MFJ MFJ-852 Manual de usuario

MFJ-852 Instruction Manual AC Line Noise Meter

INTRODUCTION

Congratulations on purchasing the MFJ-852 AC Line Noise Meter. Like

professional RFI trackers used by utility companies, your MFJ-852 leads you to

trouble spots fast. Here are some important features:

VHF Design: The MFJ-852 operates at 135 MHz where antenna length is short,

on-air interference is minimal, and RFI is localized easily for accurate tracking.

Wideband IF: 100 kHz IF bandwidth provides optimized noise sampling.

1 uV Sensitivity: Picks up all noise signatures, weak or strong.

Semi-Log Metering: Semi-log metering system covers a wide signal range

without the need for add-on step attenuators.

Balanced Antenna: Built-in collapsible dipole is decoupled from case

electronics and headphone leads to deliver a clearly-defined null. Locates RFI

sources easily.

Audio Jack: Plug in stereo or mono type headphones for audible monitoring, or

connect a portable cassette recorder to make sound recordings for later analysis.

Many powerline faults have identifiable noise signatures that experienced

powerline technicians can identify easily--even over the phone!

Battery Indicator: LED power indicator also monitors battery status--let's you

know when it's time to replace the battery before the meter stops working

properly.

Tracks Many Types of RFI: In addition to transmission line noises, the MFJ-

852 also ferrets out residential and industrial noise sources such as electric fence

arcs, sparking power equipment, poorly suppressed specialty lighting, and much

more. Give your claims added credibility by showing the owners of defective

equipment where the problem is being generated--and letting them hear what it

actually sounds like!

Fully Portable: Compact hand-held size and built-in battery power let you to

explore freely in search of trouble spots.

Always Available: Many power-related noise problems are intermittent and

rarely occur when power company engineers are in the neighborhood with the

RFI truck. With the MFJ-852, you can capture the data you need instantly--

when its happening!

Be a detective and put the fun back into Ham Radio! In addition to solving

problems in your own neighborhood, this is a great way to lend assistance to

friends or fellow club members who are having problems of their own. When

MFJ-852 Instruction Manual AC Line Noise Meter

power companies get a concise description of the noise and a specific pole

number, you get much faster service!

SPECIFICATIONS

Operating Frequency: 135 MHz (internally tunable)

Receiver Sensitivity: .3 uV for audible detection

Meter Sensitivity: <2 uV for usable deflection

Meter Range: 50 dB, semi-log response

Receiver IF Bandpass: 100 kHz

Audio Output: Fixed, headphone level (line level for record)

Power Source: Self-contained, 9 volt flatpack battery

Current Drain: 30 mA

Antenna: Choke-balun-decoupled collapsible dipole

CONTROLS AND LOCATIONS

MFJ-852

Power

AC Power-Line

Monitor

1. Collapsible Antenna: Extend full length for maximum sensitivity and best

directivity. Best pick-up sensitivity is obtained when dipole is broadside to

the source. A pronounced null is obtained when dipole is 90-degrees to the

MFJ-852 Instruction Manual AC Line Noise Meter

source. Length may be shortened to reduce sensitivity for extremely strong

RFI sources.

2. Headphone Jack: Connect standard stereo or monaural type headphones

using a 3.5 mm plug. Also, the headphone jack may be used to feed a

portable cassette recorder (line-level input)--or even a portable oscilloscope

for complex waveform analysis.

3. Power Switch: Press in to apply power to unit.

4. Power/Battery LED: Illuminates when power is applied, extinguishes when

battery voltage drops to a marginal level.

5. Meter: Semi-log metering system displays wide signal range with more

resolution at the low end of the scale.

HUNTING DOWN NOISE ON THE POWER LINES

Most utility-line noises comes from arcing or corona. Arcing (or sparking)

happens when 60 Hz AC swings to its extreme plus or minus value. This can

induce voltage in associated wiring and hardware that arcs across an imperfect

insulating medium. The resulting RFI often appears as a 120 Hz AM modulated

buzz or hum. Corona happens when a discharge occurs in ionized air rather than

through a discharge path to ground. Corona may produce a more constant noise,

frying, or even a high-pitched whine.

120 Hz Buzz

Off-Air RFI60-Hz

Energy on

AC line

+Arc

Arc

The distance powerline RFI propagates usually drops rapidly as monitoring

frequency increases. A noise that's received for a mile or more in the AM

broadcast band may only be detectable for a hundred feet or so at 130 MHz.

