Maycom MP-50 Manual de usuario
maycom MP-50
User's Guide
3
Information to user : PART 15, PARAGRAPH 15.21 AND
15.105(b)
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment
FCC Notice
NOTE : This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver
-Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
4
About your maycom MP-50 Player .............................................................4
Unpacking your maycom MP-50 Player .....................................................5
At a glance...................................................................................................6
Specifications..............................................................................................7
Installing Batteries.......................................................................................8
Exchanging Covers......................................................................................9
Installing the USB driver in Windows ......................................................10
Copying files to the MP-50 Player in Windows........................................17
Macintosh Operation.................................................................................19
Operating the MP-50 Player......................................................................21
Keylock.....................................................................................................22
The Menu Key...........................................................................................22
The Menu / Menu Tree / Equalizer ...........................................................23
Play Modes................................................................................................24
Using the MMC Expansion Slot...............................................................25
Inserting a MultiMediaCard......................................................................25
Selecting the source for playback..............................................................26
Removing a MultiMediaCard....................................................................27
Installing Music Match Jukebox (Windows) ............................................28
Encoding MP3 files from Audio CDs (Windows) ....................................32
Static discharge..........................................................................................33
Storing & Handling...................................................................................34
Troubleshooting.........................................................................................34
Contents
5
The maycom MP-50Player is the most convenientand easy-to-use
way to enjoy music whereever you are.
In order to make the most of your MP-50 Player read this user´s
guide thoroughly.
About your maycom MP-50 Player
6
The following components are in the MP-50Player box:
MP-50 MP3 Player Additional Cover Stereo Headphones
‚
Owner´s Manual CD-Rom USB Cable
Carrying case(Optional) Clip (Optional)
Note: All pictures are symbol pictures only. The actual look of items may vary.
Unpacking your MP-50 Player
7
Front view Back view
No Description Key pressed for approx. 2 seconds
1 MMC (MultiMediaCard) Door -
2 Display artist & title (ID3 tags) Activate/Deactivate Keylock
3 Headphones Jack -
4 Previous Track Rewind within track
5 Stop Power On/Off
6 USB Jack -
7 A-B Repeat Format (erase) internal memory
8 Menu Key / Volume up/down -
9 Next Track Fast Forward within track
10 Display Window -
11 Play/Pause Select internal memory/MMC
12 Battery Cover -
At a glance
8
MP-50 Player
•Maximum audio output power: 2x15mW
•Signal to noise ratio: >90dB
•Frequency response: 20 Hz –20 KHz
•Maximum total harmonic distortion: 0.3%
•Headphone impedance: 16 ohm
•Power consumption at 128 kbps MP3 decoding at volume
level 15, no EQ: approx. 90mA
•Playing time with new set of batteries: approx. 8-10 hours
•Dimensions (mm): W86 x D55 x H32
•Weight without batteries: 52g
•Power Supply: min. 2.4 VDC (2 pcs AAA Batteries or
rechargeable batteries-not included)
•Internal memory: 64 MB
•Maximum supported MP3 bitrate: 256 kbps
•Supported ID3 Tags: v2.2/v2.3
Minimum system requirements Windows
•Operating system: Windows 98 SE or better
•CPU: Pentium166MHz or faster
•RAM:32 MB or more
•CD-ROM drive
•USB interface
Minimum system requirements Macintosh
•Operating systems:-Mac OS 8.6 or better
-Mac OS X 10.1 or better
•CPU: Mac 604 Processor 120MHz or faster
•RAM:32 MB or more
•CD-ROM drive
•USB interface
Specifications
9
Install 2 AAA batteries* into your MP-50. You may use alkaline
batteries or NiMh rechargable batteries (NOT NiCd).
1) To release battery cover
press down where indicated. 2) Open the cover.
3) Insert batteries according
to polarity diagram. 4) Replace the battery
cover.
A new set of alkaline batteries provides an MP3 play time of
approximately 8-10 hours.
*not included
Installing Batteries
10
1) Open the MMC door. At
the marking indicated in the
above picture, gently lift the
cover towards you until you
hear a click.
2) Loosen the cover below
the menu key and below the
headphone jack.
3) The cover can now be
removed. 4) To replace the cover
simply snap it into place
over the front of the MP-50
Player.
Never use force to remove the cover. Damaged covers are not
covered by the warranty.
Exchanging Covers
11
1) Turn on your PC and the MP-50 Player.
2) Insert the MP-50 CD-Rom into your CD-Rom drive.
3) Connect the USB cable to your MP-50 Player where
indicated:
Carefully open the USB
door. Plug in the smaller end of
the USB cable.
4) Connect the larger end of the USB cable to your PC USB
port.
5) Your PC will automatically detect MP-50. Depending on
your version of Windows please turn to the appropriate page:
Windows 98...................................................................................12
Windows 2000..............................................................................14
Windows ME................................................................................16
Windows XP .................................................................................16
Installing the USB driver in Windows
Tabla de contenidos
Otros manuales de Reproductor de MP3 de Maycom
