MeiTrack T399 Manual de usuario

MEITRACK T399 Bluetooth Vehicle Tracker User Guide

MEITRACK T399 Bluetooth Vehicle Tracker

User Guide

MEITRACK T399 Bluetooth Vehicle Tracker User Guide

Change History

File Name

MEITRACK T399 Bluetooth Vehicle Tracker User Guide

Project

T399 Bluetooth vehicle tracker

Creation Date

Update Date

2020-12-18

2020-02-05

Subproject

User Guide

Total Pages

Version

V1.1

Confidential

External Documentation

MEITRACK T399 Bluetooth Vehicle Tracker User Guide 
Copyright © Meitrack Group 2021. All rights reserved. - 3 - 
Contents 
Copyright and Disclaimer........................................................................................................................................... - 4 -
Product Introduction ................................................................................................................................................. - 4 -
1 Product Features........................................................................................................................................... - 4 -
1.1 Harsh Acceleration, Harsh Braking, Sharp Left Turn and Sharp Right Turn Alerts................................ - 4 -
1.2 GPS Data Filtering ................................................................................................................................ - 4 -
1.3 Setting the Output Port Status Based on Events.................................................................................. - 5 -
1.4 Idling Detection.................................................................................................................................... - 5 -
1.5 Changing the I/O Port Mode................................................................................................................ - 5 -
1.6 Starting the Engine by RFID or iButton ................................................................................................ - 5 -
1.7 CAN Bus Interface(Optional)................................................................................................................ - 5 -
Product Functions and Specifications........................................................................................................................ - 6 -
1 Product Functions......................................................................................................................................... - 6 -
1.1 Position Tracking.................................................................................................................................. - 6 -
1.2 Anti-Theft............................................................................................................................................. - 6 -
1.3 Other Functions ................................................................................................................................... - 6 -
1.4 Functions of Optional Accessories....................................................................................................... - 7 -
2 Product Specifications .................................................................................................................................. - 7 -
2.1 Interface Definition.............................................................................................................................. - 8 -
Main Device and Accessories .................................................................................................................................. - 10 -
Product Appearance................................................................................................................................................ - 11 -
First Use................................................................................................................................................................... - 11 -
1 Installing a SIM Card ................................................................................................................................... - 11 -
2 LED Indicator............................................................................................................................................... - 12 -
3 Device Configuration .................................................................................................................................. - 12 -
3.1 Installing the USB Driver .................................................................................................................... - 12 -
3.2 Configuring Device Parameters by Meitrack Manager....................................................................... - 13 -
3.3 Setting the Bluetooth Temperature and Humidity Sensor and Beacon by Meitrack Manager .......... - 14 -
4 Tracking by Mobile Phone........................................................................................................................... - 16 -
5 Common SMS Commands .......................................................................................................................... - 17 -
5.1 Querying the Location in Real Time – A00......................................................................................... - 17 -
5.2 Setting Authorized Phone Numbers – A71 ........................................................................................ - 18 -
5.3 Setting the Smart Sleep Mode – A73................................................................................................. - 18 -
5.4 Setting the Idling Alert – B14............................................................................................................. - 18 -
5.5 Setting the Harsh Acceleration or Harsh Braking Alert – BBD............................................................ - 19 -
5.6 Setting the Sharp Left Turn or Sharp Right Turn Alert – BC6.............................................................. - 19 -
5.7 Controlling Output Status – C01 ........................................................................................................ - 20 -
5.8 Setting I/O Port Status – C08 ............................................................................................................. - 20 -
Logging In to MS03 Tracking System........................................................................................................................ - 21 -
Configuring the Meitrack Manager App .................................................................................................................. - 21 -
Mounting the Device............................................................................................................................................... - 23 -
 
 

MEITRACK T399 Bluetooth Vehicle Tracker User Guide

1Copyright and Disclaimer

, and are trademarks that belong to Meitrack Group and its subsidiary.

The user manual may be changed without notice.

Without prior written consent of Meitrack Group, this user manual, or any part thereof, may not be reproduced for any

purpose whatsoever, or transmitted in any form, either electronically or mechanically, including photocopying and

recording.

Meitrack Group shall not be liable for direct, indirect, special, incidental, or consequential damages (including but not

limited to economic losses, personal injuries, and loss of assets and property) caused by the use, inability, or illegality

to use the product or documentation.

2Product Introduction

The T399 is a vehicle tracker featuring the IP67 water resistance rating, internal Bluetooth module and internal GPS and

GSM antennas. This tracking unit can work properly in harsh environments. It can be connected to Bluetooth beacons

and Bluetooth temperature and humidity sensors and is specially designed for different types of vehicles, such as cars,

motorcycles, yachts, and refrigerator trucks.