That's why utility companies use handheld VHF-AM receivers instead of HF

radios to zero in on line noise problems.

Distance from Fault

10 MHz130 MHz

RFI

Strength 1 MHz

MFJ-852 Instruction Manual AC Line Noise Meter

Due to standing waves, RFI varies in intensity along the powerline. This makes

precise tracking at HF nearly impossible. However, near the fault, HF peaks

occur progressively closer together and amplitude becomes more constant,

signaling a "ballpark" location.

Use car's AM radio to find general area. Use MFJ-852 to find the exact source.

RFI Intensity

A good way to track residential RFI is to tune your car's AM radio to an open

channel near the high end of the band. Drive around the affected area looking

for a location where the RFI seems to peak up and hold relatively constant.

When you find a "getting-warm" zone, get out of the car and use the MFJ-852 to

look for a source (usually a specific pole). You should see (or hear) a null in the

RFI noise when the antenna tip is pointed at the source. If possible, get out from

under overhead wires and well off to one side to pinpoint source. When you

think you've isolated the source, write down the pole number.

Occasionally, the RFI source may be visible from the ground (a branch on wire,

etc), or audible (a buzzing or frying sound). At night, corona or sparking may be

visible, as well.

A null occurs when

the end of the antenna

points at the RFI source.

Occassionally, the cause of the RFI

will be obvious. Usually, however, it isn't!

Power lines are made up from a large inventory of hardware and individual

components, any one of which may eventually loosen or fail. Cracked

insulators, loose bonding wires, corroded hardware, unbonded switches, open

ground wires, damaged lightning arrestors, and defective line fuses are just a few

causes! Also, weather (especially wind and humidity) may be an important

contributing factor. For example, corona more likely occurs in damp weather,

while arcing is more common in dry or windy conditions. Many utility-company

MFJ-852 Instruction Manual AC Line Noise Meter

RFI technicians are skilled at identifying specific problems by the noise

signature they generate, which is why we recommend making a cassette

recording of the noise. For a fast power company response, always report the

following:

1. Pole Number: (123 over 13, etc.) and a general street location.

2. Description of RFI noise: (buzz, whine, frying, sporadic bursts, etc).

3. Weather condition : (dry/damp, windy/calm, hot/cold, etc).

4. Special features on the pole: (big transformer, branch lines, guy wires, etc.).

Occasionally, identifying a specific pole may prove difficult for the layman RFI

hunter due to multiple faults or other complicating factors. If you can't trace a

RFI source to a specific pole, record a representative pole number in the zone--

and report the fault as "in the vicinity of" that pole number. Utility companies

work by street name and pole number when trouble-shooting, and they'll need

this information even if it isn't exact.

Important Note: It's both illegal and extremely dangerous to tamper with

utility poles and powerline transmission equipment!

We've all heard grizzly tales of the old-timer who bashed a pole with a sledge

hammer or shook guy wires violently to cure his noise problem. Please don't

attempt this--ever! Power companies warn that pole-bashing may damage

preservative coatings, fracture sensitive components, and loosen hardware--

sometimes causing metal parts or energized lines to fall on the basher! Also,

most power poles also support sensitive telephone and TV-cable transmission

equipment that may be harmed. If you tamper with any of it, you may be subject

to stiff criminal penalties--plus held libel for any resultant damage (which could

be substantial). The best--and safest--rule of thumb is "look-but-don't-touch"!

NOISE FROM OTHER SOURCES

Not all RFI in your neighborhood may be caused by the utility company's

transmission equipment. In many cases, electrical noise can be traced directly to

a customer. Once electricity crosses the transom into a commercial business or

private residence, responsibility for the problem is usually beyond the power

company's control!

Tracking down the source of end-user RFI is much the same as searching the

powerlines for faults. Induced RFI travels through the customer's entrance

MFJ-852 Instruction Manual AC Line Noise Meter

service and out onto the powerline at HF frequencies. When possible, use your

car's AM radio to find the general area, then localize the source with your MFJ-

852. For this type of noise, the source is usually located in a building rather than

up a pole. RFI may be especially strong around the building's entrance cable and

meter.

RFI Radiated at Source

RFI Induced Along Powerline

The noise signatures generated by customer-owned equipment may sound

different than utility-generated sounds--mostly because the source is different.

Popular culprits include heliarc welders, lighting using RF, mercury-vapor, or

fluorescent fixtures, dimmers, industrial brush-type motors, switched power

supplies and control systems, MRI or x-ray machines, poorly-shielded computer

networks, electric fencing, and even defective heating pads or electric blankets.

The trained ear of a utility company specialist may prove helpful in making a

positive identification, even if it's not their equipment causing the problem.

Honey Works Better than Vinegar:

Most commercial or residential property owners don't want to hear about

"harmful interference" problems that might costs money to repair. As the bearer

of bad news, it's up to you to put a positive spin on the need for correction and

remedy. This means showing them the source, letting them listen to what it

sounds like, explaining FCC guidelines pertaining to harmful interference, and

conveying your concern that severe RFI is often symptomatic of dangerous in-

house electrical hazards. Courtesy and specific technical information are always

the best tools for winning cooperation. If your initial approach doesn't work,

more punitive options are available. One of your best resources may be the

ARRL's Regulatory Information Branch at their headquarters in Newington, CT.

Also, The ARRL RFI Book (ARRL), and the Interference Handbook (Radio

Amateur Callbook), are instructive references that are on sale in most ham

stores.

MFJ-852 Instruction Manual AC Line Noise Meter

THEORY OF OPERATION

The MFJ-852 is a single-frequency broadband AM receiver operating in the 135

MHz region. RFI signals are picked up by a built-in ½ wave dipole antenna that

is decoupled from the receiver PC board by a choke-style balun. Image rejection

is provided by bandpass filter L1/L2, and preamplifier Q1 boosts signals by

approximately 20 dB prior to mixer stage U1. U1 also contains the receiver's

local oscillator, which operates at approximately 124.3 MHz. The 10.7 MHz IF

filter FL1 sets the message channel bandwidth at around 100 kHz, and IF pre-

amplifier Q1 boosts signals prior to IF amplifier/AGC gate U2. U2 provides up

to 50 dB gain on weak signals, and delivers a 70 dB measurement range for

signal input levels exceeding 2 uV in strength. A diode AM detector

simultaneously demodulates noise signals and generates a DC level for AGC

control. This composite energy is amplified by op-amp U3a. The AF

component is routed to the receiver's headphone monitoring circuit, and the DC

component is routed to U3b where it is amplified and re-biased to drive the AGC

input of U2. The AGC line also drives the receiver's semi-log signal-strength

indicator meter.

BPF Q1 Q2

U1 U2 Det U3a

MU3bLocal

Osc

RF Amp Mxr/Osc IF IF/AGC Det Amp

ALC

RFI Level

Phones

Antenna

IN CASE OF DIFFICULTY

Your meter has few internal adjustments and is a trouble-free design. However,

it has a sensitive electro-mechanical meter that may sustain damage if dropped.

Also, the MFJ-852 is not "weatherproof", and should not be exposed to heavy

rain, snow, or other harsh environmental conditions. If you experience a

problem, look through the checklist below to determine if it's something simple

you can fix yourself.

Fails to Power Up: Check battery condition.

MFJ-852 Instruction Manual AC Line Noise Meter

Erratic Operation: Check battery condition--is LED illuminating?

Chronic Interference from Aircraft or Wx-Satellite Signals: Retune L3

slightly.

Noisy or Intermittent Audio: Check headphone wires, plug.

TECHNICAL ASSISTANCE

If you have any problem with this unit first check the appropriate section of this

manual. If the manual does not reference your problem or your problem is not

solved by reading the manual you may call MFJ Technical Service at 662-323-

0549 or the MFJ Factory at 662-323-5869. You will be best helped if you have

your unit, manual and all information on your station handy so you can answer

any questions the technicians may ask.

You can also send questions by mail to MFJ Enterprises, Inc., 300 Industrial

Park Road, Starkville, MS 39759; by Facsimile to 662-323-6551; or by email to

techinfo@mfjenterprises.com. Send a complete description of your problem, an

explanation of exactly how you are using your unit, and a complete description

of your station.

MFJ-852 Instruction Manual AC Line Noise Meter

SCHEMATIC

Tabla de contenidos

Otros manuales de Instrumento de medición de MFJ

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario