MEN NL30 Manual de usuario

User Manual



NL30

Robust 12-Port Fully Managed Ethernet Switch

Layer 2/3 Switch with M12 Front Connectors & Fiber Option

2019-02-1320NL30-00 E1

20NL30-00 E1 2019-02-13 Page 2

Contents

Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

About this Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Product Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Product Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

1 Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

1.1 Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

1.2 Product Architecture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

1.2.1 Interfaces. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

1.2.2 Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

1.3 Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

1.4 Cooling Concept . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

1.5 Product Identification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

2 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

2.1 Unpacking the NL30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

2.2 Mounting the NL30. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

2.2.1 Safety Instructions for Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

2.2.2 Mounting on a Wall or a Horizontal Surface . . . . . . . . . . . . . . . . . .18

2.3 Connecting and Starting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

2.3.1 Safety Instructions for Connection . . . . . . . . . . . . . . . . . . . . . . . . . .19

2.3.2 Connecting an Earthing Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

2.3.3 Connecting the Devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

2.3.4 Connecting the Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

2.4 Accessing the Ethernet Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

2.4.1 Web Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

2.4.2 Command Line Interface (CLI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

2.5 Configuring Basic Switch Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

2.5.1 Resetting the Configuration to Factory Defaults . . . . . . . . . . . . . . .24

2.5.2 Setting the Device Hostname . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

2.5.3 Setting a Password for the Admin User . . . . . . . . . . . . . . . . . . . . . .24

2.5.4 Setting the VLAN 1 IP Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

2.5.5 Displaying and Saving the Configuration . . . . . . . . . . . . . . . . . . . . .26

3 Functional Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

3.1 Power Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

3.2 Isolation Voltages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

3.3 Ethernet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

3.3.1 Front Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

3.3.2 Ethernet Status LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

3.3.3 Ethernet Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

3.4 RS232 (Console). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

3.4.1 Front Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

3.5 Status LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

20NL30-00 E1 2019-02-13 Page 3

Contents

4 Switch Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

5 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

5.1 Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

5.2 Updating the Switch Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

Figures

Figure 1. Front interfaces (housing with or without fiber option). . . . . . . . . . . . . . . . . .11

Figure 2. Functional diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Figure 3. Product label. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Figure 4. Power configuration and coding labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Figure 5. Accessing the help option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Tables

Table 1. Connector types – power supply (4-pin M12 A-coded). . . . . . . . . . . . . . . . . . .28

Table 2. Pin assignment - power supply (4-pin M12 A-coded) . . . . . . . . . . . . . . . . . . . .28

Table 3. Signal mnemonics – power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Table 4. Isolation voltages (with A- or/and D-coded connectors) . . . . . . . . . . . . . . . . . 28

Table 5. Isolation voltages (with X-coded connectors) . . . . . . . . . . . . . . . . . . . . . . . . . .28

Table 6. Connector types – Ethernet (4-pin, M12, D-coded) . . . . . . . . . . . . . . . . . . . . . . 29

Table 7. Pin assignment – Ethernet (4-pin M12). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Table 8. Signal mnemonics – Ethernet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Table 9. Connector types – Ethernet (8-pin M12). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Table 10. Pin assignment – Ethernet (8-pin M12). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Table 11. Signal mnemonics – Ethernet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Table 12. Connector types – Ethernet M12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Table 13. Pin assignment – Ethernet (8-pin M12). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Table 14. Signal mnemonics – Ethernet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Table 15. Connector types – Q-ODC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Table 16. Pin assignment – Q-ODC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Table 17. Signal mnemonics – Q-ODC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Table 18. Ethernet status LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Table 19. Default switch configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

Table 20. Connector types – RS232 M12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

Table 21. Pin assignment – RS232 M12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Table 22. Signal mnemonics – RS232 M12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

Table 23. General status LEDs at front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

20NL30-00 E1 2019-02-13 Page 4

About this Document

This document is intended only for system developers and integrators.

It describes the design, functions and connection of the product. The manual does not

include detailed information on individual components (data sheets etc.).

History

NL30 product page with up-to-date information and downloads:

www.men.de/products/nl30/

Issue Comments Date

E1 First issue 2019-02-13

20NL30-00 E1 2019-02-13 Page 5

About this Document

Conventions

Indicates important information or warnings concerning situations which

could result in personal injury, or damage or destruction of the

component.

Indicates important information concerning electrostatic discharge which

could result in damage or destruction of the component.

Indicates important information or warnings concerning proper

functionality of the product described in this document.

The globe icon indicates a hyperlink that links directly to the Internet.

When no globe icon is present, the hyperlink links to specific information

within this document.

