MGE UPS Systems Pulsar EX10Rack Manual de usuario

Pulsar EX

Rack

: 86-153522-00

MGE UPS SYSTEMS

User Manual

PulsarTM

EX10

Rack

/ EX15

Rack

EXB10

Rack

…

–

…

………

www.mgeups.com

Pulsar EX

Rack

: 86-153522-00 MGE UPS SYSTEMS

Thank you for purchasing the EX

Rack

Uninterruptible Power Supply.

The EX

Rack

has been designed to

provide many years of trouble-free

operation.Please review the manual

which has been prepared to provide

you with all the necessary information

concerning the installation and use of

your EX

Rack

For service call 1-800-523-0142.

Sincerely,

MGE UPS SYSTEMS

Federal Communications

Commission (FCC) Statement

Note: this equipment has been tested and

found to comply with Part 15 of the FCC

Rules. These limits are designed to provide

reasonable protection against harmful

interference when equipment is operated in

a residential environment. This equipment

generates, uses and can radiate radio

frequency energy and, if not installed and

used in accordance with the instruction

manual, may cause harmful interference to

radio communications. Properly shielded

and grounded cables and connectors must

be used in order to meet FCC emission

limits.

Revision A00 ECN - 000071

MGE UPS SYSTEMS Pulsar EX

Rack

: 86-153522-00 i

IMPORTANT SAFETY INSTRUCTIONS

SAVETHESE INSTRUCTIONS

This manual contains important instructions for Models EX10

Rack

/EX15

Rack

/EXB10

Rack

/EXB15 that

should be followed during installation and maintenance of the UPS batteries.

cThis equipment can be operated by any

individual, with no previous training;

cCAUTION: Risk of electric shock, even

with unit disconnected from AC power

source. Hazardous voltage still may be

present through operation from battery.

The battery supply should be disconnected

at the plus and minus terminals using the

quick disconnect connectors of the battery

when maintenance or service work inside

the UPS is necessary.

cThe UPS contains voltages which are

potentially hazardous. All repairs should

be performed by qualified service

personnel only;

cdo not attempt to power the UPS from

any receptacle other than a 2-pole 3-wire

grounded receptacle;

cdo not place Pulsar near water or in

environment of excessive humidity;

cdo not allow liquids or any foreign objects

to get inside Pulsar;

cdo not block air vents in the back of

Pulsar;

cdo not plug household appliances such as

hair dryers to Pulsar receptacles;

cdo not place Pulsar in direct sunlight or

close to heat-emitting source;

c~: alternating current supply symbol;

cCAUTION: do not dispose of battery or

batteries in a fire. The battery may explode;

cCAUTION: do not open or mutilate the

battery or batteries, released electrolyte is

harmful to the skin and eyes. It may be toxic;

cCAUTION: a battery can present a risk of

electric shock and high short circuit current.

The following precautions should be

observed when working with batteries:

vremove watches, rings or other metal

objects,

vuse tools with insulated handles,

vwear rubber gloves, boots and safety

glasses;

cplease dispose of the packaging in

accordance with the applicable laws.

cthe AC power receptacle should be near

the equipment and easily accessible. To

isolate Pulsar from AC input, remove the

input power cord from the AC power

receptacle;

cif Pulsar is to be stored for a long time, it

is recommended to recharge the batteries

(by connecting AC power source to Pulsar,

switch "ON" or "OFF"), once a month for 24

hours to avoid a full batteries discharge;

cPulsar contains batteries that should be

disposed of or recycled in accordance with

local applicable laws;

cprior to installation, store Pulsar in a dry

location;

cstorage temperatures must be between

–4°F (-20°C) and +113°F (+45°C);

cservicing of batteries should be performed

or supervised by personnel knowledgeable

of batteries and the required precautions.

