MGE UPS Systems Evolution 2000 RT 2U Manual de usuario

34003641FR/AA - Page 1

www.mgeups.com

Installation and user

manual

Evolution

S 1250 RT 2U

S 1750 RT 2U

2000 RT 2U

S 2500 RT 2U

S 3000 RT 2U

S 3000 RT 3U

S EXB 1250/1750 RT 2U

S EXB 2500/3000 RT 2U

S EXB 2500/3000 RT 3U

34008236EN/AA - Page 2

34008236EN/AA - Page 3

Introduction

Environmental protection

MGE UPS SYSTEMS has implemented an environmental-protection policy.

Products are developed according to an eco-design approach.

Substances

This product does not contain CFCs, HCFCs or asbestos.

Packing

To improve waste treatment and facilitate recycling, separate the various packing components.

◗The cardboard we use comprises over 50% of recycled cardboard.

◗Sacks and bags are made of polyethylene.

◗Packing materials are recyclable and bear the appropriate identification symbol .

Follow all local regulations for the disposal of packing materials.

End of life

MGE UPS SYSTEMS will process products at the end of their service life in compliance with local regulations.

MGE UPS SYSTEMS works with companies in charge of collecting and eliminating our products at the end of their service life.

Product

The product is made up of recyclable materials.

Dismantling and destruction must take place in compliance with all local regulations concerning waste.

At the end of its service life, the product must be transported to a processing centre for electrical and electronic waste.

Battery

The product contains lead-acid batteries that must be processed according to applicable local regulations concerning

batteries.

The battery may be removed to comply with regulations and in view of correct disposal.

The "Material Safety Data Sheets"(MSDS) for the batteries are available on our web site*.

(*) For more information or to contact the Product Environmental manager, use the "Environmental Form"on the site:

www.mgeups.com -> About us -> Environment.

Thank you for selecting an MGE UPS SYSTEMS product to protect your electrical equipment.

The Evolution range has been designed with the utmost care.

We recommend that you take the time to read this manual to take full advantage of the many features of your UPS

(Uninterruptible Power System).

Before installing Evolution, please read the booklet presenting the safety instructions. Then follow the indications in this

manual.

To discover the entire range of MGE UPS SYSTEMS products and the options available for the Evolution range, we invite

you to visit our web site at www.mgeups.com or contact your MGE UPS SYSTEMS representative.

Material Abbreviation Number

in the symbol

Polyethylene terephthalate PET 01

High-density polyethylene HDPE 02

Polyvinyl chloride PVC 03

Low-density polyethylene LDPE 04

Polypropylene PP 05

Polystyrene PS 06

34008236EN/AA - Page 4

Introduction

Pictograms

Important instructions that must always be followed.

Information, advice, help.

Visual indication.

Action.

Audio signal.

In the illustrations on the following pages, the symbols below are used:

LED off

LED on

LED flashing

34008236EN/AA - Page 5

Contents

1. Presentation

1.1 Standard positions ...................................................................................................................... 6

Tower position................................................................................................................................ 6

Rack position ................................................................................................................................. 6

1.2 Rear panels................................................................................................................................... 7

Evolution 2500 / 3000 .................................................................................................................... 7

Evolution 1250 / 1750 / 2000 ......................................................................................................... 7

Evolution EXB (optional battery module) ....................................................................................... 7

1.3 Control panel................................................................................................................................7

2. Installation

2.1 Unpacking and contents check .................................................................................................. 8

2.2 Installation in tower position ...................................................................................................... 9

2.3 Installation in rack position ........................................................................................................ 9

2.4 Communication ports................................................................................................................ 10

Connection of RS232 or USB communication port (optional)...................................................... 10

Installation of the communication cards (optional)....................................................................... 10

Characteristics of the contact communication port (optional) ...................................................... 10

2.5 Connections with a FlexPDU (Power Distribution Unit) module ................................................11

2.6 Connections with a HotSwap MBP module..............................................................................11

HotSwap MBP module operation................................................................................................. 12

2.7 UPS connection without a FlexPDU or HotSwap MBP module ............................................. 12

3. Operation

3.1 Start-up and normal operation ................................................................................................. 13

3.2 Operation on battery power...................................................................................................... 13

3.3 Return of AC input power ......................................................................................................... 14

3.4 UPS shutdown............................................................................................................................ 14

3.5 UPS remote-control functions.................................................................................................. 14

4. Personalisation using external software........................................................................... 16

5. Maintenance

5.1 Troubleshooting......................................................................................................................... 17

Troubleshooting a UPS equipped with the HotSwap MBP module ............................................. 17

