 3 seconds.
4. Unlink is done when the light blink 10 times quickly.
Note: If the light doesn’t blink quickly, Unlinking is failed.
1. Please check if the light is compatible with the remote.
2. Check if the light has been linked; The unlinked light
cannot be unlinked again.
3. Please follow above steps to unlink again.
Linking instruction:
Unlinking instruction:
Mobile
White Light Timer Link / Unlink
Link/Unlink
Mobile
10:18 95%
Link / Unlink
Select zones
Zone1
Zone5
Zone2
Zone6
Zone3
Zone7
Zone4
Zone8
UnlinkLinkLearn
1. Please select linking channel
2. Switch of the light; after 10 seconds, switch on again.
3. Press the linking button once within 3 seconds.
4. Link is done when the light blink 3 times slowly.
Note: If the light doesn’t blink slowly, Linking is failed.
1. Please check if the light is compatible with the remote.
2. Check if the light has been linked; The linked light
cannot be linked again.
3. Please follow above steps to link again.
1. Please select the linking channel
2. Switch of the light; after 10 seconds, switch on again.
3. Press the unlinking button once within 3 seconds.
4. Unlink is done when the light blink 10 times quickly.
Note: If the light doesn’t blink quickly, Unlinking is failed.
1. Please check if the light is compatible with the remote.
2. Check if the light has been linked; The unlinked light
cannot be unlinked again.
3. Please follow above steps to unlink again.
Linking instruction:
Unlinking instruction:
Cancel
Learning...Please press any button
on remote
Cancel OK
Set DMX512 Address
Current address：001
Please input number from 1~512
Occupied
address
Controlled
colors
008 009 010 011 012
Red Green Blue
Cold white Warm White
