Metrologic MS951 Instrucciones de funcionamiento
METROLOGIC INSTRUMENTS, INC.
MS951 Hand-Held Laser Scanner
Including All Scanner Configurations
Programming Guide
ii
Locations
CORPORATE HEADQUARTERS
North America Metrologic Instruments, Inc. Customer Service: 1-800-ID-METRO
90 Coles Road Tel: 856-228-8100
Blackwood, NJ 08012-4683 Fax: 856-228-6673
Email: [email protected]
Internet: www.metrologic.com
EUROPEAN HEADQUARTERS
Germany, Metrologic Instruments GmbH Tel: +49 89 89019 0
Middle East and Africa Dornierstrasse 2 Fax: +49 89 89019 200
82178 Puchheim b. Email: info@europe.metrologic.com
Spain Metrologic Eria lbérica SL Tel: +34 913 272 400
Julián Camarillo 29, D-1 Fax: +34 913 273 829
28037 Madrid
Italy Metrologic Instruments Italia srl Tel: +39 0 51 6511978
Via Emilia 70 Fax: +39 0 51 6521337
France Metrologic Eria France SA Tel: +33 (0) 1 48.63.78.78
69 Rue de la Belle Etoile Fax: +33 (0) 1 48.63.24.94
95947 – ROISSY CDG CEDEX
United Kingdom Metrologic Instruments UK Limited Tel: +44 (0) 1256 365900
58 Tempus Business Centre Fax: +44 (0) 1256 365955
Hampshire RG21 6XG
ASIA
Singapore Metrologic Asia (Pte) Ltd Tel: 65-6842-7155
No. 8 Kaki Bukit Place Fax: 65-6842-7166
4th Floor Email: [email protected]ic.com
Singapore 416186
China Metro (Suzhou) Technologies Co., Ltd. Tel: 86-512-62572511
221 Xing Hai Street Fax: 86-512-62571517
Suzhou, China
215021
Japan Metrologic Japan Co., Ltd. Tel: 81-03-3839-8511
Matsunoya Building, 6 Floor Fax: 81-03-3839-8519
Taitou-Ku, Tokyo 110-0015 Japan
SOUTH AMERICA
Brazil Metrologic do Brasil Ltda. Tel: 55-11-5182-8226
Rua da Paz 2059 Fax: 55-11-5182-8315
CEP 04713-002 Email: info@br.metrologic.com
Chácara Santo Antônio
São Paulo, SP, Brasil
Outside Brazil Metrologic South America Tel: 55-11-5182-7273
Rua da Paz 2059 Fax: 55-11-5182-7198
CEP 04713-002 Email: info@sa.metrologic.com
Chácara Santo Antônio
São Paulo, SP, Brasil
Copyright
© 2002 by Metrologic Instruments, Inc. All rights reserved. No part of this work may be reproduced, transmitted, or stored in
any form or by any means without prior written consent, except by reviewer, who may quote brief passages in a review, or
provided for in the Copyright Act of 1976.
Products and brand names mentioned in this document are trademarks of their respective companies.
