Meyer Utility Plow Guía
MEYER SUV
UTILITY PLOW
OWNER’S MANUAL
AND
USER’S GUIDE
Read the Meyer Utility Plow Owner’s Manual before operating or servicing a snow plow.
FOLLOW THESE INSTRUCTIONS EXPLICITLY.
1
Table of Contents
Subject ........................................................................................................................................................................ Page
Safety .................................................................................................................................................................................2-3
Registration Data Sheet ..................................................................................................................................................4
Introduction ........................................................................................................................................................................4
Snow Plow Assembly................................................................................................................................................5-11
Hook Up Plow.................................................................................................................................................................. 12
Disconnect Plow............................................................................................................................................................. 13
How To Plow.....................................................................................................................................................................14
Troubleshooting Guide ................................................................................................................................................15
Pre-season & Post-season Maintenance ..........................................................................................................16-17
Auto Angling Parts Lists.........................................................................................................................................18-20
Power Angling Parts List........................................................................................................................................21-25
Meyer Utility Plow Accessories............................................................................................................................26-27
Warranty ......................................................................................................................................................................28-29
Contact Meyer .................................................................................................................................................................30
EC Declaration of Conformity .................................................................................................................................... 31
Thank You
Thank you for buying the Meyer Utility Plow.
As a new owner of hard-working, mechanical
equipment, we strongly urge you to spend quality
time with this owner’s manual. It’s easy to use and
full of time-saving tips that will enhance your
ownership experience. It includes suggestions
for faster installation, safe operation and more
productive plowing.
We also strongly urge you to register your new
Meyer plow at meyerproducts.com. Registering will
only take minutes and the benets of doing so
will last for years.When registered, you will receive
timely and accurate communication on operation
tips, maintenance, new products, and service
bulletins. And in the unlikely event you need
warranty work done, your local servicing dealer
will be able to process your claim faster.
Thanks again for your business. You can now look
forward to many years of reliable performance and
keeping your driveway safer and easier to use. If you
have any questions about your Meyer plow, contact
us at: www.meyerproducts.com
Sincerely,
Customer Service
Meyer Products LLC
18513 Euclid Avenue
Cleveland, Ohio 44112
216-486-1313
SAFETY DEFINITIONS
This is the safety alert symbol. It is used
to alert you to potential personal injury
hazards.Obey all safety messages thatfollow
thissymbol toavoidpossible injuryor death.
DANGER Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING Indicates a potentially hazardous
situation which, if not avoided, could result
in death or serious injury.
CAUTION Indicatesanpotentiallyhazardous
situation which, if notavoided, may result in
minor or moderate injury.
CAUTION used without the safety alert
symbol indicates a potentially hazardous
situation which, if not avoided, will result
in property damage.
2
1Never stand or ride on the plow assembly. Keep people and pets at least 25 feet away from the snow plow when in operation. Failure to comply
will result in death
or serious injury.
2Insert and lock locking pin securely before using. Not doing so will result in serious injury or death. It can also result in damage to the vehicle and/or plow.
3Always lower moldboard to the ground when snow plow is being serviced or when vehicle is not in use.
Failure to comply
could result in death or serious
injury.
4The Meyer Utility Plow is for driveway plowing only and should be used on utility vehicles and small SUV’s. Use of this product on larger vehicles is prohibited and can result in
damage to the vehicle or plow.
Failure to comply
could result in death or serious injury.
5NEVER
use the Meyer Utility Plow without rst CAREFULLY reading the Owner’s Manual. It is CRITICAL for your safety to ALWAYS obey EVERY warning in the manual
and follow EVERY instruction EXPLICITLY. Failure to comply
could result in death or serious injury.
6The Meyer Utility Plow should be used by drivers with a valid operator’s license. Keep all body parts inside the vehicle.
Failure to comply
could result in death or serious injury.
7To prevent accidental movement of the plow, always turn o the controller whenever the plow is not in use. Failure to comply
could result in death or serious injury.
8The Meyer Utility Plow should NEVER be used for ANY other purpose other than plowing snow on a driveway, using the Meyer Utility Plow for other purposes could
result in serious injury or death.
9Inspect plow assembly and mounting components and fasteners for wear and damage before and
after each use.Worn or damaged components or fasteners could
allow the plow to drop unexpectedly.
Failure to comply
could result in death or serious injury.
10 Do not change plow position while traveling. You could suddenly lower the plow accidentally. Failure to comply
could result in death or serious injury.
11 ALWAYS wear a seat belt when plowing snow. Hidden obstructions can cause the vehicle to stop suddenly resulting in personal injury. Failure to comply
could
result in death or serious injury.
12 Do not mix dierent kinds of hydraulic uid. Some uids are not compatible and may cause performance problems and product damage Failure to comply
could
result in death or serious injury.
13 NEVER perform any repairs or maintenance with the plow controller turned on and the plow plugged into the vehicle harness and the plow attached to the vehicle.
Failure to comply
could result in death or serious injury.
14
The vehicle must not be operated when overloaded. In all cases, the loaded vehicle weight, including the
entire snow plow system, all aftermarket accessories, driver, passenger,
options, nominal uid levels, and cargo
must not exceed the front/rear Gross AxleWeight Rating (GAWR), and total GrossVehicleWeight Rating
(GVWR).These weights ratings
are specied on the safety compliance certication label on the driver’s side door opening.The use of rear ballast weight may be required to prevent exceeding the front GAWR.
Failure to comply
could result in death or serious injury.
15 Read the Meyer Utility Plow Owner’s Manual before operating or servicing a snow plow. FOLLOWTHESE INSTRUCTIONS EXPLICITLY. Failure to comply
could
result in death or serious injury.
16 SAFETY PRECAUTIONS should be used when Hydraulic Unit is in OPERATION and plow is in a
RAISED position. Lower plow to ground when vehicle is PARKED in case
of hydraulic failure.
Failure to comply
could result in death or serious injury.
SAFETY DEFINITIONS
This is the safety alert symbol. It is used
to alert you to potential personal injury
hazards.Obey all safety messages thatfollow
thissymbol toavoidpossible injuryor death.
DANGER Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING Indicates a potentially hazardous
situation which, if not avoided, could result
in death or serious injury.
CAUTION Indicatesanpotentiallyhazardous
situation which, if notavoided, may result in
minor or moderate injury.
CAUTION used without the safety alert
symbol indicates a potentially hazardous
situation which, if not avoided, will result
in property damage.
3
17 Remove Plow Assembly before placing vehicle on hoist/lift. Failure to comply
could result in death or serious injury.
18 Do not exceed 10 mph transporting plow. Do not exceed 5 mph plowing snow. Know your road conditions at all times. Keep feet clear of moldboard at all times.
Failure to comply
could result in death or serious injury.
19 SAFETY PRECAUTIONS should be used when Hydraulic Unit is SERVICED. Hydrauilic uid under pressure can cause skin injection injury. If you are injured by
hydraulic uid, get medical attention immediately. Failure to comply
could result in death or serious injury.
20 Vehicle exhaust contains lethal fumes. Breathing these fumes, even in low concentrations, can
cause death. Never operate vehicle in an enclosed area without venting the
exhaust to the outside.
Failure to comply
could result in death or serious injury.
21 Gasoline is highly amable and gasoline vapor is explosive. Never smoke while working on vehicle. Keep all open ames away from gasoline tank and lines.Wipe up
any spilled gasoline immediately. Failure to comply
could result in death or serious injury.
22 Flag obstructions that are under snow to prevent damage to product or property. Failure to comply may result in minor or moderate injury.
23 A ballast weight may be required to prevent front GAWR overloading. If required, ballast must be securely attached at least 24 inches behind the rear axle. Failure to
comply will result in property damage.
24
Batteries normally produce explosive gases which can cause personal injury.Therefore, do not allow ames, sparks or lit tobacco to come near the battery.When charging
or working near a battery, always cover your face and protect your eyes, and also provide ventilation. Batteries contain sulfuric acid which burns skin, eyes and clothing.
Failure to comply will result in property damage.
25 See your Meyer Utility Plow Authorized Distributor/Web site for specic vehicle application recommendations before installation. Failure to comply will result in
property damage.
26 Installation of a snow plow may aect your new vehicle warranty. For more information consult yourVehicle Owner’s Manual /Vehicle Dealer. Failure to comply will
result in property damage.
27 Warranty does not apply to a Meyer Utility Plow product which has been negligently or improperly assembled or installed. Failure to comply will result in property
damage.
28 CAUTION: To avoid harm to vehicles electrical system always disconnect battery before beginning installation. DO NOT BURN holes or WELD vehicle frame. This
may cause frame failure. Failure to comply will result in property damage.