Italics Folder, file and function names are printed in italics.

Comment Comments embedded into coding examples are shown in green text.

IRQ#

/IRQ

Signal names followed by a hashtag "#" or preceded by a forward slash "/"

indicate that this signal is either active low or that it becomes active at a

falling edge.

In/Out Signal directions in signal mnemonics tables generally refer to the

corresponding board or component, "in" meaning "to the board or

component", "out" meaning "from the board or component".

0xFF Hexadecimal numbers are preceded by "0x".

0b1111 Binary numbers are preceded by "0b".

20NL30-00 E1 2019-02-13 Page 6

Product Safety

Read the user manual carefully before using the product. Keep the user manual for later

reference.

Conditions for Use, Field of Application

The product is designed to function correctly in the market, application area and

environmental conditions specified in the applicable standards which are listed in the

Technical Data.

Use cases in environments exceeding the specifications in the applicable standards and

the Technical Data have to be agreed upon between MEN and the customer.

Electrostatic Discharge (ESD)

Qualified Personnel

The product/system described in this documentation may be operated only by

personnel qualified for the specific task in accordance with the relevant documentation,

in particular its warning notices and safety instructions. Qualified personnel are those

who, based on their training and experience, are capable of identifying risks and

avoiding potential hazards when working with these products/systems.

Computer boards and components contain electrostatic sensitive devices.

Electrostatic discharge (ESD) can damage components. To protect the PCB

and other components against damage from static electricity, follow some

precautions whenever you work on your computer.

Power down and unplug your computer system when working on the

inside.

Hold components by the edges and try not to touch the IC chips, leads,

or circuitry.

Use a grounded wrist strap before handling computer components.

Place components on a grounded antistatic pad or on the bag that came

with the component whenever the components are separated from the

system.

Only store the product in its original ESD-protected packaging. Retain

the original packaging in case you need to return the product to MEN for

repair.

20NL30-00 E1 2019-02-13 Page 7

Product Compliance

MEN products are no ready-made products for end users. They are tested according to

the standards given in the Technical Data and thus enable you to achieve certification of

the product according to the standards applicable in your field of application.

If the product delivered was certified by MEN and is modified by the customer, e.g., by

installing an additional hardware component, the certification achieved by MEN

becomes invalid and has to be repeated for the new product configuration.

RoHS

MEN is committed to develop and produce environmentally compatible products

according to the Restriction of Hazardous Substances (RoHS) Directive 2011/65/EU

(formerly 2002/95/EC) of the European Union.

Since July 1, 2006 all MEN standard products comply with RoHS legislation.

REACH

MEN is a manufacturer of electronic products and thus a so-called "downstream user" in

terms of REACH. The products MEN supplies are solely non-chemical goods. Moreover

and under normal and reasonably foreseeable circumstances of application, the goods

supplied shall not release any substance.

Beyond that, according to REACH – Art.33, MEN will inform the customer immediately

should a substance contained in an MEN product (with a content of > 0.1%) be classified

alarming by the European Chemicals Agency (ECHA).

WEEE Application

Nevertheless, MEN is registered as a manufacturer in Germany. The registration number

can be provided on request.

The WEEE directive does not apply to fixed industrial plants and tools. The

compliance is the responsibility of the company which puts the product

on the market, as defined in the directive; components and sub-

assemblies are not subject to product compliance.

Since MEN does not deliver ready-made products to end users, the WEEE

directive is not applicable for MEN. Users are nevertheless recommended

to properly recycle all electronic boards which have passed their life cycle.

20NL30-00 E1 2019-02-13 Page 8

Disclaimer

Changes

MEN Mikro Elektronik GmbH ("MEN") reserves the right to make changes without further

notice to any products herein.

Liability

MEN makes no warranty, representation or guarantee of any kind regarding the

suitability of its products for any particular purpose, nor does MEN assume any liability

arising out of the application or use of any product or circuit, and specifically disclaims

any and all liability, including, without limitation, consequential or incidental damages.

TO THE EXTENT APPLICABLE, SPECIFICALLY EXCLUDED ARE ANY IMPLIED WARRANTIES

ARISING BY OPERATION OF LAW, CUSTOM OR USAGE, INCLUDING WITHOUT LIMITATION,

THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE OR USE. In no event shall MEN be liable for more than the contract price for

the products in question. If buyer does not notify MEN in writing within the foregoing

warranty period, MEN shall have no liability or obligation to buyer hereunder.

Should the customer purchase or use MEN products for any unintended or

unauthorized application, the customer shall indemnify and hold MEN and its officers,

employees, subsidiaries, affiliates, and distributors harmless against all claims, costs,

damages, and expenses, and reasonable attorney fees arising out of, directly or

indirectly, any claim or personal injury or death associated with such unintended or

unauthorized use, even if such claim alleges that MEN was negligent regarding the

design or manufacture of the part. In no case is MEN liable for the correct function of the

technical installation where MEN products are a part of.

The publication is provided on the terms and understanding that:

1. MEN is not responsible for the results of any actions taken on the basis of

information in the publication, nor for any error in or omission from the publication; and

2. MEN is not engaged in rendering technical or other advice or services.

MEN expressly disclaims all and any liability and responsibility to any person, whether a

reader of the publication or not, in respect of anything, and of the consequences of

anything, done or omitted to be done by any such person in reliance, whether wholly or

partially, on the whole or any part of the contents of the publication.

20NL30-00 E1 2019-02-13 Page 9

Contacts

Germany

MEN Mikro Elektronik GmbH

Neuwieder Straße 1-7

90411 Nuremberg

Phone +49-911-99 33 5-0

France

MEN Mikro Elektronik SAS

18, rue René Cassin

ZA de la Châtelaine

74240 Gaillard

Phone +33-450-955-312

[email protected]

www.men.de

[email protected]

www.men-france.fr

USA

MEN Micro Inc.

860 Penllyn Blue Bell Pike

Blue Bell, PA 19422

Phone 215-542-9575

China

MEN Mikro Elektronik (Shanghai) Co., Ltd.

Room 1215, #993 West Nanjing Road

Shanghai 200041

Phone +86-21-5058-0963

[email protected]om

www.menmicro.com

[email protected]

www.men-china.cn

Product Overview

20NL30-00 E1 2019-02-13 Page 10

1 Product Overview

1.1 Product Description

"NL" Family Principle

MEN's "NL" Ethernet switch family principle is based on a wide range of configuration

options (e.g., amount of Ethernet ports, fiber connections or Power over Ethernet) to

easily adapt the switch to application requirements.

Flexible Concept in a Small Housing

The NL30 is a 12+2-port fully managed layer 2/3 Ethernet switch, providing a wide range

of configuration options with 12 M12 Gigabit Ethernet ports. M12 connectors can be

configured to be A-, D- or X-coded and combinations are also possible. The X-coded

connectors are designed as push-pull and screwed variants (Harting concept). The NL30

offers two optional Ethernet fiber ports with 1000BASE-SX as standard variant. The

mechanical concept is an extremely compact, high-quality aluminum housing providing

high port density and ultra-high ruggedness. It is designed for wall-mounting, but

mounting in a 19" rack is also an option. Product models without optional fiber ports are

available in a housing with reduced height.

Performance, Security and Diagnostic Features

The 29 Gbit/s, TCAM based, store-and-forward switching matrix of the NL30 allows high-

performance layer 2 switching over all connected interfaces. For easy remote

management and access, layer 3 protocols, e.g., IPv4/IPv6 and DHCP, are integrated. The

switch provides extended security features like SNMPv3, SSH and HTTPS. Traffic isolation

(VLAN) and switching redundancy protocols (e.g., STP, RSTP, MSTP) provide safe running

of the network using redundant data paths in the event of a fault. The ITU-T G.8031/

G.8032 ring and linear protection switching feature set makes NL30 able to create

network ring scenarios with recovery time under 50 ms. Monitoring and diagnosis

functions, e.g., sFlow or SNMPv1, v2c, v3 are provided.

Wide-Range Power Supply

The EN 50155 compliant supply voltage range of 24 V DC to 110 V DC provides maximum

flexibility for using the switch.

Maintenance Free and Extremely Rugged

The NL30 is designed for fanless operation at temperatures ranging from -40 °C to

+70 °C (10 min @ +85 °C). The cooling fins serve as a heat sink for the internal

electronics. It is maintenance-free and developed specifically for rough environmental

conditions in rolling stock applications. Long-term availability until 2026 from product

start minimizes lifecycle management by making the system available at least for this

period of time.

Tabla de contenidos

Otros manuales de Enrutador de red de MEN

MEN

MEN NL31 Manual de usuario

MEN

MEN NL33 Manual de usuario

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

Billion

Billion BIPAC 5102 Series Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

Cisco

Cisco NCS 540 Manual

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

Cisco

Cisco ASR 1000 Series Manual del operador

EnGenius

EnGenius ESR-9710 Manual de usuario

Cisco

Cisco 805 Series Instrucciones de funcionamiento y seguridad