2.1 Product Features

2.1.1 Harsh Acceleration, Harsh Braking, Sharp Left Turn and Sharp Right Turn Alerts

Users can set the thresholds of harsh acceleration, harsh braking, sharp left turn and sharp right turn alerts by using

Meitrack Manager software and a command.

Note: For details about how to set these thresholds on Meitrack Manager, see the following figure.

For details about how to set these thresholds by a command, see the BBD and BC6 commands.

Users can install the device in any direction.

2.1.2 GPS Data Filtering

The GPS data filtering function can ensure GPS data accuracy and eliminate static drift.

MEITRACK T399 Bluetooth Vehicle Tracker User Guide

You can set the following parameters by Meitrack Manager: GPS speed range, GPS positioning accuracy, and Number

of GPS satellites. After the GPS data filtering function is enabled, if all conditions are met, GPS data will be updated.

Note: This function can be enabled by Meitrack Manager only.

2.1.3 Setting the Output Port Status Based on Events

Users can control the output port status based on events.

For example:

1. When the device detects speeding, the buzzer makes sounds.

2. When the device detects unauthorized ignition or GPS antenna cut-off, the engine fails to be started.

3. When the device detects that the iButton reader or RFID reader is triggered, the engine starts.

4. When the device detects that an input is activated or inactivated, the output port is active or inactive.

2.1.4 Idling Detection

This function is used to detect whether a vehicle's engine is switched off while parking. To enable the function, input 2

must be connected to the ACC detection cable.

When the device detects that the ACC is on and the driving speed is 0 for one consecutive minute (default time), an

idling alert will be sent.

For details, see the section 6.5.4 "Setting the Idling Alert – B14."

2.1.5 Changing the I/O Port Mode

This function is used to change the I/O port mode. For example, change the active negative input to the analog port or

positive input.

For details, see the section 6.5.8 "Setting I/O Port Status – C08."

2.1.6 Starting the Engine by RFID or iButton

After swiping the authorized RFID card or iButton key, the driver must start the engine within one minute. Otherwise,

the device's output 1 will be triggered (engine cut-off), and thus the driver cannot start the vehicle. If you want to start

the engine, you must swipe the iButton key or RFID card again.

Before starting the engine, ensure that:

1. The device's input 2 is connected to the engine detection cable.

2. An iButton key or a RFID card has been authorized.

3. The device's output 1 is connected to the engine control cable through a relay.

4. The RFID ignition function has been enabled by Meitrack Manager or MS03 tracking platform.

5. The RFID event has been enabled on Meitrack Manager. Otherwise, the function will be unavailable.

2.1.7 CAN Bus Interface(Optional)

The device can read CAN bus data of a vehicle that supports the FMS protocol.

MEITRACK T399 Bluetooth Vehicle Tracker User Guide

The following data can be read: vehicle speed, vehicle control status, accelerator pedal position (%), total fuel

consumption,engine rotational speed, total engine run time, total mileage, engine coolant temperature, fuel level,

engine torque, ambient temperature, torque at current speed, fuel consumption rate, axle weight, service distance, and

instantaneous fuel consumption.

Note:

1. To obtain the preceding data, the vehicle must support the FMS protocol.

2. Install the device based on vehicle types. Connect vehicle's CANH and CANL wires to tracker's CANH and CANL 2.

connectors respectively

3. Interface definition is as follows:

CAN-H

CAN-L

Pin Number

Cable Color

Description

11(CAN-H)

Purple

Used to connect a CAN bus peripheral.

12(CAN-L)

Brown

Used to connect a CAN bus peripheral.

3Product Functions and Specifications

3.1 Product Functions

3.1.1 Position Tracking

⚫GNSS + LBS positioning

⚫Real-time location query

⚫Tracking by time interval

⚫Tracking by distance

⚫Tracking by mobile phone

⚫Speeding alert

⚫Cornering report

3.1.2 Anti-Theft

⚫Polygonal geo-fence

⚫Engine or vehicle door status alert

⚫Remote vehicle fuel or power cut-off

⚫GPS blind spot alert

⚫Towing alert

3.1.3 Other Functions

⚫SMS or GPRS (TCP or UDP) communication (Meitrack protocol)

⚫Built-in 8 MB flash for recording driving routes

⚫IP67 water resistance rating

⚫Mileage report

⚫Roaming parameter settings

MEITRACK T399 Bluetooth Vehicle Tracker User Guide

⚫Smart power-saving mode

⚫Built-in 3-axis accelerometer

⚫Online Parameter Editor (only for the MS03 platform)

⚫GPS data filtering

⚫Set the output port status based on events

⚫Stop Moving and Start Moving alerts

⚫Vehicle power protection

⚫Idling alert

⚫AGPS

⚫Internal Bluetooth module

⚫Support a CAN bus interface(Optional)

3.1.4 Functions of Optional Accessories

Accessory

Description

iButton reader and iButton key

Identify the driver ID and grant permission to start the vehicle.