Keep unauthorized personnel away from

batteries;

cwhen replacing the batteries, use the

same number and the following type of

batteries:

vPulsar EX10

Rack

: 3 x 12V - 7.2Ah,

vPulsar EX15

Rack

: 4 x 12V - 7.2Ah;

ii Pulsar EX

Rack

: 86-153522-00 MGE UPS SYSTEMS

introduction

In critical situations, count on MGE UPS

SYSTEMS Pulsar EX10

Rack

and

EX15

Rack

uninterruptible power supplies

(UPS). Their protection keeps your data

intact and accessible.

Pulsar EX10

Rack

and EX15

Rack

UPSs

ensure top quality power around the clock,

and continue operations during power

failures. An intelligent microprocessor

detects any operating anomalies of the UPS

and triggers an alarm if corrective action is

necessary.

In addition to the high-technology aspect of

these UPSs, you can count on backup from

our staff, a team of specialists, around the

corner from you, throughout the world. It’s

no accident that MGE UPS SYSTEMS is the

world leader in UPS protection.

uses of Pulsar EX10

Rack

and

EX15

Rack

Network servers and interconnection

devices are very sensitive to electrical

disturbances of all types, including outages,

voltage sags, brownouts, spikes, etc. The

origins of the disturbances also vary, ranging

from atmospheric phenomena, to nearby

devices generating interference such as

elevators, photocopy machines and machine

tools, not to mention human errors, like the

accidental pulling out of power cords or

tripping of circuit breakers. The

consequences of these disturbances on

computer systems range from data losses to

hardware damage (power supplies, hard

disks).

Pulsar EX10

Rack

and EX15

Rack

are

specially designed to protect network

servers and all other devices that are

sensitive to electrical disturbances.

Pulsar EX10

Rack

and EX15

Rack

add fault-

tolerance to the utility supplying your

sensitive equipment.

Pulsar EX10

Rack

and EX15

Rack

are

designed as compact units and feature very

quiet operation.

Pulsar EX10

Rack

and EX15

Rack

provide a

stable supply of clean power, long back-up

time during a utility outage (see table) and

vast information and control possibilities

according to the configuration selected.

Pulsar EX10

Rack

and EX15

Rack

On-Line

technology provides maximum protection

and availability of your workstations, servers,

and network communication devices.

Pulsar EX10

Rack

and EX15

Rack

offer

many functions and characteristics designed

to simplify power management:

cautomatic battery test carried out

periodically. In the event of a fault, a LED

provides advance warning for battery

replacement;

cfront panel LEDs signal all types of faults

and alarms;

cBar graph continuously indicates the

battery charge level or the critical load power

level;

cPulsar EX10

Rack

and EX15

Rack

are

environment friendly: all components are

recyclable and an electronic power-saver

device reduces power consumption if the

UPS is not active for a period exceeding 5

minutes while on battery back-up;

cEX Driver software provides rapid startup

of Pulsar EX10

Rack

and EX15

Rack

using

the EX Tuner configuration module. This

module adapts Pulsar EX10

Rack

and

EX15

Rack

to user preferences (battery test

frequency, startup and shutdown

sequences, setting of battery thresholds,

etc.). See "communication" section for

further details;

cSolution-PacTM is a CD-ROM which

contains all the tools needed to supervise

your UPS.

cSimply download the EX driver utility from

the CD and Solution-Pac. The UPS must be

serialy connected to a Windows PC.

MGE UPS SYSTEMS Pulsar EX

Rack

: 86-153522-00 iii

options

cUM Sensor environment measurement

unit: compatible with SNMP or Solution

PacTM, this unit measures the temperature

and the relative humidity in the room where

the Pulsar is installed. Eight relay contacts

are provided to transmit signals to an

administration platform, in the form of

voltage free contacts to enable monitoring of

(fire alarm, climate control fault, intrusion,

etc.);

cbattery extension module: Pulsar

EXB10

Rack

/EXB15 battery extension

modules lengthen the battery time of the

Pulsar EX10

Rack

/EX15

Rack

to meet your

requirements. For rack installation of EXB15

order 19" rack kit P/N 8806U.

additional communications

options:

cSNMP administration: MGE has the

most complete offering for the administration

of a group of UPSs using the SNMP protocol

with different network-connection modules

(SNMP card or proxy software), supervision

modules (application for NMS platforms

such as HP OpenView or C.A. UNICENTER

TNG) and a file-closing module (UM Client).

cSNMP card: this card, inserted into your

UPS, can establish a direct Ethernet network

connection for your UPS. It can then be

temporarily managed using SNMP or the

various software modules of Solution-Pac.

