MAXTEK 79004 Manual de usuario
USER GUIDE
After Sales Support
UK/N.IRELAND HELPLINE NO:
REP.IRELAND HELPLINE NO:
WEBSITE:
EMAIL:
01270 508538
1800 995 036
www.quesh.co.uk
HD Camera Bike Light
MODEL NUMBER: 79004
After Sales Support
UK/N.IRELAND HELPLINE NO:
REP.IRELAND HELPLINE NO:
WEBSITE:
EMAIL:
01270 508538
1800 995 036
www.quesh.co.uk
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
Welcome Section
General Information & Safety Instructions
Contents & Features
Layout & Controls
Charging
Mounting The Camera
• Standard Seat Pole Fitting
• Aeroseat Pole Fitting
Turning On/Off
• Turning The Camera On
• Turning The Camera Off
• Beep Alerts
• LED Flashing
• LED Chasing
Micro SD Card
• Installing The Card
• Removing The Cars
• Repairing The Cars
Recordings
• Access Video Files
• Playback
Setting Date/Time
• Setting The Date And Time
Rear Light
• Light Modes
• Dim Modes
Reset
• Resetting The Camera
Specications
Contents
Welcome Section
Congratulations!
You have made an excellent choice with the purchase of this quality
MAXTEK® product.
By doing so you now have the assurance and peace of mind which
comes from purchasing a product that has been manufactured to
the highest standards of performance and safety, supported by the
high quality standards of Quesh Ltd.
We want you to be completely satised with your purchase so this
MAXTEK® product is backed by a comprehensive manufacturer’s
3 year warranty and outstanding after sales service through our
dedicated helpline.
We hope you enjoy using this product for many years to come.
If you require technical support or in the unlikely event that your
purchase is faulty, please telephone our helpline for immediate
assistance. Faulty product claims made within the 3 year warranty
period will be repaired or replaced free of charge provided that you
have a satisfactory proof of purchase (keep your receipt safe).
This does not affect your statutory rights. However be aware that the
warranty will become null and void if the product is found to have
been deliberately damaged, misused and/or disassembled.
1
After Sales Support
UK/N.IRELAND HELPLINE NO:
REP.IRELAND HELPLINE NO:
WEBSITE:
EMAIL:
01270 508538
1800 995 036
www.quesh.co.uk
After Sales Support
UK/N.IRELAND HELPLINE NO:
REP.IRELAND HELPLINE NO:
WEBSITE:
EMAIL:
01270 508538
1800 995 036
www.quesh.co.uk
2
General Information &
Safety Instructions
This device is powered by a 2600mAh lithium battery.
Do not dispose of batteries in your household waste.
Please contact your local authority for details on safe disposal.
• Never throw batteries into a re or expose to excessive heat sources.
• If batteries are swallowed, please seek immediate medical attention.
• Always ensure correct +/- battery polarity when installing batteries.
• Do not recharge non-rechargeable batteries.
Equipment, which is marked with the WEEE logo
(as shown on the left), should not be thrown away with your household waste.
Contact your local authority waste disposal department, as they will be able to
provide details of the recycling options available in your area.
Electrical and electronic equipment (WEEE) contains materials, parts and
substances, which can be dangerous to the environment and harmful to
human health if the waste of electrical and electronic equipment (WEEE) is not
disposed of correctly.
Equipment, which is marked with the WEEE logo
(as shown on the left), should not be thrown away with your household waste.
Contact your local authority waste disposal department, as they will be able to
provide details of the recycling options available in your area.
Battery Care
To get the best out of the battery, fully charge and use until at for the rst 5-6
times. Then use until at and fully charge at least once a month.
Prolonged storage without charge may cause damage to the battery and result in
poor to no charge. It is recommended you fully charge the battery every 6 months
for long term storage to keep the battery in good condition.
The full text of the EU declaration of conformity is available at:
www.quesh.co.uk
3
After Sales Support
UK/N.IRELAND HELPLINE NO:
REP.IRELAND HELPLINE NO:
WEBSITE:
EMAIL:
01270 508538
1800 995 036
www.quesh.co.uk
Contents & Features
Contents
1 x HD Camera bike light
1 x 8GB Micro SD card (Class 10)
1 x Charge cable
2 x Velcro straps
1 x Aeroseat adaptor
1 x wedge
Features
• Auto recording
• 100° Wide angle lens
• 2 Strobe with variable brightness
• Constant light with variable brightness
• Up to 6 Hours active use
• 4.5 Hours charge Time
• Micro USB port
After Sales Support
UK/N.IRELAND HELPLINE NO:
REP.IRELAND HELPLINE NO:
WEBSITE:
EMAIL:
01270 508538
1800 995 036
www.quesh.co.uk
4
Layout & Controls
Camera
Charge LED/
LED
Dimmer
Micro SD
Card Port
Micro USB
Port
Rubber
Dust Cover
On/Off
/Mode
Mounting
Loop
Speaker/
Microphone
Mounting
Wedge
Reset
5
After Sales Support
UK/N.IRELAND HELPLINE NO:
REP.IRELAND HELPLINE NO:
WEBSITE:
EMAIL:
01270 508538
1800 995 036
www.quesh.co.uk
Before using the camera please make sure it is fully charged.
