METREL DELTAPAT Series Instrucciones de instalación
www.portableappliancetesters.com.au/support
1
www.portableappliancetesters.com.au/support
Also Included with the kit:
AC Power Supply for the Zebra Printer
Thermal Ribbon installed in Printer
Roll of 500 Tags
Heavy Duty Case
Zebra Bluetooth Adapter
Bluetooth Initialisation Cable
2
www.portableappliancetesters.com.au/support
Firstly you will need to download the Patlink software from the Google Play Store. This can be accessed
on your Android Device through the Google Play Store. The software is free to download, but requires
an activation code to register the full version. This activation code is supplied when you purchase the
Metrel Deltapat Complete Kit, additional licences can be purchase individually.
You will need to search for and install Patlink on your device from the Google Play store, it will display
an icon that looks like this. You can download the app from here:
https://play.google.com/store/apps/details?id=si.metrel.patlink
Once the app has downloaded to your device, open it and you will get the main home screen
This the main screen to connect to with devices, from this screen you will need to go into Settings to:
Activate the software
Select your Printer
This screen also allows you to connect to your Metrel Delta appliance
tester, scan previously printed tags, and change settings.
The current connection status of the Tester is located in the top left
corner. This will default to Disconnected unless you have manually
connected.
It is worth checking the Google Play Store for updates to the app as
they are released periodically to fix bugs and improve the application
3
www.portableappliancetesters.com.au/support
You will need to activate the software with the supplied code, this is usually located inside the quick start guide or
under the foam in the lid of the case. This activation provides the full functionality of the software.
From the main home screen, go to Settings
Then Device Activation
Select the Key with a Plus in the bottom left corner to add a new tester
Make sure the DeltaGT is turned on, it should appear in blue, the last series of numbers will be the same as the serial
number located on the back of your tester.
4
www.portableappliancetesters.com.au/support
Choose the MI 3309BT and it will prompt you to enter the activation
code supplied. Enter it and then press OK
The Device should appear as an Activated Device and the process is complete.
The printer only needs to be setup once within the software, you don’t need to connect to the printer each time, the
connection is between the Android device and the Metrel Tester, THe printer only comes into play when you press
the print button after a test has been performed and saved.
To setup the printer, go to Settings
Then Select BT Printer
A list of available Bluetooth devices will appear, ZebraPRN should appear in green.
5
www.portableappliancetesters.com.au/support
Select it and then you should see the ZebraPRN as your default
printer. This will now be the default printer when you press the
print button after a completed test.
The Metrel Tester also needs to be setup to the correct printer, this should be set when purchased but if the unit is
wiped or deleted, you may need to set this up again.
On the Delta, use the UP / DOWN keys until the menu shows SETUP.
Press Test and then scroll down to Communication and press the Test button again
Scroll through the Printer options until Zebra BT is selected
Scroll down to PRN Name and press Test, the unit should scan and find ZebraPRN
6
www.portableappliancetesters.com.au/support
Select ZebraPRN and then it should return you to the communiations screen with PRN NAME: ZebraPRN chosen
You can now escape back to the main screen
7
www.portableappliancetesters.com.au/support
To start performing tests, from the main home screen you go to scan for devices and select your Metrel Tester, it will
then take you to the main data screen.
From here you enter the 4 Key pieces of
information.
Appliance ID - The unique Identification number
for the appliance
Appliance name - The description of the appliance
being tested
Retest Period (in months) - When the appliance is
next due for retesting.
Location - Where the appliance is stored, this is
how it will be grouped and reported when
downloaded to the computer.
We do not use the SHORTCODE function in
Australia
The 6 buttons on the bottom left are the same 6 buttons located on the front of your Metrel Appliance Tester and
allow you to navigate and control the machine.
The First step is to enter the four pieces of information on the appliance you are about to test.
Once that is entered, you press the Up, Down and OK/Test Buttons to navigate to the Simple Test menu on the
Delta, and then select the correct test for the appliance you are checking. Press Test to start the test process.
Once the test is completed and you are on the Overall Results screen of your Delta tester, you can press Save and
the Delta will beep, then press Print and a tag should come out.
You can then change whatever details you need to for the next test, then repeat the process.
8
www.portableappliancetesters.com.au/support
Plug the transformer into the battery and the wall adaptor into the wall power outlet; ensure that the battery
is turned on while charging. There should be an LED illuminated on both the transformer and
wall adaptor.
The transformer will glow orange during charging and then green when fully charged. This can take upto 6 hours to
fully charge from flat.
To run the printer off mains power, you will need to lift
the printer out of the foam casing, disconnect the lead
from the printer to battery and replace it with the mains
power lead as seen above.
Then connect the 240v power plug to mains power and
the printer should turn on with a green light.
9
www.portableappliancetesters.com.au/support
To have the Tester details appear on the tag, you need to specify a user on the Delta Pat.
From the Main menu select Setup and then scroll to User Data. You will be provided with Users 1 - 5, press the Tab
(the left and right arrow buttons) and you can enter the user details you wish to appear on the tag.
There is a maximum of 12 usable characters, you press the up and down buttons to scroll through the letters and
numbers and the press Test to select the character you wish.
Once the correct details are entered, press the Mem button to save the details, then press Test to select that user.
That user will then appear on all future tags, to change the user just go into Setup then User Data and either create
another user, or select a previous one and press Test.
This is a quick guide on retrieving results with the PATLink Pro software from a MI
3309 Delta tester, and creating a report.
Open Metrel PATLink Pro on your computer.
Press on the Instrument menu, then press “Get Results”
You will be prompted to enter the serial information to connect to the device.
You will need to determine what COM port your computer has assigned to the
cable, otherwise you can tick Auto-detect (COM port, Baud rate) and it will
scan through each of the COM ports and baud rates.
Este manual sirve para los siguientes modelos
1
Otros manuales de Equipo de prueba de METREL
METREL
METREL MD 9240 Manual de usuario
METREL
METREL MD 1050 Manual de usuario
METREL
METREL OmegaPAT XA MI 3360 Manual de usuario
METREL
METREL BetaPAT MI 2141 Manual de usuario
METREL
METREL MI 3394 CE MultiTesterXA Manual de usuario
METREL
METREL A 1322 Manual de usuario
METREL
METREL Eurotest 61557 Manual de usuario
METREL
METREL MI 3100 SE EurotestEASI Manual de usuario
METREL
METREL Eurotest 61557 Manual de usuario
METREL
METREL MI 2088 Manual de usuario
METREL
METREL EurotestXC Manual de usuario
METREL
METREL EurotestXD MI 3155 Manual de usuario
METREL
METREL MI 3200 Manual de usuario
METREL
METREL SigmaGT MI 3310 Manual de usuario
METREL
METREL EasiPLUS MI 3000 Manual de usuario
METREL
METREL MultiServicerXD MI 3325 Manual de usuario
METREL
METREL GigaOhm 5kV Manual de usuario
METREL
METREL Euro Z 800 V Manual de usuario
METREL
METREL Eutrotest PB Manual de usuario
METREL
METREL MI 2094 Manual de usuario
Manuales populares de Equipo de prueba de otras marcas
SMART
SMART KANAAD SBT XTREME 3G Series Manual de usuario
Agilent Technologies
Agilent Technologies BERT Serial Manual de usuario
Agilent Technologies
Agilent Technologies N3280A Manual de usuario
Vernier
Vernier Go Direct Voltage Manual de usuario
Lifeloc
Lifeloc R.A.D.A.R. Manual de usuario
Fluke
Fluke T5-600 Instrucciones de funcionamiento e instalación