iii
Table of Contents
Scope of the MS951 Programming Guide..................................................... 1
Programming the Scanner ............................................................................. 2
Enter Program Mode..................................................................................... 3
Recall Defaults.............................................................................................. 3
Laser Activation Range................................................................................. 4
Laser Operation............................................................................................. 4
Same Symbol Re-Scan.................................................................................. 5
Identical Symbol Re-Scan Indicator ............................................................. 5
1 vs. 2 Scan Buffers ...................................................................................... 5
Decode Options............................................................................................. 6
Beeper Tones ................................................................................................ 7
Audible Indicators for Communication Timeouts......................................... 8
RS-232 Interface ........................................................................................... 9
RS-232 Parameter - Baud Rate ..................................................................... 9
RS-232 Parameter - Parity .......................................................................... 10
RS-232 Parameter - Data Bits..................................................................... 10
RS-232 Parameter - Hardware Handshaking .............................................. 11
RS-232 Parameter - Software Handshaking................................................ 11
Intercharacter Delay.................................................................................... 12
RS-232 Parameter - Scanning Control (DTR Signal) ................................. 13
“DE” Disable Command............................................................................. 13
iv
Longitudinal Record Redundancy Check (LRC) ........................................ 14
Record Header/Terminator Select......................................................... 14, 15
UPC/EAN Identifiers .................................................................................. 16
Keyboard Wedge (KB) Interface ................................................................ 17
KB Parameter - Keyboard Type.................................................................. 17
KB Parameter - Keyboard Country Type.................................................... 18
KB Parameter - Caps Lock Mode ............................................................... 20
KB Parameter - Alt Mode ........................................................................... 20
KB Parameter - Inter Scan Code Delay (AT and PS/2 Modes)................... 21
KB Parameter - XT - Clean-Up Bit............................................................. 21
Record/Header Terminator Select......................................................... 22, 23
Intercharacter Delay.................................................................................... 23
KB Parameter - Special Features ................................................................ 24
OCIA Options ............................................................................................. 25
IBM 46XX Options..................................................................................... 26
IBM 46XX Parameter - Inter Record Delay ............................................... 26
Light Pen Options ....................................................................................... 27
Light Pen Emulation ................................................................................... 28
Code Type Selections ............................................................................28-30
Minimum Code Length for All Code Types ............................................... 31
Code Length Minimum Feature .................................................................. 31
UPC/EAN Code.......................................................................................... 32
v
UPC-A Options........................................................................................... 32
UPC-E Options ..................................................................................... 33, 34
UCC Supplemental Options........................................................................ 34
Supplemental ISBN Options....................................................................... 35
Coupon Code 128 ................................................................................. 35, 36
Code 39................................................................................................. 36, 37
Codabar....................................................................................................... 37
Interleaved 2 of 5 (ITF)............................................................................... 38
Interleaved 2 of 5 (ITF) Symbol Lengths............................................... 39-41
ITF Minimum Symbol Length Test ............................................................ 42
MSI Plessey Check Digit ...................................................................... 42, 43
UK Plessey Options .................................................................................... 43
ScanPal Data Collector ............................................................................... 44
Test Modes.................................................................................................. 44
Special Features .....................................................................................45-47
User Programmable Prefix and Suffix ID Characters ................................. 48
RB0 - RB9 Bar Codes................................................................................. 49
ASCII Reference Table.......................................................................... 50-54
PC Extended Reference Key Tables ..................................................... 55, 56
Reserved Codes...................................................................................... 57-68
Disclaimer................................................................................................... 69
Index ......................................................................................................70-72
1
Scope of the MS951 Programming Guide
This Manual contains all of the configuration codes for all versions of the
MS951 hand-held bar code scanner products.
Not all hardware versions of the scanner support all of the features
universally. PC Keyboard Wedge units do not use baud rates. Light Pen
emulation scanners should not try to drop UPC/EAN check digits. Some
features will deliver different results based upon the primary interface
selected.
Emphasis will be placed on PC Keyboard Wedge and RS-232 applications.
Keyboard Wedge units default to Keyboard Wedge communications. All
other units default to RS-232 parameters.
2
Programming the Scanner
The scanner is shipped from the factory programmed to a set of default
conditions noted in this guide by an asterisk that appears before the brief
definition. Since each host system is unique, the scanner has to be
configured to match your host system requirements.
1. Connect the scanner to the host system or power source.
(Refer to the Installation and User’s Guide MLPN 2365.)
2. Scan the ENTER/EXIT PROGRAM MODE bar code.
(The unit will beep three times.)
Enter/Exit
Program Mode
3. Scan by positioning the output window within two inches of each
code. (When the first menu selection has been scanned, the laser will
stay on until the ENTER/EXIT PROGRAM MODE code is scanned
again. If no scanning occurs for 30 seconds while the scanner is in
program mode, the unit will beep three times and all changes made
will be lost. If this occurs, return to Step 1.)
4. Upon completing the scanning of the appropriate configuration
options, scan the ENTER/EXIT PROGRAM MODE bar code again.
