Matsusada Precision RMO Series Manual de usuario

Instruction Manual

MODEL RMOseries

19-inch Rack Mount Holder

B/N 174.9.020*174.9.020* Rev. 1.6

Note

◆

No part of this publication may be reproduced, stored in a retrieval system, or

transmitted, in any form, or by any means, mechanical, electronic, photocopying,

recording, or otherwise, without the prior written permission of Matsusada Precision.

◆

No patent liability is assumed with respect to the use of the information contained herein.

Moreover, because Matsusada Precision is constantly striving to improve its high-quality

products, the information contained in this manual is subject to change without notice.

Every precaution has been taken in the preparation of this manual. Nevertheless,

Matsusada Precision assumes no responsibility for errors or omissions.

Neither is any liability assumed for damages resulting from the use of the information

contained in this publication.

Trademarks

◆Company names and product names in this document are the trademarks or registered

trademarks of their respective companies.

Warranty

◆For details, refer to the following website.

https://www.matsusada.com/support/manufacturer_warranty.html

 
i
RMO series 
 Page 
1 Introduction ...........................................................................................................................................1 
1-1 Introduction...............................................................................................................................................1 
1-2 Overview...................................................................................................................................................1 
1-3 Features....................................................................................................................................................1 
1-4 Lineup.......................................................................................................................................................2 
2 Before Use............................................................................................................................................3 
2-1 Accessories..............................................................................................................................................3 
2-2 Initial Inspection........................................................................................................................................3 
2-3 Installation Condition................................................................................................................................3 
2-4 Handling Precautions...............................................................................................................................3 
3 External Appearance.............................................................................................................................4 
3-1 Example of Installation.............................................................................................................................4 
3-2 External Dimensions.................................................................................................................................7 
3-2-1 RMO-133H-RK/-RK2/-RK3 (RK-80/R4K-80 series)................................................................................7 
3-2-2 RMO-133H-RK/-RK2/-RK3 (R4K-36 series)...........................................................................................8 
3-2-3 RMO-133H-RK400 (RK series 400W/800W/1200W).............................................................................9 
3-2-4 RMO-133H-CO (CO series)..................................................................................................................10 
3-2-5 RMO-150H-B (ES series) .....................................................................................................................11 
3-2-6 RMO-133H-DRJ (DRJ series)...............................................................................................................12 
3-2-7 RMO-44H-HALF (REKJ series)............................................................................................................13 
3-2-8 RMJ-150H-EJC (EJC series)................................................................................................................14 
3-2-9 RMO-133H-EPR (EPR series)..............................................................................................................15 
3-2-10 RMO-177H-R4G (R4G series)............................................................................................................16 
4 Installation and Connection .................................................................................................................17 
4-1 Before Installation...................................................................................................................................17 
4-2 Mounting on Holder................................................................................................................................ 17 
4-2-1 RMO-133H-RK/-RK2/-RK3 (RK-80/R4K-80 series)..............................................................................17 
4-2-2 RMO-133H-RK/-RK2/-RK3 (R4K-36 series).........................................................................................18 
4-2-3 RMO-133H-CO (CO series)..................................................................................................................18 
4-2-4 RMO-133H-RK400 (RK series 400W/800W/1200W)...........................................................................19 
4-2-5 RMO-150H-B (ES series) .....................................................................................................................20 
4-2-6 RMO-133H-DRJ (DRJ series)...............................................................................................................20 
4-2-7 RMO-44H-HALF (REKJ series)............................................................................................................21 
4-3 Wiring RMO-133H-RK/RK2/RK3............................................................................................................22 
4-3-1 AC Wire Harness of RMO-133H-RK2/RK3...........................................................................................22 
4-3-2 Fan Cable of RMO-133H-RK2..............................................................................................................23 
4-3-3 Fan Cable of RMO-133H-RK3..............................................................................................................23 
4-3-4 Installing Fan Unit .................................................................................................................................25 
4-3-5 Installing Rack Mount Cover of RMO-133H-RK/RK2/RK3 ...................................................................25 
4-3-6 Wiring Fan Unit of RMO-133H-RK/RK2/RK3........................................................................................26 
 
