Metra Electronics 99-7509 Manual de usuario

METRA. THE WORLD’S BEST KITS.™

APPLICATIONS

1-800-221-0932 metraonline.com

INSTALLATION INSTRUCTIONS FOR PART 99-7509

Small Flat Blade Screwdriver • Panel Removal Tool • Phillips Screwdriver

TOOLS REQUIRED

Mazda 5 2006-up

(with manual climate controls)

99-7509

• A) Radio Housing • B) ISO Brackets • C) ISO Trim Plate • D) Double DIN Brackets

• C) Double DIN Trim Plate • D) Snap In Pocket

KIT FEATURES

KIT COMPONENTS

• Painted to match factory dash

• DIN radio provision with pocket

• ISO radio provision with pocket

• Double DIN radio provision

• Stacked ISO mount units provision

WIRING & ANTENNA CONNECTIONS (Sold Separately)

Wiring Harness: •70-7903 - Mazda Harness 01-up

Table of Contents

Dash Disassembly

– 2006-up Mazda 5 3-5

Kit Assembly

– DIN radio provision with pocket 6

– ISO mount radio provision with pocket 7-8

– Double DIN/stacked ISO DIN head unit provision 9

KNOWLEDGE IS POWER

Enhance your installation and fabrication skills by

enrolling in the most recognized and respected

mobile electronics school in our industry.

Log onto www.installerinstitute.com or call

800-354-6782 for more information and take steps

toward a better tomorrow.

Metra recommends MECP

certified technicians

99-7509

Caution

Metra recommends disconnecting the negative battery terminal before beginning any

installation. All accessories, switches, and especially air bag indicator lights must be

plugged in before reconnecting the battery or cycling the ignition.

*NOTE: Refer also to the instructions included with the aftermarket radio.

1. Remove the shifter. (Figure A)

2. Remove (2) Phillips screws exposed

below shift lever trim panel. (Figure B)

Continued on next page

Dash Disassembly

99-7509

M-D

A/C

(Figure A)

(Figure B)

99-7509

Dash Disassembly

3. Unclip and remove the center console

side trim panels then remove (1) Phillips

screw per side behind panels.

(Figure C,D).

Continue to next page

(Figure C)

(Figure D)

99-7509

Dash Disassembly

4. Unclip and pull the center console

towards the rear of the vehicle.

Note: You do not have to remove the

center console completely. (Figure E)

5. Remove (2) Phillips screws at the

bottom of the radio trim panel then

unclip the panel including the factory

radio. Unplug and remove the panel.

Note: The climate controls do not

come out with the panel.

(Figure F,G)

Continue to kit assembly

A/C

(Figure E)

(Figure F)

(Figure G)

Kit Assembly 99-7509

DIN radio provision with pocket

(Figure A)

(Figure B)

(Figure C)

1. Locate the factory wiring harness in the

dash. Metra recommends using the

proper mating adapter from Metra or

AXXESS. Re-connect the negative

battery terminal and test the unit for

proper operation.

2. Slide the DIN cage into the radio

housing and secure by bending the

metal locking tabs outward. (Figure A)

3. Slide the aftermarket radio into the cage

until it snaps into place. (Figure B)

4. Snap the pocket into the radio housing.

(Figure C)

5. Reassemble dash in reverse order

of disassembly.

Kit Assembly 99-7509

ISO mount radio provision with pocket

(Figure A)

(Figure B)

(Figure C)

1. Locate the factory wiring harness in the

dash. Metra recommends using the

proper mating adapter from Metra or

AXXESS. Re-connect the negative

battery terminal and test the unit for

proper operation.

2. Mount the ISO brackets to the

aftermarket radio using the screws

supplied with the radio. (Figure A)

3. Slide the radio into the radio housing

until it snaps into place. (Figure B)

4. Snap the trim plate onto the front of the

radio housing. (Figure C)

5. Snap the pocket into the Radio.

Countinue to next page

Kit Assembly 99-7509

ISO mount radio provision with pocket

(Figure D)

6. Snap the pocket into the radio housing.

(Figure D)

7. Reassemble dash in reverse order

of disassembly.