Connect the supplied charge cable to the micro USB port and a
suitable power supply between 3.7V/500mAh and 5V/1A maximum.
A PC or Laptop USB port is preferable.
When the camera is charging a red LED will light up and then go
out once fully charged. This will take approximately 4.5 hours.
Power levels are determined via beeps when the camera is turned
on (see page 7).
Always check the output of the USB mains adaptor
before charging this device.
Charging
After Sales Support
UK/N.IRELAND HELPLINE NO:
REP.IRELAND HELPLINE NO:
WEBSITE:
EMAIL:
01270 508538
1800 995 036
www.quesh.co.uk
6
Standard Seat Pole Fitting
To mount the camera to a standard seat pole, thread the velcro
strap through the mounting loop. Place the camera in to the
preferred position on the seat pole, thread the strap through the
loop and secure rmly with the velco. If the camera angle is not
level then try using the other wedge either on it’s own or in
conjunction with the tted wedge.
Mounting The Camera
Aeroseat Pole Fitting
To mount the camera to an aeroseat pole, thread the velcro strap
through the mounting loop. Place the aeroseat adaptor to the
preferred position on the seat pole, place the camera against the
aeroseat adaptor. Thread the strap through the loop and secure
rmly with the velco. If the camera angle is not level then try using
the other wedge either on it’s own or in conjunction with the tted
wedge.
Standard Seat Pole Aero Seat Pole
Aeroseat Adaptor
Wedge
Wedge
Turning The Camera On
Press and hold the button for 3 seconds until you hear a beep(s).
This will turn the camera on and start it recording as well as the
light depending on the last setting used. The beeps heard will
indicate the current power level of the battery.
Turning On/Off
Beep indicator
4 Beeps
3 Beeps
2 Beeps
1 Beep
3 Long Beeps
Power Indicator
75% +
50% +
25% +
5% +
Under 5%
Please Note:
When the camera’s power reaches below 5% the camera function is disabled in
favour of the rear light. The light will last approximately 1.5 hours at this point.
Turning The Camera Off
Press and hold the button for 3 seconds until you hear a beep(s).
This will stop the recording and turn the camera and light off.
The beeps heard will indicate the power level left in the camera.
7
After Sales Support
UK/N.IRELAND HELPLINE NO:
REP.IRELAND HELPLINE NO:
WEBSITE:
EMAIL:
01270 508538
1800 995 036
www.quesh.co.uk
Beep Alerts
LED Flashing
If the LEDs round the lens are ashing the camera is not recording.
Make sure the micro SD card is inserted and/or turn on and off the
camera.
LED Chasing
If the LEDs are moving round the len the camera is recording.
After Sales Support
UK/N.IRELAND HELPLINE NO:
REP.IRELAND HELPLINE NO:
WEBSITE:
EMAIL:
01270 508538
1800 995 036
www.quesh.co.uk
8
Installing The Card
To install a micro SD card, lift up the dust cover to reveal the
micro USB port and the micro SD card slot. Insert the card contact
side rst with the contacts facing the light. Push the card down to
just below the edge of the port until it clicks and lock into position.
Removing The Card
To remove the micro SD card, press the card down into the slot
until it clicks and release. The card will spring up so you can
remove it.
Repairing The Card
If in the event the card becomes corrupts or doesnt play/record
please format the card directly with a PC/Laptop. This can be done
with the use of a Micro SD Adaptor (Not supplied).
Micro SD Card
When formatting the card, always format the card in FAT32.
Please Note:
For a more complete formatting of your micro SD card, please download
‘SDformatter’ from the following link:
https://www.sdcard.org/downloads/formatter_4
Tabla de contenidos
Manuales populares de Accesorios para bicicletas de otras marcas
Sigma
Sigma BC 16.16 Manual de usuario
Playcore
Playcore Dero Setbacks Manual de usuario
VDO Cyclecomputing
VDO Cyclecomputing x3dw Manual de usuario
Cateye
Cateye RAPID X2 Manual de usuario
buratti meccanica
buratti meccanica Clorofilla Trail Manual de usuario
Shimano
Shimano SG-8R20 Instrucciones de funcionamiento
