Menabo paddy ALERT Manual de usuario
EN
FR
ES
IT
Owner’s manual
Manuel d’utilisation
Instrucciones
Istruzioni d’uso
000121300000
2
English
Français
Español
Italiano
pag.3
pag.3
pag.3
pag.3
EN FR ES IT
3
ENGLISH
Owner’s manual
4
About the product
PADDY ALERT Keyring is an accessory device operating with the PADDY Smart Pad
phone APP: it works as a reminder in case the driver leaves both the mobile phone
and the child in the vehicle. In such case the device will activate a sound and visual
alarm. If the baby is not removed from the seat within 30 seconds, and the alert
silenced, the mobile APP will send a message including the GPS co-ordinates of
the place where the alarm was generated to the predened associated users.The
keyring device must be paired with the APP and can handle up to four seat pads
simultaneously.
Box content
• 1 x PADDY ALERT alarm device
• 1 x Key Ring and string
• 1 x Owner’s Manual
How to use PADDY ALERT
When connected to the APP, PADDY ALERT will work as a secondary alarm.
If connected directly with the PADDY Smart Pad it will function as primary alarm.
1”
EN FR ES IT
5
USING THE DEVICE WITH THE APP
PADDY ALERT needs to be activated only
the rst time by pressing down the switch
for 1 second.The actual connection will
be conrmed by a red LED ashing once.
However, if the battery is charged 20% or
less, the red LED will ash continuously,
along with an alarm tone, warning that the battery needs to be replaced.To pair
the device with the APP, press the icon on the screen and then the connect bar, as
shown below.
The device will automatically pair with the App and when the device is paired, the
photo of the device will switch from black and white to full color.
6
Once paired, press the BACK bar to return to the main APP screen. A new battery
charge level indicator will appear above the PADDY logo as shown below.This
conrms that the Alert device is now operational.
The device is now paired and shall connect to the APP automatically. It will set o
an alarm only in case the user has left the mobile phone and an unattended child
in the vehicle.
EN FR ES IT
7
In case the driver steps away from the vehicle and the mobile phone has been
left in the car, along with an unattended child in the car seat, after a distance of
approximately 10-15 meters the device will switch to the“alarm mode”, activating a
sound alarm and the LED shall ash continuously.
The device shall remain in such mode until the alarm is deactivated and the child
removed from the seat. If the alarm is not deactivated by pressing the button on the
device or by removing the child from the car seat within 30 seconds, the APP will
send a message to all the predened associated users such as:
“(NAME OFTHE CHILD) HAS BEEN ABANDONED AT GPS 22.3213N 113.9433E)”.
The associated users can access the map on the phone and view the exact location
where the child was left unattended. Then they can contact the other users and
proceed to rescue the unattended child.
If the driver presses the PADDY ALERT button for at least one second, the LED will
ash from 1 to 4 times and will also show the battery charge. If it only ashes once,
then the battery needs to be replaced.
8
USING THE DEVICE WITHOUT THE APP
PADDY ALERT can be used with PADDY Smart Pad as an alarm that shall go o when
the user moves away from the vehicle and the child has been left unattended in
the car seat.The alarm will be both audio and visual and shall remain active until
the child is removed from the PADDY Smart Pad. The device must be paired with
the PADDY Smart Pad. Press the button for 1 second to turn on the device: a beep
will conrm the device is ON. Press the button again for 6 seconds to turn on the
pairing mode (only the rst time). Press the center of the PADDY Smart Pad until a
beep sound is heard: the device is now connected to the Smart Pad. The LED ashes
every 8/10 seconds if the battery of the Smart Pad is charged; otherwise the LED will
ash continuously.
• If the connection with one or more Pads is lost, the device will go into the alarm
mode.
• To stop the alarm mode, press the button for 1 second.
• To cancel the present operating connection press down the button for 6 seconds
with the power ON.
• To erase all paired PADDY Smart Pad connections, hold down the button for 15
seconds: a conrmation beep will be heard.
• If PADDY ALERT is connected the rst time with the APP it will act as a secondary
alarm, otherwise it will function as primary alarm.
EN FR ES IT
9
WARRANTY
PADDY ALERT enjoys a Limited LifeWarranty against any defects of non-compliance
under normal operating conditions of use. Please refer to the Warranty notice
enclosed to this Owner’s Manual. Note: the battery is not included in the warranty as
it is a consumable item and must be replaced as needed.
DECLARATION OF COMPLIANCE
Menabò declare that this PADDY ALERT key ring device complies with and conforms
to all the necessary EU regulations and directives.The product is CE and FCC certied.
It also includes EMC, RED and ROHS compliant.The product can be used in all Eu
countries, USA, Canada, UAE, Asia, Oceania and Pacic regions.
Il testo completo della dichiarazione di conformità UE è disponibile al seguente
indirizzo internet www.paddysmartpad.com
Customer Support
For further information and assistance, please contact us by sending an email to this
address: customercare@paddysmartpad.com
10
FRANÇAIS
Manuel d’utilisation
Otros manuales para paddy ALERT
1
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Idiomas:
Otros manuales de Sistema de seguridad de Menabo
Manuales populares de Sistema de seguridad de otras marcas
EDM
EDM Solution 6+6 Wireless-AE Manual de usuario
Highway Safety Group
Highway Safety Group EA401 Manual de usuario
Siren
Siren LED GSM Manual de usuario
Detection Systems
Detection Systems 7090i Instrucciones de montaje
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Manual de usuario
Siemens
Siemens FDM273 Manual de usuario