Kit Assembly 99-7509

Double DIN/Stacked ISO units provision

(Figure A)

(Figure B)

(Figure C)

1. Locate the factory wiring harness in the

dash. Metra recommends using the

proper mating adapter from Metra or

AXXESS. Re-connect the negative

battery terminal and test the unit for

proper operation.

2. Cut and remove the center bar from the

radio housing. (Figure A)

3. Snap the double DIN brackets to the

inside edge of the radio housing.

(Figure B)

4. Slide the double DIN or stacked ISO

unit(s) into the bracket/radio housing

assembly and secure the double DIN

or stacked ISO unit(s) to the assembly

using the screws supplied with the

unit(s). (Figure C)

5. Snap the double DIN trim plate onto the

front of the Radio Housing.

(Figure C)

6. Reassemble dash in reverse order

of disassembly.

Notes

Otros manuales para 99-7509

Tabla de contenidos

Otros manuales de Accesorios para automóviles de Metra Electronics

Metra Electronics

Metra Electronics 99-7819 Manual de usuario

Metra Electronics

Metra Electronics 99-8222 Manual de usuario

Metra Electronics

Metra Electronics 95-6523 Manual de usuario

Metra Electronics

Metra Electronics 108-MI1 Manual de usuario

Metra Electronics

Metra Electronics 71-1729 Manual de instrucciones

Metra Electronics

Metra Electronics 95-5820 Manual de usuario

Metra Electronics

Metra Electronics KIA OPTIMA 99-7324 Manual de usuario

Metra Electronics

Metra Electronics GMOS-06 Manual de usuario

Metra Electronics

Metra Electronics 99-8205 Manual de usuario

Metra Electronics

Metra Electronics LEXUS 99-8150 Manual de usuario

Metra Electronics

Metra Electronics 99-7803G Manual de usuario

Metra Electronics

Metra Electronics 95-7339S Manual de usuario

Metra Electronics

Metra Electronics METRA 99-7603 Manual de usuario

Metra Electronics

Metra Electronics 95-7867 Manual de usuario

Metra Electronics

Metra Electronics 99-9305 Manual de usuario

Metra Electronics

Metra Electronics 99-7892 Manual de usuario

Metra Electronics

Metra Electronics 99-6525 Manual de usuario

Metra Electronics

Metra Electronics 99-7864 Manual de usuario

Metra Electronics

Metra Electronics 99-7860 Manual de usuario

Metra Electronics

Metra Electronics 2004-2009 99-3303 Guía del usuario

Metra Electronics

Metra Electronics 95-3302 Manual de usuario

Metra Electronics

Metra Electronics 99-4000 Manual de usuario

Metra Electronics

Metra Electronics 99-7314 Manual de usuario

Metra Electronics

Metra Electronics 95-7393B Manual de usuario

Manuales populares de Accesorios para automóviles de otras marcas

James Baroud

James Baroud Odyssey Manual de usuario

Motorola

Motorola i50sx Manual de usuario

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manual de usuario

Feniex

Feniex T3 Manual de usuario

Renault

Renault 77 11 423 180 Manual de usuario

Kia

Kia E8300-4D000 Manual de usuario

Brink

Brink 756843 Manual de usuario

Whispbar

Whispbar K085W Manual de usuario

v.link

v.link CI-VL2-PC-HSD Manual de usuario

Viking

Viking Stack-Rack Guía de configuración rápida

Aries

Aries 203015 Manual de usuario

Choetech

Choetech AT0005 Manual de usuario

ZZ2

ZZ2 ZZAIR-PRO Manual de usuario

Holman

Holman 4A80L Manual de usuario

Thule

Thule 2075 Manual de usuario

Motorola

Motorola T325 Manual de usuario

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guía de instalación

DV8

DV8 FBJL-02 Manual de usuario