Maxxhaul 50220 Manual de usuario
Read and understand this entire manual before setting-up, in-
stalling, operating, or servicing this product.
SAVE THIS MANUAL
Instruction Manual
&
Parts List
52” Aluminum Roof
Top Coss Bar
Set - Pair
Model 50220
Copyrightc2019 by Maxx Group, LLC.. All rights reserved. No portion of this manual or any artwork contained
herein may be reproduced in any shape or form without the express written consent of Maxx Group, LLC.
Due to continuing improvements, actual product may di
ffer slightly from the product described herein. Tools
required for assembly and maintenance may not be included.
09202
Aluminum Crossbars X2
Keys X2
Hex key driver X1
NOTE:
Please read instructions carefully before installation.
Please keep the instruction in your vehicle after the installation is complete.
WARNING:
Use ONLY on existing vehicle raised side rails.
Do NOT exceed loading capacity of 60 kg / 130 lb
Do NOT use the product if it is found to be damaged, cracked or not in good condition.
Do NOT drive over 100 km / 60 miles per hour with load attached.
Check crossbars and load every 40 km or 25 miles.
Avoid heavy braking, accelerating and cornering when carrying load with crossbars installed.
Load on crossbars should be evenly distributed over both bars. Load should be centered onto
the crossbars.
MUST use rope or straps to secure the load on crossbars.
Do NOT carry cargo wider than the vehicle roof.
Remove crossbars when not in use or go through car wash.
Contents Checklist
Mounting Instructions
Step 1: Place the cross bars on the existing side rails on the vehicle.
Make sure the bars protrude equally on both sides.
Model 50220 Page 2
MINIMUM(70cm / 27”)
Step 2: Turn the key to unlock the mounting clamps. As the key is turned, the red guard opens,
allowing hex key to be used.
Turn the hex key un-clockwise to loosen the clamps for attaching to existing side rails.
Step 3: When the mounting clamps are attached to the existing vehicle side rails, tighten the
clamps using the hex key and turning clockwise.
There should be minimum 70cm / 27” distance between 2 cars when securely installed.
Note: Incorrect attachment can lead to unstable load and loss of property and danger to lives.
Step 4: When both crossbars are properly attached, use the key to lock and secure in place.
The red guard will close and prevent the use of the hex key.
Step 5: Load on crossbars should be evenly distributed over both bars. Load should be
centered onto the crossbars.
Do NOT exceed loading capacity of 60 kg / 130 lb
Model 50220 Page 3
2
3
1
14
10
11
12
7
8
17
9
15
6
13
5
16
Part Number Description Qty
1 Pipe plug 2
2 Molding 1
3 Aluminum Tube 1
5 Hexagon bar wrench 1
6 Key 2
7 Weldment 2
8 Left Shell 2
9 Right Shell 2
10 Live splint 2
11 Block 2
12 Block 2
13 Screw 2
14 Nut 2
15 Lock Core 2
16 Lock Block 2
17 Rivet 4
Model 50220 Page 4
Tabla de contenidos
Otros manuales de Accesorios para automóviles de Maxxhaul
Maxxhaul
Maxxhaul 70440 Manual de usuario
Maxxhaul
Maxxhaul 70108 Manual de instrucciones
Maxxhaul
Maxxhaul 70229 Manual de usuario
Maxxhaul
Maxxhaul 50616 Manual de usuario
Maxxhaul
Maxxhaul 70210 Manual de instrucciones
Maxxhaul
Maxxhaul 50027 Manual de usuario
Maxxhaul
Maxxhaul 70468 Manual de usuario
Maxxhaul
Maxxhaul 50613 Manual de usuario
Maxxhaul
Maxxhaul 80401 Manual de usuario
Maxxhaul
Maxxhaul 70209 Manual de usuario
