MeiTrack IButton T1 Manual de usuario

MEITRACK iButton User Guide

Applicable Model: T1/T333/MVT600/T622

MEITRACK iButton User Guide

Change History

File Name

MEITRACK iButton User Guide

Created By

Owen Cheng

Project

T1/T333/MVT600/T622

Creation Date

Update Date

2015-08-13

2015-11-23

Subproject

Accessory User Guide

Total Pages

Version

V1.0

Confidential

External Documentation

MEITRACK iButton User Guide

Contents

1 Copyright and Disclaimer...............................................................................................................................................................- 4 -

2 Specifications.................................................................................................................................................................................- 4 -

3 Main Device and Accessory ...........................................................................................................................................................- 4 -

4 iButton Functions ..........................................................................................................................................................................- 5 -

5 Firmware Version ..........................................................................................................................................................................- 5 -

6 Installing the iButton Reader .........................................................................................................................................................- 5 -

6.1 Attaching the iButton Reader to Your Vehicle ....................................................................................................................- 5 -

6.2 Connecting the iButton Reader to a Tracker.......................................................................................................................- 5 -

7 Using iButton .................................................................................................................................................................................- 6 -

7.1 Obtaining iButton ID ...........................................................................................................................................................- 6 -

7.2 iButton Control Output (Starting the Engine) .....................................................................................................................- 6 -

7.3 How iButton Works ............................................................................................................................................................- 8 -

7.4 Configuring iButton by Meitrack Manager .........................................................................................................................- 8 -

7.5 Configuring iButton by MS03..............................................................................................................................................- 9 -

7.5.1 Authorizing iButton Keys..........................................................................................................................................- 9 -

7.5.2 Deleting Authorized iButton Keys ..........................................................................................................................- 10 -

7.5.3 Managing iButton Keys ..........................................................................................................................................- 11 -

8 Querying Reports on MS03 .........................................................................................................................................................- 12 -

8.1 Event Report.....................................................................................................................................................................- 13 -

8.2 Driver I/O Status Report ...................................................................................................................................................- 13 -

MEITRACK iButton User Guide

1Copyright and Disclaimer

and are trademarks that belong to Meitrack Group.

The user manual may be changed without notice.

Without prior written consent of Meitrack Group, this user manual, or any part thereof, may not be reproduced for any

purpose whatsoever, or transmitted in any form, either electronically or mechanically, including photocopying and recording.

Meitrack Group shall not be liable for direct, indirect, special, incidental, or consequential damages (including but not limited to

economic losses, personal injuries, and loss of assets and property) caused by the use, inability, or illegality to use the product

or documentation.

2Specifications

Item

Specifications

Dimension

17.35 mm x 3.1 mm–5.89 mm

Material

304 stainless steel

Operating temperature

-40°C to 85°C

Communication protocol

1-wire protocol

3Main Device and Accessory

iButton reader

iButton key

Buzzer (optional)

MEITRACK iButton User Guide

4iButton Functions

Identify the driver ID and grant permission to start the vehicle.

Through MS03 platform, drivers' attendance can be collected by driver I/O status history.

5Firmware Version

All firmware supports iButton. T1B_V010 and later versions: If output 2 is

connected to a buzzer, a "beep" sound will be made.

T333

All firmware supports iButton. T333_V009 and later versions: If output 2 is

connected to a buzzer, a "beep" sound will be made.

MVT600

All firmware supports iButton. If output 2 is connected to a buzzer, a "beep"

sound will not be made.

T622

All firmware supports iButton. If output 1 or output 2 is connected to a

buzzer, a "beep" sound will be made.

6Installing the iButton Reader

6.1 Attaching the iButton Reader to Your Vehicle

Attach the iButton reader to your vehicle according to your needs.

6.2 Connecting the iButton Reader to a Tracker

Plug the iButton reader connector into a tracker's dedicated port for a temperature sensor. The dedicated port is as

follows:

According to the above figure, the tracker's dedicated port for a temperature sensor is on the left, while the iButton

reader connector is on the right.

iButton reader's status after it is connected to a tracker

After the iButton reader is connected to a tracker, once the iButton key touches the reader, the reader will be activated. If

output 2 is connected to a buzzer, a "beep" sound will be made.

MEITRACK iButton User Guide

7Using iButton

For details about how to use iButton, see the following sections.

7.1 Obtaining iButton ID

Each iButton key has an ID number, which is in hexadecimal format.

For example, the last six digits among the hexadecimal digits are "1BF32F". Their decimal digits are "1831727", so the iButton

ID number is 1831727.

7.2 iButton Control Output (Starting the Engine)

Before starting the engine, ensure that:

1. Input 3 of the tracker is connected to the engine detection cable.

2. An iButton key has been authorized.

3. Output 1 of the tracker is connected to the engine control cable through a relay, as shown in the following figure.

MEITRACK iButton User Guide

Note: For details about how to authorize an iButton key, see the section 7.5.1 "Authorizing iButton Keys."

4. The RFID control output 1 function has been enabled by Meitrack Manager or MS03.

MEITRACK iButton User Guide

Note: For T622, both the RFID control output 1 and output 2 are available.

7.3 How iButton Works

After the authorized iButton key touches the iButton reader, the driver must start the engine within one minute. Otherwise,

output 1 of the tracker will be triggered (engine cut-off), and thus the driver cannot start the vehicle. At the moment, if you

want to start the engine, you must swipe the iButton key again.

7.4 Configuring iButton by Meitrack Manager

1. Connect your tracker to a computer and run Meitrack Manager.

MEITRACK iButton User Guide

2. Meitrack Manager will automatically detect the device, and the Device tab page for default parameters is displayed.

3. Select Authorize. On the tab page that is displayed, select RFID on the GPRS column.

Note: If this RFID option is deselected, the MS03 platform cannot collect statistics on iButton event reports after you swipe an

iButton key. The RFID event is enabled by default.

7.5 Configuring iButton by MS03

You can authorize, delete, query, and manage iButton keys on MS03. Related commands are as follows:

Function

Command

Authorize iButton keys

Authorizing an RFID Card –D10

Authorizing RFID Cards in Batches –D11

Delete iButton keys

Deleting Authorized RFIDs in Batches –D15

Manage iButton keys

On the Management page, set driver info and RFID card.

Query iButton keys

Checking RFID Authorization –D12

7.5.1 Authorizing iButton Keys

1. On the main interface, choose Management.

2. On the Management window that is displayed, select Sending command from Use Normal. The Sending command

window is displayed.

3. Select one or multiple trackers, select the Batch RFID authorization command, specify From the RFID number and

Quantity, and click Send command.

If only one iButton key needs to be authorized, set Quantity to 1.

MEITRACK iButton User Guide

7.5.2 Deleting Authorized iButton Keys

1. On the main interface, choose Management.

2. On the Management window that is displayed, select Sending command from Use Normal. The Sending command

window is displayed.

3. Select one or multiple trackers, select the Delete authorized RFID numbers in batches command, specify From the RFID

number and Quantity, and click Send command.

If only one authorized iButton key needs to be deleted, set Quantity to 1.

Otros manuales para iButton T1

Este manual sirve para los siguientes modelos

Tabla de contenidos

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario

MeiTrack iButton T1 Manual de usuario

Manuales populares de Unidad de control de otras marcas