(The new options will be saved and the scanner is ready for normal
operation.)
Note: While in program mode, the scanner will make a Α razz sound
when:
¾the bar code it is scanning is not a program mode code type;
¾the feature is not currently supported in the firmware;
¾the feature is not supported on the scanner’s hardware
configuration.
The sound serves as an audible indication that the scanner will not
support that feature.
**
Recall Defaults
3
DF1
Enter Program Mode
**Ability to Enter Program When this option is selected, pro-
Mode After Any Scan gramming can be entered by scann-
gin the ENTER/EXIT PROGRAM
MODE bar code after power up or
during normal scanning operation.
Enter Program Mode When this option is selected, the
Only on First Scan scanner will only enter program
mode after power-up. Scan the
ENTER/ EXIT PROGRAM MODE
bar code immediately after the scan-
ner first receives power. This option
prevents the scanner from accident-
ally entering program mode during
normal scanning operation.
Recall Defaults
If during programming of the scanner,
there is a need to return to the original Recall Defaults
factory settings, scan the RECALL
DEFAULTS bar code. Any settings
selected during that session or a
previous session will be lost.
R18
R19
DF1
Enter/Exit Program Mode
4
**
Laser Activation Range
Short Range Activation When this option is selected, the IR sensor
Out of the Stand is guaranteed to be activated when the posi-
tion of the scanning window three inches
from the object.
Short Range Activation When this option is selected, the IR sensor
In the Stand is guaranteed to be activated when an object
is presented three inches from the scanning
window.
**Long Range Activation When this option is selected, the IR sensor
Out of the Stand is guaranteed to be activated when the
position of the scanning window is eight
inches from the object.
**Long Range Activation When this option is selected, the IR sensor
In the Stand is guaranteed to be activated when an object
is presented eight inches from the scanning
window.
Laser Operation
** Normal Scan This option is the default setting. When the laser is
activated by the IR sensor, the laser beam emits from
the output window and displays a constant, horizontal
line until a bar code is sensed or until the scanner
timeout elapses.
Pulsing Scan When the laser is activated by the IR sensor, the laser
beam emits from the output window and displays a
horizontal line that pulses until a bar code is sensed or
until the scanner timeout elapses.
Custom Scan This option is available for special applications.
Do not scan the CUSTOM SCAN bar code unless
instructed by a Metrologic representative.
RS1
RS3
RS2
RS4
RS5
RS6
LP8
Otros manuales para MS951
2
Tabla de contenidos
Otros manuales de Escáner de Metrologic
Metrologic
Metrologic MS951 Instrucciones de funcionamiento
Metrologic
Metrologic MK9535-39B538 Manual de usuario
Metrologic
Metrologic IS4813 Guía de configuración rápida
Metrologic
Metrologic MS9500 Voyager Series Manual de usuario
Metrologic
Metrologic MS9540-38-3 - Metrologic MS9540 VoyagerCG Manual de usuario
Metrologic
Metrologic MS9535 Voyager Guía de inicio rápido
Metrologic
Metrologic Eclipse MS5145-00 Manual de usuario
Metrologic
Metrologic IS4225 ScanGlove Manual de usuario
Metrologic
Metrologic ARGUSSCAN MS7220 Manual de usuario
Metrologic
Metrologic Laser Scanner Manual de usuario
Metrologic
Metrologic MK2320KD-60B241 - Metrologic MS 2320 Stratos... Manual de usuario
Metrologic
Metrologic MS951 Manual de usuario
Metrologic
Metrologic FocusBT MS9535 Manual de usuario
Metrologic
Metrologic MK9535-39B538 Manual de usuario
Metrologic
Metrologic IS8000 Manual de usuario
Metrologic
Metrologic iQ160 Guía del usuario
Metrologic
Metrologic IS4220 ScanGlove Instrucciones de instalación y funcionamiento
Metrologic
Metrologic MS9524 VoyagerPDF Series Manual de usuario
Metrologic
Metrologic MS9544 VoyagerPDF Series Manual de usuario
Metrologic
Metrologic MS9590i VoyagerGS Series Manual de usuario