 
Table of Contents 

Page 
5 Accessories.........................................................................................................................................27 
5-1 Blank Panel.............................................................................................................................................27 
5-2 Installing Blank Panel.............................................................................................................................27 
5-2-1 RMO-133H-RK/RK2/RK3 (RK-80/R4K-80/R4K-36 series )..................................................................28 
5-2-2 RMO-133H-RK400 (RK series: 400W/800W/1200W)..........................................................................28 
5-2-3 RMO-133H-CO (CO series)..................................................................................................................28 
5-2-4 RMO-150H-B (ES series) .....................................................................................................................29 
5-2-5 RMO-133H-DRJ (DRJ series)...............................................................................................................29 
5-2-6 RMO-177H-R4G (R4G series)..............................................................................................................30 
5-2-7 RMO-133H-EPR (EPR series)..............................................................................................................31 
5-2-8 RMO-150H-EJC (EJC series)...............................................................................................................31 
5-2-9 RMO-44H-HALF (REKJ series)............................................................................................................32 
 
 

1 Introduction

RMO series

1 Introduction

1-1 Introduction

Thank you for purchasing RMO series (19-inch rack mount holder).

Matsusada Precision takes every precaution to ensure the quality of our products. Please refer carefully

to this manual to use this product correctly and safely, and to achieve the best possible performance.

We have made every effort to provide all the necessary information in this manual. However, please do

not hesitate to contact us if you find any errors or omissions.

1-2 Overview

The RMO series is a rack mount adapter for our tabletop power supplies, electronic loads, and digital

controllers in a 19-inch rack.

The product is specially designed in accordance with Matsusada products to be installed, so it can be

easily used for installing them without measures against heat generation.

1-3 Features

•Specially designed for cooling so as not to affect the performance of the mounted devices. *1

•As for models employing built-in forced cooling fans, you have only to prepare a single cable to provide

power to drive the fan and the power supply.

•Perfect fit for the 19-inch rack cabinet lineup (RAC series). *2

*1 The intake temperature of the power supply unit should be within the operating temperature range. It

is generally known that more than 10C higher temperature than the operating temperature could cut

the service life in half.

*2 For details, contact our sales representatives.

1 Outline and Features

RMO series

1-4 Lineup

Model

Applicable power supplies

RMO-44H-HALF

REKJ/VOLJ

RMO-133H-RK*1 -RK2*1*2/-RK3*1*3*4

R4K-36/R4K-80/RK-80/EGS and CD (36Wor lower)

RMO-133H-RK400

RK/RZJR/EQ/TB and RKT (400W/800W)

RMO-133H-DRJ*5

DRJ/DRS/DJOP

RMO-133H-EPR

EG*7/ECD (48W or higher) /EPR

RMO-133H-CO

RMO-150H-B*6

RMO-150H-EJC

EJC

RMO-177H-R4G*1*6

R4G/R4GT

*1: Forced cooling fan attached. 115Vac (standard) / 230Vac (optional): 1 grounded cable 2.5 meters

supplied.

*2: Both the AC input cables of the main unit and the cooling fan can be put together as a whole one.

(Prepare AC wire harness separately.)

*3: Both the AC input cables of the main unit and the cooling fan together as a whole one. And the

[Power] switch ON/OFF on the power supply front panel can turn maximum 10 units ON/OFF at once.

(Prepare AC wire harness separately.)

*4: Some blank panels may be not used depending on number of power supply units to be installed.

*5: Note that DRJ series and DRS series with handles exceed 5.24 inches (133 mm) in height.

If you do not need the handle, select DRJ-LNh (option without handles).

*6: To increase the air flow, make space more than 10 cm. But, if it cannot be allocated, install a forced

cooling system.

*7 As EGD series can operate as a charge/discharge system combined with RK series

(400W/800W/1200W), they can be mixed and stored compactly in the holder.

2 Before Use

RMO series

2 Before Use

2-1 Accessories

After unpacking the box, check that the following accessories are supplied with the unit. If the

accessories are different, missing, or broken, please contact us immediately.

Model

Accessories

RMO-133H-RK400

RMO-133H-DRJ

RMO-133H-EPR

RMO-150H-B

RMO-150H-EJC

・Instruction Manual (this)

1 pc

RMO-44H-HALF

・Instruction Manual (this)

・Flat-head screw (M3 x 8)

・Display seal for input terminal

・Display seal for output terminal

1 pc

8 pcs

2 pcs

RMO-133H -RK

RMO-133H -RK2

RMO-133H -RK3

・Instruction Manual (this)

・AC cable for fan

1 pc

RME-133H-CO

・Instruction Manual (this)

・Pan-head screw for fan unit (M3 x 6)

1 pc

22 pcs

RME-177H-R4G

・Instruction Manual (this)

・AC cable for fan

1 pc

2-2 Initial Inspection

After unpacking the box, check the rack mount holder as well as the cover for scratches, dents, or other

damage on the unit caused by handling or transportation. If you find any abnormalities, please contact

the carrier and us.