The MGE UPS SYSTEMS offering complies

with RFC 1628 specifications (IETF) and

was certified by the InterWorking Labs

during the Test Summit in June 1994;

cstatus information card: this option

provides you with 5 voltage-free contacts: on

battery, on by-pass, low battery, load on

UPS. This card can be used with the UPS

driver of IBM AS/400.

Contact your dealer for further information

on these options.

iv Pulsar EX

Rack

: 86-153522-00 MGE UPS SYSTEMS

software supplied with

Pulsar EX10

Rack

and

EX15

Rack

To meet the different operating

environments of your UPS, Pulsar EX

Rack

includes 2 MGE UPS SYSTEMS software

programs:

cEX-Driver software for Windows;

cNetwork based Solution-PacTM power

management software.

EX-Driver for Windows

EX Driver for Windows provides

communication with the UPS from a simple

Windows workstation. EX-Driver is

compatible with Windows 3.1x and Windows

95/98, for communication with the UPS via a

serial connection for various needs:

cpersonalization of the UPS operating

mode: the EX-Tuner utility, can be used to

change certain UPS operating parameters if

the standard factory settings are not ideal for

the operating conditions.

It is possible to modify the output voltage,

battery-test frequency, startup and shutdown

sequences, operation of automatic by-pass,

etc.;

Solution-PacTM for networks and

multi-server systems

Protection by UPS is only complete and

effective if combined with powerful software

functions which warn users and the operator

of any power supply problem, automate

system shutdown, supervise and remotely

control the UPSs. MGE UPS SYSTEMS

created Solution-PacTM for this purpose.

Solution-PacTM combines all these functions

in a single CD-ROM, usable in local or

remote mode (TCP/IP and SNMP), and

covering the main network environments.

Solution-PacTM is the ideal solution for

protecting networks and multiserver

systems.

Solution-PacTM on a single CD-ROM

contains everything needed to safeguard

one or more systems and to supervise one

or more UPSs from a local or remote station.

Solution-PacTM includes SNMP proxy

agents, system shutdown software, and

supervision software.

Solution-PacTM is a powerful and upgradable

software tool which provides all the

supervision, control and safety functions

associated with a UPS:

vgraphic display of the UPS,

vremote control of the UPS and output

receptacles,

vuser alarm of problems,

vrecording of events in log files,

vautomatic system shutdown and restart,

vlocal or remote supervision of UPSs and

ancillary devices,

vtransmission of UPS information and

alarms to any SNMP supervisor.

vpaging / e-mail capabilities

vmultiple server shutdown in

heterogeneous environment.

Platforms supported:

Windows 3.1, 95, 98, NT, Novelle Netware,

OS/2, Linus, Mac/OS, Sun Solaris, HP/UX,

IBM Aix, Dec Unix and Open VMS, Silicon

Graphics, IRIX.

Pulsar EX10

Rack

/ EX15

Rack

/ EXB10

Rack

/ EXB15 presentation

general contents

Pulsar presentation............................................................................................................................. 3

getting started / operation....................................................................................................... 11

