MBM E-METRO Manual de usuario
E-METRÒ
USER MANUAL
E-METRÒ
E-METRÒ USER MANUAL
1. FOREWORD 3
1.1 General 3
1.2 Assistance 3
1.3 Graphic form of safety warnings 3
2. SAFETY WARNINGS 4
2.1 General safety rules 4
2.2 Responsibility 4
2.3 Warnings for users 5
2.4 Maintenance warnings 5
2.5 Other provisions 6
2.6 Unpacking and setup 6
2.6.1 Saddle adjustment
6
2.6.2 Pedal assembly
7
3. GENERAL DESCRIPTION 8
3.1 General description 8
3.2 Technical sheet 9
3.3 Brake levers 10
3.4 Speed change 10
3.5 Assistance system management 11
3.5.1 Commands
11
3.5.2 Assistance levels
11
3.6 Activation of assistance 11
3.7 Walk assistance mode 13
3.8 Battery 13
3.8.1 Battery installation / removal
13
3.8.2 State of charge
13
3.8.3 Battery charging
14
3.8.4 Troubleshooting
14
3.9 Front and rear light 15
4. TERMS OF USE AND ENVIRONMENT FORESEEN 16
4.1 Intended use 16
4.2 Environment of use 16
4.3 Improper uses and contraindications 17
5. LIFTING AND TRANSPORT 18
5.1 Lifting 18
INDEX
5.2 Transport 18
6. COMMISSIONING 19
6.1 Charging the battery 20
6.2 Preliminary functional checks 20
6.2.1 Control devices
20
6.2.2 Wheels
20
6.2.3 Braking system
20
6.2.4 Frame, handlebar and seat position
21
6.2.5 Brake adjustment
22
6.2.7 Lights operation
23
7. USE OF THE BICYCLE 24
7.1 Riding the bicycle 25
7.2 Braking 25
7.3 Parking the bicyc 25
8. MAINTENANCE 26
8.1 General 26
8.2 Daily maintenance and checks 26
8.2.1 Checking the labels and pictograms
26
8.2.2 Checking the wheels
26
8.2.3 Check brake operation
26
8.3 Maintenance and weekly checks 27
8.3.1 Washing and cleaning
27
8.3.2 Lubrication and chain tension control
27
8.3.3 Checking the frame and bolts
27
8.4 Maintenance and monthly checks 28
8.4.1 Checking the circuits and electrical compo-
28
9. TECHNICAL ASSISTANCE AND SPARE PARTS 29
10. WAREHOUSE DEPOSIT 29
11. DISPOSAL OF COMPONENTS AND MATERIALS 30
12.WARRANTY RULES 31
13. COMPLIANCE 32
E-METRÒ USER MANUAL
p.3
1. FOREWORD
1.1 GENERAL
This manual is an integral and essential part of the E-METRO pedal assisted bicycle.
Before starting it is essential that users read, understand and scrupulously follow the following instructions.
The manufacturer is not liable for damage caused to people and / or things or to pedal assisted bicycles, if they are used
incorrectly with respect to the prescriptions indicated. With a view to continuous technological development, the man-
ufacturer reserves the right to modify the components, including the frame without notice, without this manual being
automatically updated.
1.2 ASSISTANCE
For any inconvenience or request for clarification, contact the authorized dealer, who has competent and specialized per-
sonnel, as well as specific equipment and original spare parts.
1.3 GRAPHIC FORM OF SAFETY WARNINGS
To identify the safety messages in this manual, the following graphic warning symbols will be used. They have the func-
tion of attracting the attention of the reader / user for the purposes of a correct and safe use of the pedal assisted bicycle.
It highlights behavioral rules to keep in order
to avoid damage to the pedal assisted bicycle
and / or the onset of dangerous situations.
It highlights the presence of dangers that
cause residual risks to which the user must
pay attention in order to avoid injury or ma-
terial damage.
DANGER
ATTENTION
E-METRÒ USER MANUAL
p.4
2. SAFETY WARNINGS
2.1 GENERAL SAFETY RULES
Even if you are already familiar with the use of pedal assisted bicycles, you must follow the instructions given here, in ad-
dition to the general precautions to be observed while driving a motor vehicle. In particular:
• Acquire full knowledge of the pedal assisted bicycle.