2-3 Installation Condition

Install and use the unit in a horizontal orientation.

The intake temperature of the power supply unit should be within the operating

temperature range. It is generally known that more than 10C higher temperature

than the operating temperature could cut the service life in half.

Do not concentrate weight on the product when installing.

・DRJ series and DRS series with handles exceed 133 mm in height.

・RGJ series with handles exceed 149 mm in height.

2-4 Handling Precautions

Do not transport or install by a single person.

Do not attempt to install or remove by a single person.

When attaching the power supply unit to the rack mount, do not use longer screws

than 8 mm in length.

・Use the screws (M3 x 8) supplied for the plastic feet for installation.

・However, as for REKJ series, use the supplied pan-head screws (M3 x 8) for it.

3 External Appearance

RMO series

3-1 Example of Installation

RK-80/R4K-80/R4K-36 series

RK series (400W)

RK series (800W)

RK(800W): 2 units and Blank panel 140W: 1 piece (*Up to 3 units are available.)

(1)

(3)

(2)

RK series (1200W)

RK(1200W): 1 unit and Blank panel 210W: 1 piece (*Up to 2 units are available.)

(1)

(3)

(2)

(1) JIS pitch hole

(3) Blank panel (sold separately)

(2) EIA pitch hole

(4) Handles

3 External Appearance

RK-80: 5 units and Blank panel 35W: 5 pieces (*Up to 10 units are available. )

(1)

(4)

(3)

(2)

RK(400W): 3 units and Blank panel 70W: 3 pieces (*Up to 6 units are available.)

(1)

(3)

(2)

3 External Appearance

RMO series

CO series

CO-HV: 5 units and Blank panel 35W: 6 pieces (*Up to 11 units are available.)

(1)

(3)

(2)

ES series

ES: 4 units (*Up to 4 units are available.)

(1)

(2)

DRJ500 series

REKJ series

(1)

(3)

(2)

(1) JIS pitch hole

(3) Blank panel (sold separately)

(2) EIA pitch hole

DRJ500: 2 units and Blank panel 140W: 1 piece (*Up to 3 units are available.)

(1)

(3)

(2)

REKJ: 1 unit and Blank panel 210W: 1 piece (*Up to 2 units are available.)

3 External Appearance

RMO series

EJC series

EJC: 1 unit and Blank panel 212W: 1 piece (*Up to 2 units are available.)

(1)

(3)

(2)

EPR series

EPR: 3 units and Blank panel 84W: 2 pieces (*Up to 5 units are available.)

(1)

(2)

(3)

R4G series

EGD series

EGD: 3 units and Blank panel 84W: 2 pieces (*Up to 5 units are available.)

(1)

(2)

(3)

(1) JIS pitch hole

(3) Blank panel (sold separately)

(2) EIA pitch hole

R4G: 3 unitsand Blank panel 84W: 2pieces (*Up to 5 units are available.)

(1)

(2)

(3)

Tabla de contenidos

Manuales populares de Rack y soporte de otras marcas

Salamander

Salamander Acadia AC/W/L400/WH Manual de usuario

Fohhn

Fohhn VAT-09 Guía del usuario

ricoo

ricoo FS0522 Manual de usuario

AMSOIL

AMSOIL BMK-22 Guía rápida

Kargo Master

Kargo Master 48220 Manual de usuario

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manual de usuario

ricoo

ricoo S1222 Manual de usuario

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manual de usuario

VidaBox

VidaBox VB MNT FFS2 Manual de usuario

Welch Allyn

Welch Allyn 48960 Manual de usuario

Arkon

Arkon CM035-ST-2 Manual de usuario

PROEL

PROEL PLWIN60C Manual de usuario

Agilent Technologies

Agilent Technologies E2609B Manual de usuario

Mustang

Mustang MV-ARM4 Manual de usuario

Mounting Solutions

Mounting Solutions WRM-320 Manual de usuario

Pyle

Pyle PMKSPAD1 Manual de usuario

ShelterIt

ShelterIt 21208 Manual de usuario

SPL

SPL RackPack?4 1040 Manual de usuario