Pulsar EX

Rack

: 86-153522-00

MGE UPS SYSTEMS 12

Pulsar EX

Rack

: 86-153522-00MGE UPS SYSTEMS

3MGE UPS SYSTEMS 4MGE UPS SYSTEMS

Pulsar EXB10

Rack

rear view

Pulsar EX10

Rack

: 86-153522-00 Pulsar EX10

Rack

: 86-153522-00

Pulsar EX10

Rack

EX15

Rack

front view

Pulsar EX10

Rack

EX15

Rack

rear view

1f 1e

…

–

…

………

MGE UPS SYSTEMS

ATTN: CUSTOMER SUPPORT SERVICES

1660 SCENIC AVENUE

COSTAMESA, CA 92626

PLACE

STAMP

HERE

The indispensable

companion

sofware

for your UPS

L'indispensable

complément

logiciel

de votre onduleur

solution-pac 98

BATTERYCONNECTOR

Volt:36Vdc = 20A

21 22 20

DC BREAKER

30A 65Vdc

I O

Volt:36Vdc = 20A

BATTERYCONNECTOR

U-Talk

710 811

6a 6b

Vac IN

MGE UPS SYSTEMS Pulsar EX

Rack

: 86-153522-00 5

key to diagrams

2 "function" button: switches off audio

warning device or measures load

charge percentage (if utility power

present),

3 "ON/OFF" switch:

button pushed in: ON

button not pushed in: OFF,

4 input receptacle,

5 input cord (supplied, with ferrite for

Pulsar EX15

Rack

)

6 input fuse receptacle,

6a input fuse:

T 15A/125V for Pulsar EX10

Rack

T 20A/125V for Pulsar EX15

Rack

6b fuse holder,

7 output receptacles for connection of

computer loads to Pulsar EX

Rack

8 site wiring fault LED,

9 rating label,

yellow indicator LEDs 1a to 1d flashing

quickly:

1a overload,

1b device fault,

1c battery fault,

1d operating on bypass (fault tolerant

mode),

yellow indicator LEDs 1a to 1d on

continuously or flashing slowly: indicate

the battery charge level (if utility power

present) or remaining battery time (if no

utility power present). They may be on

continuously or flash slowly during a

transition period. By pressing the button

marked "function" 2when utility power is

present, they indicate the load charge level.

1e green indicator LED flashing: operating

on battery,

1f green indicator LED on continuously:

load powered by UPS,

green indicator light off: load no

10 fan,

11 SUB-D 9 pin connector for RS232

communication port,

12 cover for optional communication cards,

13 connector for Pulsar EXB10

Rack

EXB15 battery extension module,

14 warranty card,

17 Solution-PacTM ,CD-ROM, EX Drive,

18 RS232 cable,

19 Pulsar EXB10

Rack

/EXB15 battery

extension module,

20 battery circuit-breaker,

21 connector to Pulsar EX10

Rack

EX15

Rack

22 connector for second Pulsar

EXB10

Rack

/EXB15 battery extension

module,

23 battery connection cord.

6P-ulsar EX

Rack

: 86-153522-00 MGE UPS SYSTEMS

technical data

coutput power:

vPulsar EX10

Rack

: 1000VA/700W

vPulsar EX15

Rack

: 1500VA/1050W

cinput voltage:

vPulsar EX10

Rack

voltage (V): a 80V to 138V single phase (60V to 138V at 1/3 Power, 70V to 138V at 2/3 Power)

vPulsar EX15

Rack

voltage (V): a 90V to 138V single phase (70V to 138V at 1/3 Power, 80V to 138V at 2/3 Power)

vfrequency (F): 47Hz to 53Hz or 57Hz to 63Hz

cbattery:

vtype :

maintenance free sealed lead-acid Pulsar EX10

Rack

: 3 x 12V - 7.2Ah

Pulsar EX15

Rack

: 4 x 12V - 7.2Ah

note: battery life (4 or 5 years) is halved every 10°C above 25°C

coutput specifications:

vvoltage (V): single phase 120V ±3% (can be adjusted from 100 to 127V using EX Driver)

vfrequency (F): 50/60Hz ±0.5% (frequency configuration using EX Driver)

cenvironment:

vnoise level: ≤40dBA (Pulsar EX10

Rack

) or ≤50dBA (Pulsar EX15

Rack

) for operation on utility power

≤45dBA (Pulsar /EX10

Rack

) or ≤50dBA (Pulsar EX15

Rack

) for battery backup mode

voperating temperature: 0 to 35°C

vrelative humidity: 0 to 90%

non condensing

cdimensions and weights: Pulsar EX10

Rack

Pulsar EX15

Rack

Pulsar EXB10

Rack

vheight H (inches): 3.46 3.46 3.46

vwidth W (inches): 19 19 19

vdepth D (inches): 16.25 19.5 16.25

vweight lbs (kg) : 37 (17) 51 (23) 48 (22)

