Messoa SCR515PRO Manual de usuario

Intelligent Trafc Camera

Instruction Manual

Before attempting to connect or operate this product, please read these

instructions carefully and save this manual for future use.

CONTENTS

1. SAFETY INFORMATION...

.............................................

2. PART DESCRIPTION & DIMENSION.................................

3. INSTALLATION..............................................................

4. INTERNAL PART NAMES.................................................

5. OSD SETUP MENU.........................................................

6. MENU SETTING.............................................................

7. SPECIFICATION.............................................................

P32-515010-000A A.3 515

1. Read this Instruction Manual:

Before using the product, please carefully read through the

safety information and operation instructions.

2. Keep this Instruction Manual:

Safely store the Instruction Manual for future reference.

3. Follow instructions:

When operating the unit, please follow instructions on the

Instruction Manual.

4. Cleaning:

Before cleaning the unit, please rst unplug the power.

5. Peripheral/accessories:

Do not place the unit on an unstable cart, tripod, or on a

tabletop as personal injury and damage to the unit may occur

due to a fall. Please use ofcially certied support, frames, and

accessories included with the product. Follow the instructions in

this Instruction Manual during installation to ensure the quality

and maintain safety.

6. Power:

Please follow the labeled specications on the unit and

supply with the correct power. If unsure of the actual power

requirements, please contact the distributor and do not connect

the power at will.

7. Power cable:

The power cable must be properly secured as improper

connections may cause a short circuit, re hazards, or serious

damage and hazards.

8. Lightning strike:

During prolonged inactivity, please unplug the power cable and

the video cable to avoid damage from lightning strike and power

surges.

9. Foreign objects and uids:

Please do not insert any objects into the unit or spill liquids to

avoid short circuits.

10. Warning:

High voltage circuitry contained within the unit. Do not

disassemble to avoid electric shock. All maintenance operations

must be handled by qualied maintenance staff.

SAFETY INFORMATION

Safety Information:

11. Maintenance:

When the following occurs, please rst power off the unit and

then perform maintenance by qualied maintenance staff:

(a). Damaged power cable or socket

(b). Liquid spills or foreign objects in the unit

(c). Inoperable unit when proper instructions are followed

(d). Dropped unit or damaged shell

(e). Other anomalies

12. Component replacement:

Replaced components by the maintenance staff must be ofcial

certied parts of identical specications. Using unauthorized

components can cause re hazards and electric shock damage.

13. Safety inspection:

After the unit maintenance has been completed, the maintenance

staff must perform safety inspection to ensure proper operation.

SAFETY INFORMATION

The triangle symbol with lightning arrow indicates

that ungrounded “Hazardous Voltage” exists within

the unit. The voltage level may cause personal

electric shock hazards.

The triangle symbol with exclamation mark

indicates that there are important operation and

maintenance instructions in the Instruction Manual.

IMPORTANT SAFETY INSTRUCTIONS

The equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to Part 15 of the FCC Rules. The limits are designed to

provide reasonable protection against harmful interference when the equipment

is operated in a commercial environment. This equipment generates, uses, and

can radiate frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference, in which case users will be required to correct the interference at

their own expense.

FCC Caution:

To ensure continued compliance, use only shielded interface cables when

connecting to computer or peripheral devices. Any changes or modications not

expressly approved by the party responsible for compliance could void the user’s

authority to operation this equipment.

PART DESCRIPTION & DIMENSION

1. Structure Illustration:

The gure above is the illustration of the housing, which may be used

with most of ICR real Day and Night cameras.

2. Dimension and Accessory

Accessory Pack

(1) Video sync cable (7) Spacer

(2) Day/night sync cable (8) 2 Screws (for tripod stand)

(3) Camera power cable (9) User manual

(4) BNC connector

(5) 3 Glands

(6) Hexagon screw driver

INSTALLATION

Take the bracket from the box and put the power cable and video

cable through the bracket then x the bracket to the wall. (Loose

the screws of the bracket for easy assembly if necessary.)

Secondly, take out the housing and open the side cover with

hexagon screw driver.

3.1

3.2

3. How to install the camera and bracket:

INSTALLATION

Put the power cable and video cable through the bottom of the

housing and let them pass from the hole.

Attention: Two solutions are available for waterproof: (1)

User can take out the spacer from the accessory pack and

stick it right by the outlet (Fig A) or (2) use the three glands

cover and let the power cable and video cable pass through

the hole of glands cover (Fig B).

3.3

Fig. B

Fig. A

INSTALLATION

IR LED driver board

Heater

board

Camera

position

Inner Part Denition

Fan

3.4 Open the side cover and you can see the housing inner part.

There are two installation types.

Power

Adpator

( only in

AC90~260V

housing)

power connector board (only

in AC90~260V housing)

Heater

INSTALLATION

3.5 Connect the power cable to the power port of the AC24V camera

and to the A section (L+: power +/ N-: power- ) as below.

Connect the outside AC24V power supply to the section B

(L+: power+/ N-: power- ).

Partial heater board

Note: For the AC90~260V housing type, connect the power cable

to the power port of the AC90~260V camera and to A section

(L+: power +/ N-: power- ). Connect the outside AC90~260V

power supply to the section B (L+: power+/ N-: power- ).

Partial power connector board

Tabla de contenidos

Otros manuales de Cámara de seguridad de Messoa

Messoa

Messoa SDF418 Manual de usuario

Messoa

Messoa SCB280 Manual de usuario

Messoa

Messoa NDR890 Manual de usuario

Messoa

Messoa SPD970 Manual de usuario

Messoa

Messoa NCC800 Manual de usuario

Messoa

Messoa SDF418 Manual de usuario

Messoa

Messoa NCB750 Manual de usuario

Messoa

Messoa NIC990 Manual de usuario

Messoa

Messoa NDR721 Manual de usuario

Messoa

Messoa NDR891 Manual de usuario

Messoa

Messoa SCB267-HN5 Manual de usuario

Messoa

Messoa PTZ900 Manual de usuario

Messoa

Messoa NDF820 Manual de usuario

Messoa

Messoa SCR368-HN5 Manual de usuario

Messoa

Messoa NDR891(H) Manual de usuario

Messoa

Messoa NCR875-HN5 Manual de usuario

Messoa

Messoa NDF831-HN5 Manual de usuario

Messoa

Messoa NDR890-HN5 Manual de usuario

Messoa

Messoa NID318 Manual de usuario

Messoa

Messoa LPR615 Manual de usuario

Messoa

Messoa NCB855E Manual de usuario

Messoa

Messoa ZEIM-4000604G A.1 Manual de usuario

Messoa

Messoa LPR610 Manual de usuario

Messoa

Messoa NOD316 Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario