MB Connect Line MbNET.mini Series Guía de solución de problemas

Quick start-up guide EN

from rmware V 2.0.6 and HW 02 (Nov. 26th, 2019)

PROG. CNTLR.

E482663

8.002.702.02.00

MDH860, MDH861, MDH862 EU, MDH 862 AT&T,

MDH863, MDH 865, MDH 866 EU, MDH 866 AT&T, MDH 867

Table of contents

Safety instructions 3

Using Open Source Software 4

General Information 4

Special Liability Regulations 5

Used Open-Source Software 5

Included in delivery 6

Performance characteristics 8

Getting started 8

Initial conguration 9

Initial conguration via mbCONNECT24 V 1.7 10

Adding a new device 10

Transfer conguration to the mbNET.mini 12

Initial conguration via RSP mbCONNECT24 V 2.x 13

Creating a project 13

Create a device 14

Create the conguration 15

Transferring the conguration to the mbNET.mini 16

Transfer conguration to the mbNET.mini 17

Access the web interface of the mbNET.mini 18

Device State 19

Diagnostics 19

Tags 20

Loading the factory settings 21

Factory settings on delivery 22

Technical Data 22

This Quick Start Guide provides a quick Overview of selected operating procedures and

functions of the mbNET.mini industrial router. However, the detailed manual with the important

Notes and safety instructions can NOT be replaced by this document.

Read the following instructions carefully and keep this document in a safe. Latest information,

updates and the complete Manual, visit our website at www.mbconnectline.com.

NOTE: electrostatic discharge!

Observe the necessary safety

precautions when handling com-

ponents that are vulnerable

to electrostatic discharge (EN 61340-5-1 and

IEC 61340-5-1)!

The mbNET routers are maintenance-free

units.

If a mbNET router have damage or malfuncti-

on, the device must be immediately taken

out of service and secured against inadver-

tent operation.

The complete manual of the router as well

as the conformity declaration can be found

in the download area on our website

www.mbconnectline.com

• Only qualied specialist personnel may install,

start up, and operate the router. The national

safety and accident prevention regulations

must be observed.

• The router is built to the latest technological

standards and recognized safety standards

(see Declaration of Conformity).

• The router is only intended for operation in the

control cabinet and with SELV according to

IEC 60950/EN 60950/VDE 0805.

• The router may only be connected to devices,

which meet the requirements of EN 60950.

• The router is for indoor use only.

• Never open the router chassis. Unauthorized

opening and improper repair can pose a dan-

ger to the user. Unauthorized modications

are not covered by the manufacturer’s war-

ranty.

Opening up the device voids the warranty!

Safety instructions

Using Open Source Software

General Information

Our products contain, amongst others, so-called open-source software that is provided by third

parties and has been published for free public use. The open-source software is subject to special

open-source software licenses and the copyright of third parties. Basically, each customer can use

the open-source soft-ware freely in compliance with the licensing terms of the respective producers.

The rights of the customer to use the open-source software beyond the purpose of our products are

regulated in detail by the respective concerned open-source software licenses. The customer use

the open-source software freely, as provided in the respective e󰀨ective license, beyond the pur-

pose that the open-source software gets in our products. In case there is a contradiction between

the licensing terms for one of our products and the respective open-source software license, the

respective relevant open-source software license takes priority over our licensing terms, as far as

the respective open-source software is concerned by this.

The use of the used open-source software is possible free of charge. We do not demand usage

fees or any comparable fees for the use of the open-source software contained in our products.

The use of the open-source software in our products by the customer is not part of the earnings we

achieve with the contractual compensation.

All open-source software programs contained in our products can be taken from the available list.

The most important open-source software licenses are listed in the Licenses section at the end of

this publication.

As far as programs contained in our products are subject to the GNU General Public License

(GPL), GNU Lesser General Public License (LGPL), the Berkeley Software Distribution (BSD),

the Massachusetts Institute of Technology (MIT) or another open-source software license, which

regulates that the source code must be made available, and if this software is not already delivered

in source code on a data carrier with our product, we will send you this at any time upon request.

If it is required to send this on a data carrier, the sending will be made against pay-ment of a cost

compensation of € 35,00. Our o󰀨er to send the source code upon request ceases automatically

three years after delivery of our product to the customer.

Requests must be directed to the following address, if possible under specication of the serial

number:

MB CONNECT LINE GMBH Tel. +49 (0) 98 51 / 58 25 29 0

Fernwartungssysteme Fax +49 (0) 98 51 / 58 25 29 99

Winnettener Str. 6 [email protected]

91550 Dinkelsbühl

GERMANY

Special Liability Regulations

We do not assume any warranty or liability, if the open-source software programs contained in our

product are used by the customer in a manner that does not com-ply any more with the purpose

of the contract, which is the basis of the acquisition of our product. This concerns in particular any

use of the open-source software programs outside of our product. The warranty and liability regula-

tions that are pro-vided by the respective e󰀨ective open-source software license for the respective

open-source software as listed in the following are e󰀨ective for the use of the open-source software

beyond the purpose of the contract. In particular, we are not liable, if the open-source software

in our product or the complete software congu-ration in our product is changed. The warranty

granted with the contract, which is the basis of the acquisition of our product, is only e󰀨ective for

the unchanged open-source software and the unchanged software conguration in our product.

Used Open-Source Software

For a list of the open-source software used in this product see

https://www.mbconnectline.com/downloads/open-source-software-licenses.txt

Included in delivery

Should any of these parts are

missing or damaged, please

contact the following address:

MB connect line GmbH

Winnettener Str. 6

91550 Dinkelsbühl

GERMANY

Tel.: +49 (0)9851/582529-0

Fax: +49 (0)9851/582529-99

www.mbconnectline.com

Please check that your delivery is complete:

Please keep the original box and the original packaging in case

you need to send the device for repair at a later date.

MDH 860 MDH 861 MDH 862 (EU/AT&T)

Item No.: 8.002.702.02.00

Quick start guide

Item No.: 8.002.101.00.00

GSM

antenna WiFi antenna

Item No.: 8.002.108.00.00

MDH 863 MDH 865 MDH 866 (EU/AT&T) MDH 867

Performance characteristics

Getting started

● The router can be fully congured via the portal (my)mbCONNECT24.

● Can connect to machines and systems via LAN, WAN, WiFi or modem.

● Deployable worldwide using mobile communications plus access via LAN and Internet.

● Secure connection using an integrated rewall with IP lter, NAT, port forwarding and VPN

with Blowsh encryption.

● Two digital inputs to initiate the connection to the portal server or send a warning text mes-

sage/email.

Depending on the device, connect an antenna, and insert a SIM card.

Before connecting the device to a network or PC, rst ensure that it is properly connected to a

power supply, otherwise it may cause damage to other equipment.

Connect equipotential bonding to the functional earth (FE).

Connect the mbNET.mini to a power supply (DC 10 – 30 V).

Make sure the polarity is correct!

After turning on the power supply, the LED Pwr lights up.

As soon as the system has been checked and

started (duration approx. 25 sec), the Rdy LED

ashes for the duration of the starting up pro-

cess (approx. 90 sec).

The mbNET.mini is now ready for operation.

T 0 T + 25 Sek. T + 90 Sek.

Pwr

Rdy

Con

Usr

Pwr

Rdy

Con

Usr

Pwr

Rdy

Con

Usr

Initial conguration

Requirements:

● You have a user account on the web portal mbCONNECT24 V 1.7.x

or the Remote Service Portal RSP mbCONNECT24 V 2.x

If you do not have a user account on mbCONNECT24, please contact your system administra-

tor or authorized sales partner.

For more information about mbCONNECT24 see www.mbconnectline.com in our Download

Portal.

● Windows PC with remote client software mbDIALUP * installed .

With mbDIALUP you establish a secure VPN connection to mbCONNECT24.

* The latest version can be downloaded on www.mbconnectline.com

Generally following procedure applies:

● Add the mbNET.mini in the portal mbCONNECT24 as a new device.

● Enter the necessary basic data, so that the device can connect to the portal (for example,

device name, network settings, connection information, etc.).

● Transfer the device conguration from the portal into the mbNET.mini.

● After the mbNET.mini has been connected to the portal, it can be congured completely

there.

More information about conguring devices, see the mbNET.mini Manual (download under

www.mbconnectline.com) or in the mbCONNECT24 online help.

Initial conguration via mbCONNECT24 V 1.7

Adding a new device

VPN VPN

mbDIALUP

For the initial conguration following information / settings are necessary:

• Description: Device Name and Type

• Network: LAN IP and LAN Netmask bzw. WiFi settings

• Internet: WiFi WAN Settings

ADVICE!

Change unconditionally and without delay the default login information!

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Enrutador de red de MB Connect Line

MB Connect Line

MB Connect Line mbNET Series Guía de solución de problemas

MB Connect Line

MB Connect Line mbNET MDH859 Guía de solución de problemas

MB Connect Line

MB Connect Line mbNET.rokey Series Guía de solución de problemas

MB Connect Line

MB Connect Line mbNET.mini Manual de usuario

MB Connect Line

MB Connect Line mbNET Series Manual de usuario

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

Billion

Billion BIPAC 5102 Series Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

Cisco

Cisco NCS 540 Manual

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

Cisco

Cisco ASR 1000 Series Manual del operador

EnGenius

EnGenius ESR-9710 Manual de usuario

Cisco

Cisco 805 Series Instrucciones de funcionamiento y seguridad

MB Connect Line mbNET.mini Series Guía de solución de problemas

Manuales populares de Enrutador de red de otras marcas