–+

/ a

H/2U

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Unión Postal Universal de MGE UPS Systems

MGE UPS Systems

MGE UPS Systems Pulsar EXtreme 1500C Manual de usuario

MGE UPS Systems

MGE UPS Systems Comet EXtreme CLA 12 kVA Manual de usuario

MGE UPS Systems

MGE UPS Systems Pulsar ES 5+ Manual de usuario

MGE UPS Systems

MGE UPS Systems 250A Manual de usuario

MGE UPS Systems

MGE UPS Systems EPS 6000 Manual de usuario

MGE UPS Systems

MGE UPS Systems Comet EXtreme CLA Manual de usuario

MGE UPS Systems

MGE UPS Systems UPS 500 Manual de usuario

MGE UPS Systems

MGE UPS Systems Evolution 2000 RT 2U Manual de usuario

MGE UPS Systems

MGE UPS Systems Evolution S 1250 RT 2U Manual de usuario

MGE UPS Systems

MGE UPS Systems EPS 7000 Manual de usuario

MGE UPS Systems

MGE UPS Systems Comet Series Manual de usuario

MGE UPS Systems

MGE UPS Systems Pulsar Evolution 1500 Manual de usuario

MGE UPS Systems

MGE UPS Systems Pulsar EXtreme 2200C Manual de usuario

MGE UPS Systems

MGE UPS Systems EX 5 Manual de usuario

MGE UPS Systems

MGE UPS Systems Galaxy 3000 Manual de usuario

MGE UPS Systems

MGE UPS Systems Evolution 850 Rack 1U Manual de usuario

MGE UPS Systems

MGE UPS Systems Ellipse max 1500 Manual de usuario

MGE UPS Systems

MGE UPS Systems PULSAR EVOLUTION 3000 XL Manual de instrucciones

MGE UPS Systems

MGE UPS Systems Pulsar ellipse 300 Manual de usuario

MGE UPS Systems

MGE UPS Systems Pulsar EX20 Manual de usuario

MGE UPS Systems

MGE UPS Systems Pulsar Evolution 1100 Manual de usuario

MGE UPS Systems

MGE UPS Systems Pulsar M 3000 RT 3U XL Manual de usuario

MGE UPS Systems

MGE UPS Systems 11+ Manual de usuario

MGE UPS Systems

MGE UPS Systems Pulsar ESV 11+Rack Manual de usuario

Manuales populares de Unión Postal Universal de otras marcas

Pylontech

Pylontech Victron & Pylontech US5000 Manual de usuario

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Manual de usuario

Mecer

Mecer ME-1000-WTU Manual de usuario

Mustek

Mustek PowerMust 530(B) Plus Manual de instalación y operación

Emerson

Emerson Liebert NXL series Manual de usuario

MAKELSAN

MAKELSAN BOXER SERIES Manual de usuario

Block

Block PC-0524-400-0 Manual de usuario

CyberPower

CyberPower CP585LCD Manual de usuario

Eaton

Eaton 3S Instrucciones de montaje

CyberPower

CyberPower Office Tower Series UPS 1000 Manual de usuario

CyberPower

CyberPower BM100 Manual de usuario

Best Power

Best Power 610 Manual de usuario

Best Power

Best Power Unity/I UT3K Manual de usuario

Mustek

Mustek PowerMust 400 Offline Manual de usuario

Xantrex

Xantrex Trace 512 UR-UPS Manual de usuario

Forza

Forza SL-1501UL Manual de usuario

LEGRAND

LEGRAND keor 310081 Manual de usuario

ABB

ABB Conceptpower DPA 500 Manual de usuario