• Read the manual carefully to learn about the operation, the safety devices and all the precautions necessary for the safe
use of the vehicle. All this to allow safe use.
• Carefully keep the pedal assisted bicycle in perfect working order.
For any inconvenience or request for clarification, please contact the authorized dealer without hesitation, who has com-
petent and specialized personnel, specific equipment and original spare parts.
2.2 RESPOSABILITY
Failure to comply with the operating instructions and safety prescriptions contained in this manual exempts the man-
ufacturer from any liability.
If the maintenance of the pedal assisted bicycle is carried out in a way that does not comply with the instructions provid-
ed, with non-original spare parts or in any case in such a way as to compromise its integrity or modify its characteristics,
the manufacturer will be relieved of any responsibility relating to the safety of persons. and malfunction of the pedal as-
sisted bicycle.
ATTENTION
ATTENTION
USE OF THE ASSISTED BICYCLE
Each user must first have read the instruction manual, in particular the chapter on safety information.
RISKS RELATED TO THE USE OF THE ASSISTED BICYCLE
• Despite the application of safety devices, for safe use of the pedal assisted bicycle, you must take note of all the provisions
relating to the prevention of accidents contained in this manual.
• Always remain focused while driving and DO NOT underestimate the residual risks associated with the use of pedal assist-
ed bicycles.
E-METRÒ USER MANUAL
p.5
For any data not included or not deductible from this manual, it is recommended to consult the authorized reseller directly.
2.3 WARNINGS FOR USERS
1. It is forbidden to carry a passenger.
2. Can only be used by experienced adults and children.
3. Do not take alcohol or drugs before riding the pedal assisted bicycle.
4. These pedals assisted bicycle models are designed and built to be used outdoors, on roads and private and public en-
vironments.
5. Do not ask the pedal assisted bicycle to perform better than that for which it was designed.
6. Never ride the pedal assisted bicycle with parts that have been disassembled.
7. Avoid uneven surfaces and obstacles.
8. Drive with both hands on the handlebar.
9. Replace worn and / or damaged parts, check that the protections work correctly before use.
2.4 MAINTENANCE WARNING
1. All maintenance operations must be carried out with the battery disconnected.
2. During each maintenance phase, operators must be equipped with the necessary accident prevention equipment.
3. The tools used for maintenance must be suitable and of good quality.
4. Do not use gasoline or flammable solvents as cleaning agents, but always use non-flammable and non-toxic solvents.
5. Limit the use of compressed air for cleaning as much as possible (max 2 bar) and protect yourself with goggles with
side shields.
6. Never resort to the use of open flames as a means of lighting when carrying out inspection or maintenance operations.
7. After any maintenance or adjustment, make sure that no tools or foreign bodies are left between the movement parts
of the pedal-assisted bicycle.
ATTENTION
ATTENTION
UNAUTHORIZED MODIFICATIONS
If you hear unusual noises, or feel something strange, stop the pedal-assisted bicycle immediately. Then carry out a check
and, if necessary, contact the authorized dealer.
ORIGINAL REPLACEMENTS
Use only original spare parts supplied by M.B.M. S.r.l.
Any liability of the Manufacturer for damage or loss of functionality caused
following the use of non-original accessories and parts is excluded.
E-METRÒ USER MANUAL
p.6
2.5 OTHER PROVISIONS
The first thing to do when starting use is to check the presence and integrity of the protections and the operation of the
safety devices. If you find any defects, do not use the pedal assisted bicycle!
2.6 UNPACKING AND SETUP
The pedal assisted bicycle is delivered fully assembled and in working condition.
2.6.1 SADDLE AND ADJUSTMENTS
Adjusting the height of the saddle is an essential prerogative for the correct use of the pedal assisted bicycle. Incorrect
adjustment can generate structural breaks in the frame.
Adjust the height of the saddle by activating the quick release mechanism (Ref. A - Figure 1). Check that the mechanism is
tightened before testing the seat and using the vehicle. Do not raise the saddle beyond the limit switch signal located in
the seat post (Ref. B - Figure 1).
SHELTERS
It is therefore strictly forbidden to modify or remove the guards,
controls, labels and information plates.