29
A driver’s rst responsibility is the safe operation of the vehicle and snow plow.The most important thing you can do to prevent a crash is to avoid distractions and pay
attention to the road.Wait until it is safe to operate mobile communication equipment such as cell phones, two way radios, etc. Failure to comply will result in property
damage.
30
Front end wheel alignment and headlight aim may require readjustment after installation of equipment, and is the responsibility of the equipment installer. Failure
to adjust front wheel alignment may cause premature uneven tire wear. If required, reset to chassis manufacture’s specications. Failure to comply will result in
property damage.
Owner Name_________________________________________________________________________________
Address____________________________________________________________________________________
City____________________________________________________________________________________
State/Province _______________________________________ Zip/Postal Code___________________________
Purchased From Company Name_____________________________________________________________________
Contact Name________________________________________________________________________________
Address___________________________________________________________________________________
City________________________________________________________________________________________
State/Province______________________________________ Zip/Postal Code____________________________
Phone Number (_________) ____________________________________________________________________
E-mail______________________________________________________________________________________
DatePurchased_________________________________________________________________________________
Vehicle Make________________________________ Vehicle Model______________________________________
Vehicle Year_________________________________ Vehicle VIN_____________________________________
Controller PartNumber____________________________________________________________________________
Moldboard Serial Number________________________________________________________________________
Manufacturer of Hitch Mount_____________________________________________________________________
Registration Data Sheet
Don’t forget to register your snow plow at www.meyerproducts.com to activate your free extended warranty.
Introduction
Meyer Products has published this manual to help you get maximum
performance from your snow plow and familiarize you with the
features designed for eciency and safety; be sure you recognize and
understand them. Follow recommended operation and maintenance
instructions, so when the storm hits, your utility plow will be ready
and you will know how to plow like a pro. WARNING: Deployment
of an air bag while using the Meyer Utility Plow will not be
covered under Meyer Products’ warranty.
In conjunction with FMVSS (Federal Motor Vehicle Safety Standards) and
OEM (Original Equipment Manufacturer) guidelines, Meyer Products has
designed this plow pack.
We also strongly urge you to register your new Meyer Utility Plow at
meyerproducts.com. Registering will only take minutes and the
benets of doing so will last for years.When registered, you will
receive timely and accurate communication on operation tips,
maintenance, new products, and service bulletins. And in the
unlikely event you need warranty work done, your local servicing
dealer will be able to process your claim faster.
Vehicle requirements:Two or Four wheel drive UtilityVehicles. Use
on vehicles greater than utility vehicles or small SUV’s is prohibited.
Minimum 60 Amp alternator. Minimum 70 Amp Battery (550CCA/
Cold Cranking Amps). Must be able to accept a front 2”category 3
receiver hitch. Front suspension must be able to handle 250 lbs. of
added weight of plow and hitch. Stock vehicle with no suspension
modications (lift kits) that have modied the height of the vehicle.
Hitch Requirements: Category 3 2”x2”front receiver.
300lb. Tongue weight rating – 3000lb. pull rating
THE MEYER UTILITY PLOW HYDRAULIC SYSTEM HAS BEEN
SHIPPED DRY. FILL ONLY WITH MEYER M-1 HYDRAULIC FLUID.
SEE PAGE 6 FOR DETAILS.
Under the continuing Meyer Products Improvement Plan, Meyer Products reserves the right
to change design details and construction without prior notice and without incurring
any obligation.
423, 25, 26, 27 4, 6, 14
SAFETY PRECAUTIONS -
See pages 2-3 for denitions
Plow Carton Hydraulic Lift Frame Carton
Snow Plow Assembly
Your new Meyer Utility Plow System consist of two cartons, Plow Carton and Hydraulic Lift Frame Carton.
1
2
6
4
3
5
Carton contains:
1. Plow Assembly
2. Hydraulic Assembly
3. Auto or Power Angling Ram
4. Hydraulic Cover
5. Plow Parts Bag (08275 pg. 18 or 08276 pg. 21)
6. Mounting Hardware Bag (08279 pg. 18 or 08280 pg. 21)
7. Hydraulic Fluid (2 quarts)
8. Dielectric Grease
Items not shown above:
Controller
Vehicle Harness
Vehicle Harness Extension
Zip Ties
Plow Marker
Hitch Mount (sold separately)
Recommended assembly tools:
1/2”drive ratchet with 15/16”deep well socket
15/16”combination wrench
side cutters
1/2”combination wrench
8 or 10mm combination wrench
dependant on vehicle manufacturer
12mm combination wrench
5
78
27, 28 12
SAFETY PRECAUTIONS -
See pages 2-3 for denitions
STEP 1a
Connect Plow Assembly to Hydraulic Assembly (g. 1) using
5/8-11 x 5”Bolt (g. 2) and 5/8-11 Locknut (g. 3) from the
Mounting Hardware Bag.