5.2 Battery-module replacement .................................................................................................... 18

Safety recommendations ............................................................................................................. 18

Battery-module removal............................................................................................................... 18

Mounting the new battery module................................................................................................ 19

5.3 Maintenance on a UPS equipped with the HotSwap MBP module........................................ 19

5.4 Training centre ........................................................................................................................... 19

6. Appendices

6.1 Technical specifications............................................................................................................ 20

6.2 Glossary ..................................................................................................................................... 21

34008236EN/AA - Page 6

1. Presentation

1.1 Standard positions

Tower position

Rack position

Dimensions (W x H x D)

in mm

S 1250 RT 2U

S 1750 RT 2U

2000 RT 2U

440 x 86 x 509

S 2500 RT 2U

S 3000 RT 2U

440 x 86 x 634

S 3000 RT 3U 440 x 131 x 484

S EXB 1250/1750 RT 2U

440 x 86 x 509

S EXB 2500/3000 RT 2U

440 x 86 x 634

S EXB 2500/3000 RT 3U

440 x 131 x 484

Weights in kg

S 1250 RT 2U 24.3

S 1750 RT 2U 26.6

2000 RT 2U 25.7

S 2500 RT 2U 33.8

S 3000 RT 2U 33.8

S 3000 RT 3U 34.3

S EXB 1250/1750 RT 2U

30.4

S EXB 2500/3000 RT 2U

41.5

S EXB 2500/3000 RT 3U

41.7

34008236EN/AA - Page 7

1. Presentation

1.2 Rear panels

Evolution S 2500 / S 3000

Evolution S EXB (optional battery module)

1.3 Control panel

(1) USB communication port

(2) RS232 communication port

(3) Connector for automatic recognition of an

additional battery module

(4) Slot for optional communication card

(5) Connector for ROO (remote ON/OFF) or

RPO (Remote Power Off) control

(6) Connector for additional battery module

(except Evolution 2000)

(7) 16 A outlet for connection of equipment

(8) Two groups of 2 programmable outlets for

connection of equipment

(9) Groups of 4 outlets for connection of

equipment

(10) Socket for connection to AC-power

source

Evolution S 1250 / S 1750 / 2000

(12) Connectors for battery modules (to the

UPS or to the other battery modules)

(13) Connectors for automatic recognition of

battery modules

(20) Bargraph indicating the percent load

(21) Bargraph indicating battery charge level

(22) Programmable outlets 1 are supplied

with power

(23) Programmable outlets 2 are supplied

with power

(24) Lighted ON/OFF button for outlets

(25) Load protected LED

(26) Downgraded operation LED

(27) Load not protected LED

3 7

9 104 5

94 5

1312 12

23 24 25 26 27

0-25%

26-50%

51-75%

76-100%

34008236EN/AA - Page 8

2. Installation

2.1 Unpacking and contents check

(30) Evolution UPS

(31) connection cable to AC-power source (Evolution S

2500 and S 3000 models only)

(32) 2 connection cables for the protected equipment

(33) RS232 communication cable

(34) USB communication cable

(35) 2 systems to secure power plugs

(36)Solution-Pac CD-ROM

(37) Documentation

(38) Mounting kit for 19-inch bays

Elements supplied depending on the version or optional

(39) 2 supports for the upright position (RT 2U version only)

(40) FlexPDU module (optional)

(41) connection cable between FlexPDU module and UPS

(42) NMC communication card (optional, standard on Netpack

versions)

(43) HotSwap MBP module (optional)

(44) connection cables between HotSwap MBP module and

UPS

Packing materials must be disposed of in compliance with all local regulations concerning waste.

Recycling symbols are printed on the packing materials to facilitate sorting.

36 37

On = Link

Blink = Act 66102

UPS data RS232

Settings/Sensor

100M 10M

E HERNE

34008236EN/AA - Page 9

2. Installation

2.2 Installation in tower position

2.3 Installation in rack position

It is advised to first install the battery module, then the power module above.

Note. The two supports for the upright position are used on the RT 2U version only.

Follow steps 1 to 4 for module mounting on the rails.

The rails and necessary hardware are supplied by MGE UPS SYSTEMS.

34008236EN/AA - Page 10

2. Installation

2.4 Communication ports

Connection of RS232 or USB communication port (optional)

Installation of the communication cards (optional, standard on the Netpack versions)

Characteristics of the contact communication port (optional)

The RS232 and USB communication ports cannot operate simultaneously.

1 - Connect the RS232 (33) or USB (34)

communication cable to the serial or USB

port on the computer equipment.

