Version 2.1 en MBI 46.31 operating instruction.docx
Issue date: 01/2022 Page 2 of 42
Contents
1 General.................................................................................................3
1.1 Warranty and liability ........................................................................3
1.2 Technical support and contact details...............................................3
2 Safety Instructions ..............................................................................4
2.1 Intended use.....................................................................................4
2.2 Conditions at the installation site ......................................................4
2.3 General hazards if the safety instructions are not followed...............4
2.4 Qualified personnel...........................................................................4
2.5 Check for transport damage.............................................................5
3 Warning and Other Messages ............................................................5
3.1 Use of warning messages ................................................................5
3.2 Other messages...............................................................................5
4 Product Description ............................................................................6
4.1 Glossary...........................................................................................6
4.2 Function and design .........................................................................9
4.3 Suitable displacement sensors.......................................................11
4.4 Overview of types and options........................................................14
5 Placing into Service...........................................................................18
5.1 Pin assignment...............................................................................18
5.2 Setting options of the measuring amplifier......................................20
5.3 Adjustment using trimming potentiometer.......................................23
5.4 Basic configuration of measuring amplifier .....................................26
5.5 Optimizing the linearity characteristic of the measuring chain.........32
5.6 Improving the noise rejection..........................................................35
6 Operation ...........................................................................................36
7 Repairs...............................................................................................36
8 Maintenance.......................................................................................37
8.1 Preventative maintenance..............................................................37
8.2 Cleaning.........................................................................................37
9 Disposal .............................................................................................37
10 EU Declaration of Conformity ........................................................38
Electronics with a supply voltage < 50 V ................................................38
Electronics with a supply voltage > 50 V ................................................39
11 Technical Specifications ................................................................40