DANGER
DANGER
IMPORTANT WARNING:
For your safety, the seat post reference
mark (B) should never be outside the
tube where the seat post is inserted.
ATTENTION
ASSEMBLY
In the event that you do not have the ap-
propriate instrumentation for adjustment
or do not have the skills, contact the au-
thorized reseller.
FIG. 1
E-METRÒ USER MANUAL
p.7
ATTENTION
ASSEMBLY
In the event that you do not have the appropriate
tools for adjustment
or do not have the skills, contact the authorized
dealer.
2.6.2 PEDALS ASSEMBLY
Right Pedal: it is identified by the letter R marked on its pin.
To assemble the pedal, screw it by turning the pin clockwise.
(Figure 4)
Left Pedal: it is identified by the letter L marked on its pin.
To assemble the pedal, screw it by turning the pin counter-
clockwise. (Figure 4)
FIG. 4
E-METRÒ USER MANUAL
p.8
3. GENERAL DESCRIPTION OF THE BICYCLE
3.1 GENERAL DESCRIPTION
The pedal assisted bicycle is designed and built to be used outdoors, on roads and private or public environments. In par-
ticular, the components and the type of pedal assisted bicycle allow you to tackle routes with asphalted surfaces or with
similar characteristics without particular roughness.
The pedal assisted bicycle is equipped with a rechargeable battery and an electric motor, whose intervention takes place
only in conjunction with the pedaling and progressively stops as the vehicle speed approaches 25 km / h, and then comes
to a complete stop. at that speed.
To manage the assistance system there is a special control located next to the left grip on the handlebar.
On the right side of the handlebar there is a control system for adjusting the gears.
INCORRECT AND UNINTENDED USE
The bicycle was designed and built for the specified use; a different use and
non-compliance with the technical parameters set by the manufacturer may con-
stitute a dangerous condition for users.
DANGER
E-METRÒ USER MANUAL
p.9
3.2 Scheda tecnica
1. HANDLEBAR AND CONTROLS
2. ENGINE
3. SADDLE
4. BATTERY
5. PEDALS
6. FORK
7. LIGHT
CODE E341
FRAME ALLUMINIUM
FORK MBM HI-TEN STEEL
CRANKSET 46X170 ALLOY
REAR DERAILLEUR SHIMANO TY300
SHIFTER 7 SPEEDS
BRAKES V-BRAKE
WHEELS 20X2.00
SADDLE BASSANO
LIGHTS LIGHTS BATTERY
MOTOR REAR HUB
BATTERY TO THE RACK
SPEED 25 KM/H
DISPLAY LCD
POWER LEVELS 5 LEVELS
WEIGHT 21 KG
E-METRÒ USER MANUAL
p.10
3.3 BRAKE LEVERS
The brake levers (Ref. F - Figure 5) are located on the handlebar of the pedal assisted bicycle, near the knobs (Ref. G-Fig-
ure 5). These systems allow the braking system to be activated by controlling the movement of the pads until they come
into contact with the wheel rim. The pads, sliding on special guides obtained in the profile of the rim, generate the friction
necessary to stop the motion of the bicycle in proportion to the force applied to the lever. The right brake lever activates
the rear brake fixed to the frame while the left brake lever activates the front brake fixed to the fork.
3.4 SPEED CHANGE
The pedal assisted bicycle has a 7-speed gearbox, with the sprockets positioned on the rear wheel hub, selectable using
the opposing levers, located at the base of the right knob. The indicator (Ref. H - Figure 5) present in the upper part of the
handlebar allows you to view the selected ratio.
FIG. 5
Tabla de contenidos
Otros manuales de Bicicleta de MBM
MBM
MBM FUNK CROSS 20 Manual de usuario
MBM
MBM CHAOS 26 Manual de usuario
MBM
MBM PRIMAVERA 28 Manual de usuario
MBM
MBM FUNK URBAN 20 Manual de usuario
MBM
MBM KAIROS PLUS Manual de usuario
MBM
MBM KAIROS 29 Manual de usuario
MBM
MBM RAMBLA SPORT LADY Manual de usuario
MBM
MBM SINOPE 28 Manual de usuario
MBM
MBM EREBUS 28 Manual de usuario
MBM
MBM KERES PLUS Manual de usuario