2 - Connect the other end of the

communication cable (33) or (34) to the USB

(1) or RS232 (2) communication port on the

UPS.

The UPS can now communicate with MGE

UPS SYSTEMS power management

software.

Limited-access slot for the

communication card

It is not necessary to shutdown the UPS

before installing a communication card.

1 - Remove the slot cover (4) secured by

screws.

2 - Insert the communication card in the slot.

3 - Secure the card cover with the 2 screws.

◗◗Pins 1, 3, 4, 5, 6, 10: not used

◗Pin 2: common (user)

◗Pin 7: low battery

◗Pin 8: operation on battery power

◗Pin 9: UPS ON, equipment supplied

n.o.: normally open contact

When a signal is activated, the contact is closed between the common (pin 4) and the pin for the corresponding signal.

Contact characteristics (optocoupler)

◗Voltage: 48 V DC max

◗Current: 80 mA max

◗Power: 3.84 W

11023456

commun

n.o. n.o. n.o.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Unión Postal Universal de MGE UPS Systems

MGE UPS Systems

MGE UPS Systems 4000 RT Manual de usuario

MGE UPS Systems

MGE UPS Systems Pulsar TM 30 Manual de usuario

MGE UPS Systems

MGE UPS Systems 2200 RT 2U Manual de usuario

MGE UPS Systems

MGE UPS Systems Galaxy PW 30 kVA Manual de usuario

MGE UPS Systems

MGE UPS Systems Pulsar MX ModularEasy Manual de instalación

MGE UPS Systems

MGE UPS Systems 250A Manual de usuario

MGE UPS Systems

MGE UPS Systems Evolution 850 Rack 1U Manual de usuario

MGE UPS Systems

MGE UPS Systems PowerServices TelPac Manual de usuario

MGE UPS Systems

MGE UPS Systems 2000 Manual de usuario

MGE UPS Systems

MGE UPS Systems Pulsar EXtreme 2200C Manual de usuario

MGE UPS Systems

MGE UPS Systems Ellipse max 1500 Manual de usuario

MGE UPS Systems

MGE UPS Systems Pulsar EXtreme CLA 2000 VA Manual de usuario

MGE UPS Systems

MGE UPS Systems PULSAR 1000 Manual de usuario

MGE UPS Systems

MGE UPS Systems Pulsar Evolution 1100 Tower Manual de usuario

MGE UPS Systems

MGE UPS Systems Esprit 3 Manual de usuario

MGE UPS Systems

MGE UPS Systems 2200 RT 2U Manual de usuario

MGE UPS Systems

MGE UPS Systems EPS 6000 Manual de usuario

MGE UPS Systems

MGE UPS Systems EX 11RT Manual de usuario

MGE UPS Systems

MGE UPS Systems Pulsar EXtreme 1500 Manual de usuario

MGE UPS Systems

MGE UPS Systems Pulsar ESV 11+Rack Manual de usuario

MGE UPS Systems

MGE UPS Systems Pulsar ellipse 300 Manual de usuario

MGE UPS Systems

MGE UPS Systems Pulsar EX20Rack Manual de usuario

MGE UPS Systems

MGE UPS Systems EPS 6000 Manual de usuario

MGE UPS Systems

MGE UPS Systems Pulsar Evolution 1500 Manual de usuario

Manuales populares de Unión Postal Universal de otras marcas

Pylontech

Pylontech Victron & Pylontech US5000 Manual de usuario

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Manual de usuario

Mecer

Mecer ME-1000-WTU Manual de usuario

Mustek

Mustek PowerMust 530(B) Plus Manual de instalación y operación

Emerson

Emerson Liebert NXL series Manual de usuario

MAKELSAN

MAKELSAN BOXER SERIES Manual de usuario

Block

Block PC-0524-400-0 Manual de usuario

CyberPower

CyberPower CP585LCD Manual de usuario

Eaton

Eaton 3S Instrucciones de montaje

CyberPower

CyberPower Office Tower Series UPS 1000 Manual de usuario

CyberPower

CyberPower BM100 Manual de usuario

Best Power

Best Power 610 Manual de usuario

Best Power

Best Power Unity/I UT3K Manual de usuario

Mustek

Mustek PowerMust 400 Offline Manual de usuario

Xantrex

Xantrex Trace 512 UR-UPS Manual de usuario

Forza

Forza SL-1501UL Manual de usuario

LEGRAND

LEGRAND keor 310081 Manual de usuario

ABB

ABB Conceptpower DPA 500 Manual de usuario