STEP 1b
Attach the two wheel assemblies with the shorter brackets to
either side of the plow pivot bar (g. 4 & 5) and the third wheel
assembly to the Hydraulic Assembly A-frame under the lifting
cylinder using three Hair Pin Cotter (g. 6) from the Mounting
Hardware Bag.
STEP 1c
Attach the Auto or Power Angling Ram to the A-Frame using two
1/2 x 3”Pivot Pins (g. 7), six 1/2”Flatwashers and two
1/8”x 1-5/16”Hair Pins (g. 8). Be sure four 1/2”washers are
positioned as shown in gure 8 and remaining two 1/2”washers
are placed over the 1/2”x 3”Pivot Pins before the two 1/8”1-5/16”
Hair Pins are installed. Figure 9 shows the proper set-up with the
Power Angling Ram.
STEP 1d
Remove Reservoir Cap from Hydraulic unit (g. 10) and ll with
Meyer M-1 Fluid (g. 11) Provided up to the full mark located on
the reservoir. Re-install Reservoir Cap.
STEP 1:
PLOW & HYDRAULIC LIFT FRAME ASSEMBLY
(Fig. 1) (Fig. 2) (Fig. 3)
(Fig. 4) (Fig. 5) (Fig. 6)
(Fig. 7) (Fig. 8)
(Fig. 9)
(Fig. 10) (Fig. 11)
69, 12
SAFETY PRECAUTIONS -
See pages 2-3 for denitions
Meyer Utility Plow System should now look like the picture below.
7
STEP 1e
Install Plow Markers to each side of plow using
5/16-18 x 1” bolt, 5/16 atwashers and 5/16-18
locknut as shown below.
Me
y
er Uti
l
it
y
P
l
ow S
y
stem s
h
ou
ld
now
l
oo
k
l
i
k
e t
h
e picture
b
e
l
ow
.
7
8
*Plow shown with Power Angling
STEP 2a
Carefully route theVehicle Harness to the vehicle battery. Be sure to stay
away from hot, sharp or moving parts of the vehicle and use the zip ties
provided to secure. Attach the Black wire to the negative (-) battery post
(g. 12) and the red wire to the positive (+) battery post (g. 13).
STEP 2b
Carefully attach the Vehicle Harness Extension to the vehicle harness.
Be sure to stay away from hot, sharp or moving parts of the vehicle and
use the zip ties provided to secure. Connect the Controller to the Harness
Extension (g. 14).
STEP 2c
Install your Receiver Hitch Mount (sold separately, see hitch
requirements on pg. 4) per manufacturers instructions. Measure
center of square hitch to the ground.This dimension (A) should be a
minimum of 10”and a maximum of 13”(g. 15). Measure from the
hitch pin hole to the very end of your bumper. This dimension (B)
should be not more than 8-1/2”(g. 15). If your dimension does
not fall within these ranges you should contact your hitch dealer/
manufacturer for height or length adjustment accessories.
STEP 2:
WIRING INSTALLATION
(A) 10” min-13” max
(B)
8-1/2” max
(Fig. 15)
8
(Fig. 12)
(Fig. 13)
(Fig. 14)
24, 25, 26, 27, 28 9, 20, 21
SAFETY PRECAUTIONS -
See pages 2-3 for denitions
Tabla de contenidos
Otros manuales de Accesorios para automóviles de Meyer
Meyer
Meyer Lot Pro 41760 Manual de usuario
Meyer
Meyer EZ-Mount Classic Manual de usuario
Meyer
Meyer Lot Pro Manual de instrucciones
Meyer
Meyer MDII Manual de usuario
Meyer
Meyer EZ-SWEEP Manual de instrucciones de instalación
Meyer
Meyer Lot Pro Light Duty Manual de usuario
Meyer
Meyer ST-78 Manual de usuario
