MeshNetworks MEA WMC6300 Manual de usuario
WMC6300
Wireless Modem Card
User’s Guide
Version 1.0
DRAFT
DMM000001-01 Copyright2002, MeshNetworks, Inc. All Rights Reserved
WMC6300 Client User’s Guide
Foreword
This document describes in detail the confidential and proprietary technology of MeshNetworks’
™ Architecture. MeshNetworks products and technology are protected by US and
international patent and patent pending technology. This document represents the current
design; the contents are subject to change at any time at the discretion of MeshNetworks, Inc.
, MeshTray, and MeshNetworks’ logo are trademarks or registered trademarks of
MeshNetworks, Inc. Microsoft, Windows, Windows 2000 and Windows CE are registered
trademarks of Microsoft Corporation. All other product names and services identified
throughout this publication are trademarks or registered trademarks of their respective
companies. No such uses or the use of any trade name is intended to convey endorsement or
other affiliation with this publication. Copyright 2002, MeshNetworks, Inc. All Rights Reserved.
iii
MeshNetworks
iv
WMC6300 Client User’s Guide
Table of Contents
.......................................................................................................................................... 1
Introduction .......................................................................................................................... 1
System Requirements ......................................................................................................... 1
General System Requirements .........................................................................................1
What’s in the Box................................................................................................................. 2
INSTALLING THE SOFTWARE...................................................................................................3
Installing Software (Windows 2000 Clients Only) ................................................. 3
Configuring the DNS Address ............................................................................................ 8
Installing the Antenna Assembly on a Laptop Computer ................................................ 9
Installing the Magnetic Antenna Assembly (Optional)................................................... 11
Installing the WMC6300 Wireless Modem Card .............................................................. 12
Removing the WMC6300 Wireless Modem Card............................................................. 13
Uninstalling Application Software (Windows 2000 Clients Only) ................................14
OVERVIEW OF MESHNETWORKS’ MESHTRAY .................................................................... 15
MeshTray™......................................................................................................................... 15
MeshTray Status ................................................................................................................16
Starting MeshTray..............................................................................................................16
Terminating MeshTray....................................................................................................... 16
CUSTOMER SERVICE INFORMATION .................................................................................... 17
LICENSE AND WARRANTY INFORMATION ........................................................................... 18
Important Information........................................................................................................ 18
REGULATORY INFORMATION ................................................................................................ 21
FCC Information.................................................................................................................21
FCC RF Radiation Exposure Statement........................................................................... 21
Safety Information for the WMC6300.................................................................... 22
v
MeshNetworks
vi
WMC6300 Client User’s Guide
Introduction
Thank you for purchasing the WMC6300 Wireless Modem Card. Please install
the Application Software and Drivers before inserting the Wireless Modem
Card in your system. To get started proceed to the Installing the Software
section of this document.
is a wireless communication system capable of supporting high data rate
mobile communication at vehicular speeds. The system is designed to
allow standard client hosts with a PCMCIA interface to have a mobile broadband
Ethernet connection. The system works transparently to the client host in a
manner similar to an Ethernet connection. provides Internet Protocol based
data and location services. Its geo-location accuracy and availability is better
than ±10 meters within 1 second. It is capable of supporting subscribers
traveling up to 100 miles per hour.
Figure 1. MeshLAN WMC6300 Wireless Modem Card
The
hoclient st may still require configuration and authentication before it will be
allowed to access services on the core network. Access to the core network is
controlled by the network administrator according to current operating practice.
This document provides detailed installation and configuration instructions for
use when installing the WMC6300 Wireless Modem Card and its Software.
system pro s a secure and reliable transport for the client hvide ost. The
System Requirements
General System Requirements
ure the computers meet the following minimum
• Intel based Laptop or Notebook PC running the Microsoft Windows 2000
• rd disk storage
drive or DVD drive
d slot in the Host device
For best results, ens
requirements:
operating systems
5 MB of available ha
• Keyboard
• Mouse
• CD-ROM
• Available Type II PCMCIA car
1
MeshNetworks
What’s in the oB x
Each WMC6300 Wireless Modem Card is a full-featured wireless
networking interface. The following is a list of the items provided with each
WMC6300 card:
• WMC
• Hz Antenna with a 12 inch cable an
6300 Wireless Modem Card
2.4 G d MMCX connector
• Antenna Clip with adhesive backing
• WMC6300 Software and Documentation CD
Figure 2. What’s in the Box
The
to load the Adobe Acrobat Reader software.
Note: For best results, the WMC6300
CD contains an on-line version of the WMC6300 User’s Guide in
Adobe PDF format. If required, the CD also contains an installation executable
WMC6300 card into the device.
software should be installed before
you insert the
2
WMC6300 Client User’s Guide
Installing the Software
Installing Software (Windows 2000 Clients Only)
Note: Install the Software before installing the WMC6300 in your system.
Complete the following procedure to install the Software:
1. Insert the Software Installation CD into the computers’ CDROM
drive.
2. The Setup program will be displayed as shown in Figure 3.
Note: If the installation program does not start automatically, open the
Windows Start menu, click on Run, and then type d:setup.exe (where d
is the letter of the CD-ROM drive) and click the “OK” button.
Click the “Next” button to continue the installation process.3.
Figure 3. Installation Welcome Window
3
MeshNetworks
4.
5.
The “License Agreement” window will be displayed. Please review the
End User License Agreement. Use the scroll bar located at the right side
of the window to display the complete text message.
Note: If you do not agree with the terms of the license agreement, click
on “Cancel” and the installation will be terminated.
To continue with the installation process, click on the “YES” button as
shown in Figure 4 and then click on “Next” to continue the installation.
Figure 4. Agree with License Agreement Window
6. The “Ready to Install” window will be displayed as shown in Figure 5.
The user can modify the default installation configuration by checking or
un-checking the boxes on this installation window. Click on “Next” to
continue the installation process.
Figure 5. Ready to Install Window
4
WMC6300 Client User’s Guide
7. The setup program allows the user to change the default installation
folder as shown in Figure 6. Click on “Next” to accept the location to
install the software to and continue the installation process.
Figure 6. Installation Folder Location
8. The setup program allows the user to change the default name
() of the Shortcut folder as shown in Figure 7. Click on “Next” to
accept the name and continue the installation process.
Figure 7. Shortcut Name Selection
5
Otros manuales para MEA WMC6300
3
Tabla de contenidos
Otros manuales de Módem de MeshNetworks
Manuales populares de Módem de otras marcas
US Robotics
US Robotics 3453C Manual de usuario
MaxTech
MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manual de usuario
Zte
Zte MF823 Manual de usuario
Four-Faith
Four-Faith F1403 Manual de usuario
Sierra Wireless
Sierra Wireless AIRLINK MP595W Manual de usuario
Gemtek
Gemtek WiMAX WIXFBR-103 Manual de usuario