RC-821 Name of Each Part
Transmitter
Channel Matching
Function Introduction
RC-821
Thanks for purchasing our Meyin products RC-821. This is
high preformance wireless shutter remote product. It can
remote control the camera to Single shooting, Continuous
shooting, BULB, Delay shooting, 3s Delay shooting etc.
RC-821 is using global free wireless channel 2.4GHz and
the FSK frequence which made RC-821 work more stable.
1PC
RC-821 Transmitter
1PC
RC-821 Receiver
Shutter Connecting Cable
Please check the package included all the above parts
after open and contact with our distributor if any missing
parts.
1
2
3
4
Receiver
7
8
9
10
11 12
6
1Indicator
2Shutter Button
33sec Delay Shoot
4Channel Matching Button
5Battery Case
6Indicator
7Shutter
Matching Button
/Channel
8Power Switch Button
9Battery Case
10 The Locking Wheel
11 Hot Shoe Foot
12 3.5mm Socket
1.Please press and hold the channel matching button of
the transmitter then release the button when the
indicator light twinkle as red and blue. At this moment,
the transmitter released its' unique frequence to
receiver.
2.Make sure the receiver stays power off then fully press
channel matching button and power switch button.
Release those button when the receiver indicator light
twinkle as red and blue and the auto channel matching
is processing. The indicator light will stop twinkle and
the receiver power off when finish the channel
matching.
3.Press and hold the transmitter channel matching
button, then the transmitter indicator light will stop
twinkle. Power on the receiver again to finish the
channel matching.
MSM021 V10.01
3sec Delay Shooting Mode
1. Set camera mode as [ ]
2. Half press transmitter 3sec delay shoot button,
Caution: The device is out of power when the indicator
light is turning dim. Please change the batteries as soon
as possible.
5
Wireless Remote Control
Package Included
User Manual
Transmitter
Receiver
1PC
1PC
User Manual
Specification/ Features
Wireless System: FSK 2.4GHz Wireless System
Operating Voltage: 2.1~3.3V
Channel: Auto Match Frequency
Shooting Mode
Distance range:
： Single / Continuous / BULB /
Delay and 3sec Delay Shoot
120 m or above
Standby time： More than 2 years
(Transmitter AAAx2)
Measurement: Transmitter : 31.9x20x82 mm
Receiver: 38.2x29.5x74 mm
Instructions
Notes
1. This is an electronic device. It might malfunction under
a particular environment. Although, it seldom happens.
2. Please don't pull the cable while connecting with the device.
3. Please power off the transmitter/ receiver and remove
the battery when it will not be used in a long period.
4. Please don't put the device under high temperature
environment like closed car or on a dashboard.
5. Please keep the device dry and don't touch the device
when your hand is wet. Also, please don't put it into the
water or use it under the rain, it will cause misfunction
or damaged.
6. Please don't put the device in a flammable environment,
or it will cause a fire or explosion.
7. The device contains battery. Please strictly follow the
battery instruction, or it will cause damage.
Shutter Connecting Cable Type
3.5 Input plug Shutter release plug
Connecting cable has 9 types of plug which suitable for different camera and model.
Single Shooting Mode
1. Set camera mode as [ ].
2. Half press tr ans mitter shutter but ton , it will sen d
focusing signal.
3. F ull press t ransmit ter shutt er but ton , it will se nd
shooting signal and camera will shoot.
Continuous Shooting Mode
1. Set camera mode as [ ].
2. Half press transmitter shutter bu tton, tran smitter
BULB Shooting Mode
1. Set camera mode as [BULB]
2. Half press the transmitter shutter button, transmitter
will send focus signal and camera will focus.
3.
Delay Shooting Mode
1. Set camera mode as [ ]
2. Half press the transmitter shutter button, it will
send focus signal and camera will focus.
3. Full press the transmitter shutter button, transmitter
will send shooting signal, camera start to
countdown. Camera will start to shooting when
countdown finish.
When camera is on manual focus mode [MF],Camera
will not focus if half press transmitter shutter button.
When camera is on auto focus mode [AF], most of the
camera will not shoot without focus even when got the
shooting signal.
Thanks for purchasing Meyin product and read this
instruction manual.
You can contact Meyin local distributor if you have any
question or just visit Meyin official website:
http://www.meyin.com.cn
This manual information is updated at July, 25th,2013.
You need ask Meyin distributor for details if you want to
use this manual with the product which release later.
Full press and hold the transmitter shutter button
with in 3sec, the camera keep the shutter gate
open and it will close when you release the button.
Full press and hold the transmitter shutter button
over 3sec; the camera keep the shutter gate open
even you release the button. Half press the shutter
button again to stop the BULB shoot.
Transmitter Receiver
will send focusing signal and camera will focus.
3. Full press and hold the transmitter shutter button with
in 3sec; the camera keep continuous shooting and it
will stop shooting when you release the button. Full
press and hold the transmitter shutter button over
3sec; the camera keep continuous shooting even you
release the button. Half press the shutter button again
to stop the continuous shoot.
transmitter will send focusing signal and camera will
focus.
3s e c d el a y s ho o t3. F u l l p r e s s t h e t r a ns m i tt e r
bu t t on a n d t r an s mi t t er s e n d out t h e s h oo t i n g
si n g el . Th e tr an s m it t e r co u n ti n g the ti m e and
th e c a me r a w il l s t ar t s h oo t i n g a f te r 3 s e c o n d s.