A53 fuel level sensor

Check the fuel level and detect a fuel theft alert.

Wired digital temperature sensor

Check temperature. (At most eight wired temperature sensors

are supported, and a sensor must be connected to the A61

sensor box.)

400 mAh/3.7 V high temperature resistant

battery (-5°C to 75°C)

The device can continuously work after the external power

supply is cut off.

When the battery power is low, a low battery alert will be sent.

Bluetooth temperature and humidity sensor

Check temperature (-20°C to 55°C) and humidity (0% to 100%

RH). (A maximum of four Bluetooth temperature and humidity

sensors are supported.)

Bluetooth beacon

Detect the location of the tracker or Bluetooth beacon. (A

maximum of 16 Bluetooth beacons are supported.)

3.2 Product Specifications

Item

Specifications

Dimension

80.5 mm x 60 mm x 23.5 mm

Weight

100g

I/O power cable length

50 cm

Power supply

DC 11.4–90 V/1.5 A

Battery

Internal 400 mAh battery (normal temperature resistant: -20°C to 60°C)

Power consumption

Current in standby mode: 65 mA

Operating temperature

-35°C to 80°C (for the device without a battery)

-5°C to 75°C (for the device with a high temperature resistant battery)

Operating humidity

5%–95%

LED indicator

Green LED indicator showing the GSM signal

Blue LED indicator showing the GPS signal

Button/Switch

1 upgrade button (used to manually upgrade the firmware)

1 power button

MEITRACK T399 Bluetooth Vehicle Tracker User Guide

Memory

8 MB flash

Sensor

3-axis accelerometer (used to wake the device up by vibration and detect towing alerts,

harsh acceleration alerts, and harsh braking alerts)

Frequency band

T399G-GFB5:

UMTS:B1/B2/B5/B8

GSM:B2/B3/B5/B8

T399L-AFB5:

LTE FDD:B2/B4/B12

WCDMA:B2/B4/B5

T399L-JFB5:

LTE FDD:B1/B3/ B8/B18/ B19/B26

T399L-GFB5:

LTE FDD:B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/B19/B20/B25/B26/B28

LTE TDD:B38/B39/B40/B41

WCDMA:B1/B2/B4/B5/B6/B8/B19

GSM:850/900/1800/1900MHz

T399L-EFB5:

LTE FDD:B1/B3/B7/B8/B20/B28A

WCDMA:B1/B8

GSM:B3/B8

T399L-AUFB5:

LTE FDD:B1/B2/B3/B4/B5/B7/B8/B28

LTE TDD:B40

WCDMA:B1/B2/B5/B8

GSM:B2/B3/B5/B8

GNSS

GPS/GLONASS/BeiDou/Galileo

Positioning sensitivity

-167 dB

Positioning accuracy

2.5 meters

Bluetooth

Support Bluetooth 4.2 and Bluetooth 5.0

GPS/GSM antenna

Built-in antenna

I/O port

At most 5 digital inputs can be set (switched to the positive trigger or negative trigger).

IN3 and IN4: switched to the analog input (0–30 V). IN5: 1-Wire port by default;

configured as output 2 or the negative trigger.

Output 1

1 USB port(CAN version requires USB cable(

USB to serial

).Other versions

are standard Android USB cables)

1 output (5 V)

1 RS232 serial port (RS232 version): Ground wire/Tx cable/Rx cable

1 CAN bus interface (CAN version):FMS protocol

3.2.1 Interface Definition

The I/O port cable of the device is an 8-pin cable, including the power port, analog input port, positive trigger input

MEITRACK T399 Bluetooth Vehicle Tracker User Guide

port, negative trigger input port, and output port.

Power

(+)

GND

(-)

Input 1

(-)

Input 2

(+)

Input 3

(+)

Input 4

(+)

Output 1

1-wire

+ 5V

Pin Number

Cable Color

Description

1 (Power +)

Red

Positive charge of the power input. Connect to the positive charge of the

vehicle battery. Input voltage: 11.4–90 V. 12 V or 24 V is recommended.

2 (GND)

Black

Ground wire. Connect to the negative charge of the vehicle battery or to the

negative terminal.

3 (Input 1)

Grey

Digital input (negative trigger by default)

Connect to a vehicle door trigger signal cable to detect vehicle door status.

(Most vehicles made in China, South Korea and Japan are negative edge-

triggered.)

The port can be configured as the positive trigger.

4 (Input 2)

White

Digital input (positive trigger by default). The port can be configured as the

negative trigger.

Connect to the vehicle's ACC cable by default to detect the vehicle's ACC

status.

5 (Input 3)

Blue

Digital input 3 (positive trigger by default). The port can be configured as the

negative trigger or analog input 2 (0–30 V).

6 (Input 4)

Yellow

Digital input 4 (positive trigger by default). The port can be configured as the

negative trigger or analog input 1 (0–30 V).

7 (Output 1)

Green

Valid: low level (0 V)

Invalid: open collector

Maximum voltage for the open collector output (invalid): 60 V

Maximum current for the low level output (valid): 500 mA

Set the PWM output (adjustable output time and pulse width).

Connect to an external relay to remotely cut off the vehicle fuel cable or

engine power supply.

8 (1-Wire port)

Pink

Connect to the iButton reader and other devices supporting the 1-Wire

MEITRACK T399 Bluetooth Vehicle Tracker User Guide

protocol. The port can be configured as negative input 5 or open collector

output 2.

9 (5 V output

cable)

Yellow & red

5 V DC output

It can be connected to the power supply of a temperature sensor.

Ground wire

RS232-Tx or CAN-H

RS232-Rx or CAN-L

Pin Number

Cable Color

Description

10 (GND)

Yellow &

brown

Ground wire

11 (RS232-Tx or CAN-H)

Purple

Send data through the RS232 port or used to connect a CAN bus

peripheral..

12 (RS232-Rx or CAN-L)

Brown

Send data through the RS232 port or used to connect a CAN bus

peripheral...

4Main Device and Accessories

Standard accessories:

⚫T399 Bluetooth vehicle tracker (with a cable of 50 cm in length)

⚫L wrench

⚫Hexagon screw

⚫USB to serial cable (for CAN version)

⚫CD download card

Note:USB to serial will be standard accessory for T399L Can version,the USB of other version is normal Android USB an

dit is optional

Optional accessories:

Optional Accessory

Description

USB cable

Standard Android USB cable

Relay (12 V/24 V)

It is connected to output 1.

Buzzer

It is connected to output 1 or the 1-Wire port (pink cable), which needs

to be set to output 2. The buzzer is powered by an external 5 V power

supply.

A52 digital temperature sensor

It is connected to the 1-Wire port (pink cable).

iButton reader

It is connected to the 1-Wire port (pink cable).

A53 fuel level sensor (analog input

voltage)

It is connected to analog input 1 (blue cable).

High temperature resistant battery

(400 mAh)

Optional (-5°C to 75°C)

External GPS antenna

3 meters in length (two hardware versions available: internal or external

antenna)

Tabla de contenidos

Otros manuales de Accesorios para automóviles de MeiTrack

MeiTrack

MeiTrack T633L Manual de usuario

MeiTrack

MeiTrack MT90 Manual de usuario

MeiTrack

MeiTrack A89 Manual de usuario

MeiTrack

MeiTrack MT90 Manual de usuario

MeiTrack

MeiTrack TC68 Manual de usuario

MeiTrack

MeiTrack Mobileye T622 Manual de usuario

Manuales populares de Accesorios para automóviles de otras marcas

James Baroud

James Baroud Odyssey Manual de usuario

Motorola

Motorola i50sx Manual de usuario

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manual de usuario

Feniex

Feniex T3 Manual de usuario

Renault

Renault 77 11 423 180 Manual de usuario

Kia

Kia E8300-4D000 Manual de usuario

Brink

Brink 756843 Manual de usuario

Whispbar

Whispbar K085W Manual de usuario

v.link

v.link CI-VL2-PC-HSD Manual de usuario

Viking

Viking Stack-Rack Guía de configuración rápida

Aries

Aries 203015 Manual de usuario

Choetech

Choetech AT0005 Manual de usuario

ZZ2

ZZ2 ZZAIR-PRO Manual de usuario

Holman

Holman 4A80L Manual de usuario

Thule

Thule 2075 Manual de usuario

Motorola

Motorola T325 Manual de usuario

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guía de instalación

DV8

DV8 FBJL-02 Manual de usuario